* [PATCH] iw: add a command for moving a STA into an AP VLAN
@ 2009-11-11 12:22 Felix Fietkau
2010-07-31 7:35 ` Javier Cardona
0 siblings, 1 reply; 2+ messages in thread
From: Felix Fietkau @ 2009-11-11 12:22 UTC (permalink / raw)
To: linux-wireless; +Cc: Johannes Berg
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/station.c
+++ b/station.c
@@ -196,7 +196,7 @@ COMMAND(station, del, "<MAC address>",
NL80211_CMD_DEL_STATION, 0, CIB_NETDEV, handle_station_get,
"Remove the given station entry (use with caution!)");
-static int handle_station_set(struct nl80211_state *state,
+static int handle_station_set_plink(struct nl80211_state *state,
struct nl_cb *cb,
struct nl_msg *msg,
int argc, char **argv)
@@ -241,9 +241,56 @@ static int handle_station_set(struct nl8
return -ENOBUFS;
}
COMMAND(station, set, "<MAC address> plink_action <open|block>",
- NL80211_CMD_SET_STATION, 0, CIB_NETDEV, handle_station_set,
+ NL80211_CMD_SET_STATION, 0, CIB_NETDEV, handle_station_set_plink,
"Set mesh peer link action for this station (peer).");
+static int handle_station_set_vlan(struct nl80211_state *state,
+ struct nl_cb *cb,
+ struct nl_msg *msg,
+ int argc, char **argv)
+{
+ unsigned char mac_addr[ETH_ALEN];
+ unsigned long sta_vlan = 0;
+ char *err = NULL;
+
+ if (argc < 3)
+ return 1;
+
+ if (mac_addr_a2n(mac_addr, argv[0])) {
+ fprintf(stderr, "invalid mac address\n");
+ return 2;
+ }
+ argc--;
+ argv++;
+
+ if (strcmp("vlan", argv[0]) != 0)
+ return 1;
+ argc--;
+ argv++;
+
+ sta_vlan = strtoul(argv[0], &err, 0);
+ if (err && *err) {
+ fprintf(stderr, "invalid vlan id\n");
+ return 2;
+ }
+ argc--;
+ argv++;
+
+ if (argc)
+ return 1;
+
+ NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr);
+ NLA_PUT_U32(msg, NL80211_ATTR_STA_VLAN, sta_vlan);
+
+ return 0;
+ nla_put_failure:
+ return -ENOBUFS;
+}
+COMMAND(station, set, "<MAC address> vlan <ifindex>",
+ NL80211_CMD_SET_STATION, 0, CIB_NETDEV, handle_station_set_vlan,
+ "Set an AP VLAN for this station.");
+
+
static int handle_station_dump(struct nl80211_state *state,
struct nl_cb *cb,
struct nl_msg *msg,
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] iw: add a command for moving a STA into an AP VLAN
2009-11-11 12:22 [PATCH] iw: add a command for moving a STA into an AP VLAN Felix Fietkau
@ 2010-07-31 7:35 ` Javier Cardona
0 siblings, 0 replies; 2+ messages in thread
From: Javier Cardona @ 2010-07-31 7:35 UTC (permalink / raw)
To: Felix Fietkau; +Cc: linux-wireless, Johannes Berg
Felix,
This patch apparently broke the plink_action commands. Any chance you
could rework it?
Thanks,
Javier
On Wed, Nov 11, 2009 at 2:22 PM, Felix Fietkau <nbd@openwrt.org> wrote:
> Signed-off-by: Felix Fietkau <nbd@openwrt.org>
> ---
>
> --- a/station.c
> +++ b/station.c
> @@ -196,7 +196,7 @@ COMMAND(station, del, "<MAC address>",
> NL80211_CMD_DEL_STATION, 0, CIB_NETDEV, handle_station_get,
> "Remove the given station entry (use with caution!)");
>
> -static int handle_station_set(struct nl80211_state *state,
> +static int handle_station_set_plink(struct nl80211_state *state,
> struct nl_cb *cb,
> struct nl_msg *msg,
> int argc, char **argv)
> @@ -241,9 +241,56 @@ static int handle_station_set(struct nl8
> return -ENOBUFS;
> }
> COMMAND(station, set, "<MAC address> plink_action <open|block>",
> - NL80211_CMD_SET_STATION, 0, CIB_NETDEV, handle_station_set,
> + NL80211_CMD_SET_STATION, 0, CIB_NETDEV, handle_station_set_plink,
> "Set mesh peer link action for this station (peer).");
>
> +static int handle_station_set_vlan(struct nl80211_state *state,
> + struct nl_cb *cb,
> + struct nl_msg *msg,
> + int argc, char **argv)
> +{
> + unsigned char mac_addr[ETH_ALEN];
> + unsigned long sta_vlan = 0;
> + char *err = NULL;
> +
> + if (argc < 3)
> + return 1;
> +
> + if (mac_addr_a2n(mac_addr, argv[0])) {
> + fprintf(stderr, "invalid mac address\n");
> + return 2;
> + }
> + argc--;
> + argv++;
> +
> + if (strcmp("vlan", argv[0]) != 0)
> + return 1;
> + argc--;
> + argv++;
> +
> + sta_vlan = strtoul(argv[0], &err, 0);
> + if (err && *err) {
> + fprintf(stderr, "invalid vlan id\n");
> + return 2;
> + }
> + argc--;
> + argv++;
> +
> + if (argc)
> + return 1;
> +
> + NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr);
> + NLA_PUT_U32(msg, NL80211_ATTR_STA_VLAN, sta_vlan);
> +
> + return 0;
> + nla_put_failure:
> + return -ENOBUFS;
> +}
> +COMMAND(station, set, "<MAC address> vlan <ifindex>",
> + NL80211_CMD_SET_STATION, 0, CIB_NETDEV, handle_station_set_vlan,
> + "Set an AP VLAN for this station.");
> +
> +
> static int handle_station_dump(struct nl80211_state *state,
> struct nl_cb *cb,
> struct nl_msg *msg,
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-07-31 7:35 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-11-11 12:22 [PATCH] iw: add a command for moving a STA into an AP VLAN Felix Fietkau
2010-07-31 7:35 ` Javier Cardona
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).