From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.nokia.com ([192.100.122.233]:30714 "EHLO mgw-mx06.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755692Ab0HKKG2 (ORCPT ); Wed, 11 Aug 2010 06:06:28 -0400 Message-ID: <4C6275F3.6030108@nokia.com> Date: Wed, 11 Aug 2010 13:05:39 +0300 From: Adrian Hunter MIME-Version: 1.0 To: Ohad Ben-Cohen CC: "linux-wireless@vger.kernel.org" , "linux-mmc@vger.kernel.org" , "linux-omap@vger.kernel.org" , Mark Brown , "linux-arm-kernel@lists.infradead.org" , Chikkature Rajashekar Madhusudhan , "Coelho Luciano (Nokia-MS/Helsinki)" , "akpm@linux-foundation.org" , San Mehat , "Quadros Roger (Nokia-MS/Helsinki)" , Tony Lindgren , Nicolas Pitre , Pandita Vikram , Kalle Valo Subject: Re: [PATCH v3 8/9] omap: hsmmc: split mmc23 power control References: <1281478348-24833-1-git-send-email-ohad@wizery.com> <1281478348-24833-9-git-send-email-ohad@wizery.com> In-Reply-To: <1281478348-24833-9-git-send-email-ohad@wizery.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: Ohad Ben-Cohen wrote: > Prepare for mmc3 regulator power control by splitting the power > control functions of mmc2 and mmc3, and expecting mmc3 to have > a single, dedicated, regulator support. Why? Can't the controller be connected to an eMMC with 2 power supplies? At a glance, it is not obvious why this patch is needed. > > Signed-off-by: Ohad Ben-Cohen > --- > arch/arm/mach-omap2/hsmmc.c | 10 ++++-- > drivers/mmc/host/omap_hsmmc.c | 67 ++++++++++++++++++++++++++++++++++++---- > 2 files changed, 66 insertions(+), 11 deletions(-) > > diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c > index 1ef54b0..5d3d789 100644 > --- a/arch/arm/mach-omap2/hsmmc.c > +++ b/arch/arm/mach-omap2/hsmmc.c > @@ -174,7 +174,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, > } > } > > -static void hsmmc23_before_set_reg(struct device *dev, int slot, > +static void hsmmc2_before_set_reg(struct device *dev, int slot, > int power_on, int vdd) > { > struct omap_mmc_platform_data *mmc = dev->platform_data; > @@ -325,14 +325,16 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) > c->transceiver = 1; > if (c->transceiver && c->wires > 4) > c->wires = 4; > - /* FALLTHROUGH */ > - case 3: > if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { > /* off-chip level shifting, or none */ > - mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; > + mmc->slots[0].before_set_reg = hsmmc2_before_set_reg; > mmc->slots[0].after_set_reg = NULL; > } > break; > + case 3: > + mmc->slots[0].before_set_reg = NULL; > + mmc->slots[0].after_set_reg = NULL; > + break; > default: > pr_err("MMC%d configuration not supported!\n", c->mmc); > kfree(mmc); > diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c > index d50e917..6f5cea0 100644 > --- a/drivers/mmc/host/omap_hsmmc.c > +++ b/drivers/mmc/host/omap_hsmmc.c > @@ -258,7 +258,7 @@ static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on, > return ret; > } > > -static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on, > +static int omap_hsmmc_2_set_power(struct device *dev, int slot, int power_on, > int vdd) > { > struct omap_hsmmc_host *host = > @@ -309,6 +309,31 @@ static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on, > return ret; > } > > +static int omap_hsmmc_3_set_power(struct device *dev, int slot, int power_on, > + int vdd) > +{ > + struct omap_hsmmc_host *host = > + platform_get_drvdata(to_platform_device(dev)); > + int ret = 0; > + > + if (power_on) { > + ret = mmc_regulator_set_ocr(host->vcc, vdd); > + /* Enable interface voltage rail, if needed */ > + if (ret == 0 && host->vcc) { > + ret = regulator_enable(host->vcc); > + if (ret < 0) > + ret = mmc_regulator_set_ocr(host->vcc, 0); > + } > + } else { > + if (host->vcc) > + ret = regulator_disable(host->vcc); > + if (ret == 0) > + ret = mmc_regulator_set_ocr(host->vcc, 0); > + } > + > + return ret; > +} > + > static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep, > int vdd, int cardsleep) > { > @@ -319,7 +344,7 @@ static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep, > return regulator_set_mode(host->vcc, mode); > } > > -static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep, > +static int omap_hsmmc_2_set_sleep(struct device *dev, int slot, int sleep, > int vdd, int cardsleep) > { > struct omap_hsmmc_host *host = > @@ -358,6 +383,31 @@ static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep, > return regulator_enable(host->vcc_aux); > } > > +static int omap_hsmmc_3_set_sleep(struct device *dev, int slot, int sleep, > + int vdd, int cardsleep) > +{ > + struct omap_hsmmc_host *host = > + platform_get_drvdata(to_platform_device(dev)); > + int err = 0; > + > + /* > + * If we don't see a Vcc regulator, assume it's a fixed > + * voltage always-on regulator. > + */ > + if (!host->vcc) > + return 0; > + > + if (cardsleep) { > + /* VCC can be turned off if card is asleep */ > + if (sleep) > + err = mmc_regulator_set_ocr(host->vcc, 0); > + else > + err = mmc_regulator_set_ocr(host->vcc, vdd); > + } > + > + return err; > +} > + > static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) > { > struct regulator *reg; > @@ -370,10 +420,13 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) > mmc_slot(host).set_sleep = omap_hsmmc_1_set_sleep; > break; > case OMAP_MMC2_DEVID: > - case OMAP_MMC3_DEVID: > /* Off-chip level shifting, or none */ > - mmc_slot(host).set_power = omap_hsmmc_23_set_power; > - mmc_slot(host).set_sleep = omap_hsmmc_23_set_sleep; > + mmc_slot(host).set_power = omap_hsmmc_2_set_power; > + mmc_slot(host).set_sleep = omap_hsmmc_2_set_sleep; > + break; > + case OMAP_MMC3_DEVID: > + mmc_slot(host).set_power = omap_hsmmc_3_set_power; > + mmc_slot(host).set_sleep = omap_hsmmc_3_set_sleep; > break; > default: > pr_err("MMC%d configuration not supported!\n", host->id); > @@ -386,9 +439,9 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) > /* > * HACK: until fixed.c regulator is usable, > * we don't require a main regulator > - * for MMC2 or MMC3 > + * for MMC2 > */ > - if (host->id == OMAP_MMC1_DEVID) { > + if (host->id != OMAP_MMC2_DEVID) { > ret = PTR_ERR(reg); > goto err; > }