From: Ben Greear <greearb@candelatech.com>
To: Ryszard <ryszard99@gmail.com>
Cc: Florian Fainelli <florian@openwrt.org>,
Patrick McHardy <kaber@trash.net>,
linux-wireless@vger.kernel.org
Subject: Re: virtual access point setup
Date: Mon, 02 Aug 2010 21:56:10 -0700 [thread overview]
Message-ID: <4C57A16A.90501@candelatech.com> (raw)
In-Reply-To: <AANLkTik0Ebk6zcTi29pofUvzmVDmRwi4hthj+66k9-V0@mail.gmail.com>
On 08/02/2010 05:09 PM, Ryszard wrote:
> hey ben,
>
> here is a list of actions i've done just now to get the previously
> mentioned stack trace:
> ==============================================
> 1. restart box
> 2. uname -a Linux sknwireless 2.6.32-22-generic #33-Ubuntu SMP Wed Apr
> 28 13:27:30 UTC 2010 i586 GNU/Linux
> 3.lsmod:
> Module Size Used by
> ipt_REDIRECT 917 3
> ipt_MASQUERADE 1407 3
> xt_state 1098 6
> xt_tcpudp 2011 33
> iptable_filter 2271 1
> nf_nat_ftp 1836 0
> iptable_nat 4414 1
> ip_tables 9991 2 iptable_filter,iptable_nat
> nf_nat 15735 4
> ipt_REDIRECT,ipt_MASQUERADE,nf_nat_ftp,iptable_nat
> x_tables 14299 6
> ipt_REDIRECT,ipt_MASQUERADE,xt_state,xt_tcpudp,iptable_nat,ip_tables
> nf_conntrack_ftp 5381 1 nf_nat_ftp
> nf_conntrack_ipv4 10672 9 iptable_nat,nf_nat
> nf_conntrack 61583 7
> ipt_MASQUERADE,xt_state,nf_nat_ftp,iptable_nat,nf_nat,nf_conntrack_ftp,nf_conntrack_ipv4
> nf_defrag_ipv4 1073 1 nf_conntrack_ipv4
> arc4 1153 2
> aes_i586 7268 0
> ath5k 118956 0
> aes_generic 26863 1 aes_i586
> mac80211 206808 1 ath5k
> ath 7611 1 ath5k
> leds_alix2 1470 0
> geode_aes 4558 0
> cs5535_gpio 2571 0
> cfg80211 125477 3 ath5k,mac80211,ath
> geode_rng 1011 0
> led_class 2864 2 ath5k,leds_alix2
> pata_cs5536 3224 0
> pata_amd 8766 1
> via_rhine 19154 0
> mii 4381 1 via_rhine
>
> 4. rmmod ath5k
> 5. modprobe ath5k nohwcrypt=1
> 6. syslog shows no stack trace
> 7. iw dev wlan0 interface add sta0 type station
> 8. ifconfig sta0
> sta0 Link encap:Ethernet HWaddr 00:0b:6b:22:5b:cd
> BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> 9. iwconfig sta0
> sta0 IEEE 802.11abg ESSID:off/any
> Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
> Retry long limit:7 RTS thr:off Fragment thr:off
> Encryption key:off
> Power Management:off
> 10. no syslog stacktrace
> 11. iw dev wlan0 interface add vap0 type __ap
> 12. ifconfig vap0
> vap0 Link encap:Ethernet HWaddr 00:0b:6b:22:5b:cd
> BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> 13. iwconfig vap0
> vap0 IEEE 802.11abg Mode:Master Tx-Power=20 dBm
> Retry long limit:7 RTS thr:off Fragment thr:off
> Power Management:off
> 14. no syslog stacktrace
> 15. iw dev wlan0 interface add vap1 type __ap
> 16. ifconfig vap1
> vap1 Link encap:Ethernet HWaddr 00:0b:6b:22:5b:cd
> BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> 17. iwconfig vap1
> vap1 IEEE 802.11abg Mode:Master Tx-Power=20 dBm
> Retry long limit:7 RTS thr:off Fragment thr:off
> Power Management:off
> 18. no syslog stacktrace
> 19. ifconfig vap0 172.16.40.1 up
> SIOCSIFFLAGS: Name not unique on network
> SIOCSIFFLAGS: Name not unique on network
> 20. no syslog stacktrace
> 21 ifconfig vap1 172.16.40.1 up
> SIOCSIFFLAGS: Name not unique on network
> SIOCSIFFLAGS: Name not unique on network
> 22. no syslog stacktrace
> 23. macchanger vap0
> Current MAC: 00:0b:6b:22:5b:cd (Wistron Neweb Corp.)
> Faked MAC: 00:0b:6b:22:5b:ce (Wistron Neweb Corp.)
> 24. no syslog stacktrace
> 25. macchanger vap1
> Current MAC: 00:0b:6b:22:5b:cd (Wistron Neweb Corp.)
> Faked MAC: 00:0b:6b:22:5b:ce (Wistron Neweb Corp.)
> 26. no syslog stacktrace
> 27. ifconfig vap0 172.168.40.1 up
> 28. syslog stacktrace:
> Aug 3 10:04:03 sknwireless kernel: [ 908.740408] ------------[ cut
> here ]------------
> Aug 3 10:04:03 sknwireless kernel: [ 908.740479] WARNING: at
> /home/skn/wireless/compat-wireless-2.6.32.15/drivers/net/wireless/ath/ath5k/base.c:3221
It appears you are not using our 2.6.31.12 kernel. Our wifi patches never
made it upstream..so you have to use the kernel from our site to have any
chance of success.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
next prev parent reply other threads:[~2010-08-03 4:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-03 0:09 virtual access point setup Ryszard
2010-08-03 4:56 ` Ben Greear [this message]
[not found] ` <AANLkTi=vrwrqJwB+OH_d6kUWhqNN6LkzeUpuAktd=87H@mail.gmail.com>
[not found] ` <AANLkTim5ApsX4VwqR1+Fw1E-+iey8G5HMKgAXbXh+6zu@mail.gmail.com>
2010-08-03 15:10 ` Ben Greear
2010-08-03 20:05 ` Ryszard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C57A16A.90501@candelatech.com \
--to=greearb@candelatech.com \
--cc=florian@openwrt.org \
--cc=kaber@trash.net \
--cc=linux-wireless@vger.kernel.org \
--cc=ryszard99@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).