linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: nbd@nbd.name
Cc: lorenzo.bianconi@redhat.com, sean.wang@mediatek.com,
	ryder.lee@mediatek.com, linux-wireless@vger.kernel.org,
	linux-mediatek@lists.infradead.org
Subject: [PATCH 11/12] mt76: mt7615: introduce rlm tlv in bss_info mcu command
Date: Thu,  2 Apr 2020 15:06:41 +0200	[thread overview]
Message-ID: <571a8321571203e8ee5cb395cdd069f2c40b893d.1585832459.git.lorenzo@kernel.org> (raw)
In-Reply-To: <cover.1585832458.git.lorenzo@kernel.org>

Introduce rlm tlv header in bss_info mcu command in order to
inform the mcu about operating channel. Rlm header is necessary only if
the mcu is running low power functionalities (e.g offloaded scan)

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7615/main.c  |   6 +-
 .../net/wireless/mediatek/mt76/mt7615/mcu.c   | 111 ++++++++++++++++--
 .../net/wireless/mediatek/mt76/mt7615/mcu.h   |   1 +
 .../wireless/mediatek/mt76/mt7615/mt7615.h    |   4 +-
 4 files changed, 104 insertions(+), 18 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index 2c2d763b667c..c91f0896b09f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -410,15 +410,15 @@ static void mt7615_bss_info_changed(struct ieee80211_hw *hw,
 				    u32 changed)
 {
 	struct mt7615_dev *dev = mt7615_hw_dev(hw);
+	struct mt7615_phy *phy = mt7615_hw_phy(hw);
 
 	mutex_lock(&dev->mt76.mutex);
 
 	if (changed & BSS_CHANGED_ASSOC)
-		mt7615_mcu_add_bss_info(dev, vif, info->assoc);
+		mt7615_mcu_add_bss_info(phy, vif, info->assoc);
 
 	if (changed & BSS_CHANGED_ERP_SLOT) {
 		int slottime = info->use_short_slot ? 9 : 20;
-		struct mt7615_phy *phy = mt7615_hw_phy(hw);
 
 		if (slottime != phy->slottime) {
 			phy->slottime = slottime;
@@ -427,7 +427,7 @@ static void mt7615_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (changed & BSS_CHANGED_BEACON_ENABLED) {
-		mt7615_mcu_add_bss_info(dev, vif, info->enable_beacon);
+		mt7615_mcu_add_bss_info(phy, vif, info->enable_beacon);
 		mt7615_mcu_sta_add(dev, vif, NULL, info->enable_beacon);
 	}
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index 5385d16e435d..9bb65de0cc64 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -967,10 +967,11 @@ mt7615_mcu_wtbl_ht_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
 }
 
 static int
-mt7615_mcu_add_bss(struct mt7615_dev *dev, struct ieee80211_vif *vif,
+mt7615_mcu_add_bss(struct mt7615_phy *phy, struct ieee80211_vif *vif,
 		   bool enable)
 {
 	struct mt7615_vif *mvif = (struct mt7615_vif *)vif->drv_priv;
+	struct mt7615_dev *dev = phy->dev;
 	struct sk_buff *skb;
 
 	skb = mt7615_mcu_alloc_sta_req(mvif, NULL);
@@ -1244,12 +1245,15 @@ mt7615_mcu_uni_ctrl_pm_state(struct mt7615_dev *dev, int band, int state)
 }
 
 static int
-mt7615_mcu_uni_add_bss(struct mt7615_dev *dev,
+mt7615_mcu_uni_add_bss(struct mt7615_phy *phy,
 		       struct ieee80211_vif *vif, bool enable)
 {
 	struct mt7615_vif *mvif = (struct mt7615_vif *)vif->drv_priv;
+	struct cfg80211_chan_def *chandef = &phy->mt76->chandef;
+	int freq1 = chandef->center_freq1, freq2 = chandef->center_freq2;
+	struct mt7615_dev *dev = phy->dev;
 	struct {
-		struct req_hdr {
+		struct {
 			u8 bss_idx;
 			u8 pad[3];
 		} __packed hdr;
@@ -1267,12 +1271,18 @@ mt7615_mcu_uni_add_bss(struct mt7615_dev *dev,
 			__le16 bmc_tx_wlan_idx;
 			__le16 bcn_interval;
 			u8 dtim_period;
-			u8 phymode;
+			u8 phymode; /* bit(0): A
+				     * bit(1): B
+				     * bit(2): G
+				     * bit(3): GN
+				     * bit(4): AN
+				     * bit(5): AC
+				     */
 			__le16 sta_idx;
 			u8 nonht_basic_phy;
 			u8 pad[3];
 		} __packed basic;
-	} req = {
+	} basic_req = {
 		.hdr = {
 			.bss_idx = mvif->idx,
 		},
@@ -1285,17 +1295,53 @@ mt7615_mcu_uni_add_bss(struct mt7615_dev *dev,
 			.band_idx = mvif->band_idx,
 			.wmm_idx = mvif->wmm_idx,
 			.active = enable,
+			.phymode = 0x38,
+		},
+	};
+	struct {
+		struct {
+			u8 bss_idx;
+			u8 pad[3];
+		} __packed hdr;
+		struct rlm_tlv {
+			__le16 tag;
+			__le16 len;
+			u8 control_channel;
+			u8 center_chan;
+			u8 center_chan2;
+			u8 bw;
+			u8 tx_streams;
+			u8 rx_streams;
+			u8 short_st;
+			u8 ht_op_info;
+			u8 sco;
+			u8 pad[3];
+		} __packed rlm;
+	} __packed rlm_req = {
+		.hdr = {
+			.bss_idx = mvif->idx,
+		},
+		.rlm = {
+			.tag = cpu_to_le16(UNI_BSS_INFO_RLM),
+			.len = cpu_to_le16(sizeof(struct rlm_tlv)),
+			.control_channel = chandef->chan->hw_value,
+			.center_chan = ieee80211_frequency_to_channel(freq1),
+			.center_chan2 = ieee80211_frequency_to_channel(freq2),
+			.tx_streams = hweight8(phy->mt76->antenna_mask),
+			.rx_streams = phy->chainmask,
+			.short_st = true,
 		},
 	};
 	u8 idx, tx_wlan_idx = 0;
+	int err;
 
 	idx = mvif->omac_idx > EXT_BSSID_START ? HW_BSSID_0 : mvif->omac_idx;
-	req.basic.hw_bss_idx = idx;
+	basic_req.basic.hw_bss_idx = idx;
 
 	switch (vif->type) {
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_AP:
-		req.basic.conn_type = cpu_to_le32(CONNECTION_INFRA_AP);
+		basic_req.basic.conn_type = cpu_to_le32(CONNECTION_INFRA_AP);
 		tx_wlan_idx = mvif->sta.wcid.idx;
 		break;
 	case NL80211_IFTYPE_STATION:
@@ -1314,20 +1360,59 @@ mt7615_mcu_uni_add_bss(struct mt7615_dev *dev,
 			tx_wlan_idx = msta->wcid.idx;
 			rcu_read_unlock();
 		}
-		req.basic.conn_type = cpu_to_le32(CONNECTION_INFRA_STA);
+		basic_req.basic.conn_type = cpu_to_le32(CONNECTION_INFRA_STA);
 		break;
 	default:
 		WARN_ON(1);
 		break;
 	}
 
-	memcpy(req.basic.bssid, vif->bss_conf.bssid, ETH_ALEN);
-	req.basic.bmc_tx_wlan_idx = cpu_to_le16(tx_wlan_idx);
-	req.basic.sta_idx = cpu_to_le16(tx_wlan_idx);
-	req.basic.conn_state = !enable;
+	memcpy(basic_req.basic.bssid, vif->bss_conf.bssid, ETH_ALEN);
+	basic_req.basic.bmc_tx_wlan_idx = cpu_to_le16(tx_wlan_idx);
+	basic_req.basic.sta_idx = cpu_to_le16(tx_wlan_idx);
+	basic_req.basic.conn_state = !enable;
+
+	err = __mt76_mcu_send_msg(&dev->mt76, MCU_UNI_CMD_BSS_INFO_UPDATE,
+				  &basic_req, sizeof(basic_req), true);
+	if (err < 0)
+		return err;
+
+	if (!mt7615_firmware_offload(dev))
+		return 0;
+
+	switch (chandef->width) {
+	case NL80211_CHAN_WIDTH_40:
+		rlm_req.rlm.bw = CMD_CBW_40MHZ;
+		break;
+	case NL80211_CHAN_WIDTH_80:
+		rlm_req.rlm.bw = CMD_CBW_80MHZ;
+		break;
+	case NL80211_CHAN_WIDTH_80P80:
+		rlm_req.rlm.bw = CMD_CBW_8080MHZ;
+		break;
+	case NL80211_CHAN_WIDTH_160:
+		rlm_req.rlm.bw = CMD_CBW_160MHZ;
+		break;
+	case NL80211_CHAN_WIDTH_5:
+		rlm_req.rlm.bw = CMD_CBW_5MHZ;
+		break;
+	case NL80211_CHAN_WIDTH_10:
+		rlm_req.rlm.bw = CMD_CBW_10MHZ;
+		break;
+	case NL80211_CHAN_WIDTH_20_NOHT:
+	case NL80211_CHAN_WIDTH_20:
+	default:
+		rlm_req.rlm.bw = CMD_CBW_20MHZ;
+		break;
+	}
+
+	if (rlm_req.rlm.control_channel < rlm_req.rlm.center_chan)
+		rlm_req.rlm.sco = 1; /* SCA */
+	else if (rlm_req.rlm.control_channel > rlm_req.rlm.center_chan)
+		rlm_req.rlm.sco = 3; /* SCB */
 
 	return __mt76_mcu_send_msg(&dev->mt76, MCU_UNI_CMD_BSS_INFO_UPDATE,
-				   &req, sizeof(req), true);
+				   &rlm_req, sizeof(rlm_req), true);
 }
 
 static int
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
index e6a927fd209f..43c13a47cea2 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
@@ -423,6 +423,7 @@ enum {
 
 enum {
 	UNI_BSS_INFO_BASIC = 0,
+	UNI_BSS_INFO_RLM = 2,
 	UNI_BSS_INFO_BCN_CONTENT = 7,
 };
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
index ab2cd23e6f70..8c3751a642af 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
@@ -164,7 +164,7 @@ struct mt7615_phy {
 #define mt7615_mcu_add_rx_ba(dev, ...)	(dev)->mcu_ops->add_rx_ba((dev), __VA_ARGS__)
 #define mt7615_mcu_sta_add(dev, ...)	(dev)->mcu_ops->sta_add((dev),  __VA_ARGS__)
 #define mt7615_mcu_add_dev_info(dev, ...) (dev)->mcu_ops->add_dev_info((dev),  __VA_ARGS__)
-#define mt7615_mcu_add_bss_info(dev, ...) (dev)->mcu_ops->add_bss_info((dev),  __VA_ARGS__)
+#define mt7615_mcu_add_bss_info(phy, ...) (phy->dev)->mcu_ops->add_bss_info((phy),  __VA_ARGS__)
 #define mt7615_mcu_add_beacon(dev, ...)	(dev)->mcu_ops->add_beacon_offload((dev),  __VA_ARGS__)
 #define mt7615_mcu_set_pm(dev, ...)	(dev)->mcu_ops->set_pm_state((dev),  __VA_ARGS__)
 struct mt7615_mcu_ops {
@@ -179,7 +179,7 @@ struct mt7615_mcu_ops {
 		       struct ieee80211_sta *sta, bool enable);
 	int (*add_dev_info)(struct mt7615_dev *dev,
 			    struct ieee80211_vif *vif, bool enable);
-	int (*add_bss_info)(struct mt7615_dev *dev, struct ieee80211_vif *vif,
+	int (*add_bss_info)(struct mt7615_phy *phy, struct ieee80211_vif *vif,
 			    bool enable);
 	int (*add_beacon_offload)(struct mt7615_dev *dev,
 				  struct ieee80211_hw *hw,
-- 
2.25.1


  parent reply	other threads:[~2020-04-02 13:08 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-02 13:06 [PATCH 00/12] mt7663 driver update Lorenzo Bianconi
2020-04-02 13:06 ` [PATCH 01/12] mt76: mt7663: fix mt7615_mac_cca_stats_reset routine Lorenzo Bianconi
2020-04-02 13:06 ` [PATCH 02/12] mt76: mt7663: enable nf estimation Lorenzo Bianconi
2020-04-02 13:06 ` [PATCH 03/12] mt76: mt7615: make scs configurable per chain Lorenzo Bianconi
2020-04-02 13:06 ` [PATCH 04/12] mt76: mt7663: disable RDD commands Lorenzo Bianconi
2020-04-02 13:06 ` [PATCH 05/12] mt76: mt7615: add ethool support to mt7663 driver Lorenzo Bianconi
2020-04-02 13:06 ` [PATCH 06/12] mt76: mt7615: introduce mt7615_mcu_set_channel_domain mcu command Lorenzo Bianconi
2020-04-02 13:06 ` [PATCH 07/12] mt76: mt7663: keep Rx filters as the default Lorenzo Bianconi
2020-04-02 13:06 ` [PATCH 08/12] mt76: mt7615: introduce hw scan support Lorenzo Bianconi
2020-04-02 13:06 ` [PATCH 09/12] mt76: mt7615: introduce scheduled " Lorenzo Bianconi
2020-04-02 13:06 ` [PATCH 10/12] mt76: mt7615: introduce BSS absence event Lorenzo Bianconi
2020-04-02 13:06 ` Lorenzo Bianconi [this message]
2020-04-02 13:06 ` [PATCH 12/12] mt76: mt7615: remove unnecessary register operations Lorenzo Bianconi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=571a8321571203e8ee5cb395cdd069f2c40b893d.1585832459.git.lorenzo@kernel.org \
    --to=lorenzo@kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=nbd@nbd.name \
    --cc=ryder.lee@mediatek.com \
    --cc=sean.wang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).