From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.nokia.com ([192.100.122.233]:21932 "EHLO mgw-mx06.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932640Ab0HKJBx (ORCPT ); Wed, 11 Aug 2010 05:01:53 -0400 Message-ID: <4C6266FE.5000904@nokia.com> Date: Wed, 11 Aug 2010 12:01:50 +0300 From: Roger Quadros MIME-Version: 1.0 To: ext Ohad Ben-Cohen CC: "linux-wireless@vger.kernel.org" , "linux-mmc@vger.kernel.org" , "linux-omap@vger.kernel.org" , Mark Brown , "linux-arm-kernel@lists.infradead.org" , Chikkature Rajashekar Madhusudhan , "Coelho Luciano (Nokia-MS/Helsinki)" , "akpm@linux-foundation.org" , San Mehat , Tony Lindgren , Nicolas Pitre , Pandita Vikram , Kalle Valo Subject: Re: [PATCH v3 9/9] omap: zoom: add mmc3/wl1271 device support References: <1281478348-24833-1-git-send-email-ohad@wizery.com> <1281478348-24833-10-git-send-email-ohad@wizery.com> <4C626140.3080107@nokia.com> In-Reply-To: <4C626140.3080107@nokia.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: On 08/11/2010 11:37 AM, Roger Quadros wrote: > On 08/11/2010 01:12 AM, ext Ohad Ben-Cohen wrote: >> Add MMC3 support on ZOOM, which has the wl1271 device hardwired to. >> >> The wl1271 is a 4-wire, 1.8V, embedded SDIO WLAN device with an >> external IRQ line, and power-controlled by a GPIO-based fixed regulator. >> >> Signed-off-by: Ohad Ben-Cohen >> --- >> arch/arm/mach-omap2/board-zoom-peripherals.c | 34 ++++++++++++++++++++++++++ >> 1 files changed, 34 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c >> index de88635..82776bc 100644 >> --- a/arch/arm/mach-omap2/board-zoom-peripherals.c >> +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c >> @@ -17,6 +17,8 @@ >> #include >> #include >> #include >> +#include >> +#include >> >> #include >> #include >> @@ -29,6 +31,7 @@ >> #include "hsmmc.h" >> >> #define OMAP_ZOOM_WLAN_PMENA_GPIO (101) >> +#define OMAP_ZOOM_WLAN_IRQ_GPIO (162) >> >> /* Zoom2 has Qwerty keyboard*/ >> static int board_keymap[] = { >> @@ -185,6 +188,28 @@ static struct platform_device omap_vwlan_device = { >> }, >> }; >> >> +struct wl12xx_platform_data omap_zoom_wlan_data = { >> + /* ZOOM ref clock is 26 MHz */ >> + .board_ref_clock = 1, >> +}; >> + >> +static struct resource omap_zoom_wl1271_resources[] = { >> + { >> + .start = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO), >> + .end = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO), >> + .flags = IORESOURCE_IRQ, >> + } >> +}; >> +static struct platform_device omap_zoom_wl1271 = { >> + .name = "wl1271_plat.2", >> + .id = -1, >> + .resource = omap_zoom_wl1271_resources, >> + .num_resources = ARRAY_SIZE(omap_zoom_wl1271_resources), >> + .dev = { >> + .platform_data =&omap_zoom_wlan_data, >> + }, >> +}; >> + >> static struct omap2_hsmmc_info mmc[] __initdata = { >> { >> .name = "external", >> @@ -202,6 +227,14 @@ static struct omap2_hsmmc_info mmc[] __initdata = { >> .nonremovable = true, >> .power_saving = true, >> }, >> + { >> + .name = "wl1271", >> + .mmc = 3, >> + .wires = 4, >> + .gpio_wp = -EINVAL, >> + .gpio_cd = -EINVAL, >> + .ocr_mask = MMC_VDD_165_195, > > Do we really need to specify ocr_mask here? > It seems to be set in omap_hsmmc_reg_get() by calling mmc_regulator_get_ocrmask(). > > This should automatically pick the right mask if you have defined the "vmmc" > regulator output voltage correctly. > Also shouldn't .nonremovable be set to true? as this is a non-removable card slot. regards, -roger