[PATCH v3 0/2] add fw coredump for sdio when firmware assert

[PATCH v3 0/2] add fw coredump for sdio when firmware assert

[Wen Gong]

add fw coredump for sdio when firmware assert

Wen Gong (2):
  ath10k: add bus type for each layout of coredump
v2: change code style
v3: split bus type to another patch, 
remove ATH10K_BUS_ANY, 
add bus type for each layout
  ath10k: add fw coredump for sdio when firmware assert
v2: change code style
v3: add commit log for fastdump, 
add commit log for ath10k_sdio_hif_diag_read,
change ath10k_err to dbg log

 drivers/net/wireless/ath/ath10k/bmi.c       |   1 +
 drivers/net/wireless/ath/ath10k/core.c      |   4 +
 drivers/net/wireless/ath/ath10k/coredump.c  | 348 +++++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/coredump.h  |   1 +
 drivers/net/wireless/ath/ath10k/sdio.c      | 338 ++++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/targaddrs.h |  10 +
 6 files changed, 697 insertions(+), 5 deletions(-)

-- 
1.9.1

[PATCH v3 1/2] ath10k: add bus type for each layout of coredump

[Wen Gong]

For some hw version, it has more than one bus type, it need to add bus
type to distinguish different chip.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00018-QCARMSWP-1.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
---
v2: change code style
v3: split bus type to another patch, 
remove ATH10K_BUS_ANY, 
add bus type for each layout
 drivers/net/wireless/ath/ath10k/coredump.c | 15 ++++++++++++++-
 drivers/net/wireless/ath/ath10k/coredump.h |  1 +
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/coredump.c b/drivers/net/wireless/ath/ath10k/coredump.c
index b6d2932..abc133d 100644
--- a/drivers/net/wireless/ath/ath10k/coredump.c
+++ b/drivers/net/wireless/ath/ath10k/coredump.c
@@ -955,6 +955,7 @@
 	{
 		.hw_id = QCA6174_HW_1_0_VERSION,
 		.hw_rev = ATH10K_HW_QCA6174,
+		.bus = ATH10K_BUS_PCI,
 		.region_table = {
 			.regions = qca6174_hw10_mem_regions,
 			.size = ARRAY_SIZE(qca6174_hw10_mem_regions),
@@ -963,6 +964,7 @@
 	{
 		.hw_id = QCA6174_HW_1_1_VERSION,
 		.hw_rev = ATH10K_HW_QCA6174,
+		.bus = ATH10K_BUS_PCI,
 		.region_table = {
 			.regions = qca6174_hw10_mem_regions,
 			.size = ARRAY_SIZE(qca6174_hw10_mem_regions),
@@ -971,6 +973,7 @@
 	{
 		.hw_id = QCA6174_HW_1_3_VERSION,
 		.hw_rev = ATH10K_HW_QCA6174,
+		.bus = ATH10K_BUS_PCI,
 		.region_table = {
 			.regions = qca6174_hw10_mem_regions,
 			.size = ARRAY_SIZE(qca6174_hw10_mem_regions),
@@ -979,6 +982,7 @@
 	{
 		.hw_id = QCA6174_HW_2_1_VERSION,
 		.hw_rev = ATH10K_HW_QCA6174,
+		.bus = ATH10K_BUS_PCI,
 		.region_table = {
 			.regions = qca6174_hw21_mem_regions,
 			.size = ARRAY_SIZE(qca6174_hw21_mem_regions),
@@ -987,6 +991,7 @@
 	{
 		.hw_id = QCA6174_HW_3_0_VERSION,
 		.hw_rev = ATH10K_HW_QCA6174,
+		.bus = ATH10K_BUS_PCI,
 		.region_table = {
 			.regions = qca6174_hw30_mem_regions,
 			.size = ARRAY_SIZE(qca6174_hw30_mem_regions),
@@ -995,6 +1000,7 @@
 	{
 		.hw_id = QCA6174_HW_3_2_VERSION,
 		.hw_rev = ATH10K_HW_QCA6174,
+		.bus = ATH10K_BUS_PCI,
 		.region_table = {
 			.regions = qca6174_hw30_mem_regions,
 			.size = ARRAY_SIZE(qca6174_hw30_mem_regions),
@@ -1003,6 +1009,7 @@
 	{
 		.hw_id = QCA9377_HW_1_1_DEV_VERSION,
 		.hw_rev = ATH10K_HW_QCA9377,
+		.bus = ATH10K_BUS_PCI,
 		.region_table = {
 			.regions = qca6174_hw30_mem_regions,
 			.size = ARRAY_SIZE(qca6174_hw30_mem_regions),
@@ -1011,6 +1018,7 @@
 	{
 		.hw_id = QCA988X_HW_2_0_VERSION,
 		.hw_rev = ATH10K_HW_QCA988X,
+		.bus = ATH10K_BUS_PCI,
 		.region_table = {
 			.regions = qca988x_hw20_mem_regions,
 			.size = ARRAY_SIZE(qca988x_hw20_mem_regions),
@@ -1019,6 +1027,7 @@
 	{
 		.hw_id = QCA9984_HW_1_0_DEV_VERSION,
 		.hw_rev = ATH10K_HW_QCA9984,
+		.bus = ATH10K_BUS_PCI,
 		.region_table = {
 			.regions = qca9984_hw10_mem_regions,
 			.size = ARRAY_SIZE(qca9984_hw10_mem_regions),
@@ -1027,6 +1036,7 @@
 	{
 		.hw_id = QCA9888_HW_2_0_DEV_VERSION,
 		.hw_rev = ATH10K_HW_QCA9888,
+		.bus = ATH10K_BUS_PCI,
 		.region_table = {
 			.regions = qca9984_hw10_mem_regions,
 			.size = ARRAY_SIZE(qca9984_hw10_mem_regions),
@@ -1035,6 +1045,7 @@
 	{
 		.hw_id = QCA99X0_HW_2_0_DEV_VERSION,
 		.hw_rev = ATH10K_HW_QCA99X0,
+		.bus = ATH10K_BUS_PCI,
 		.region_table = {
 			.regions = qca99x0_hw20_mem_regions,
 			.size = ARRAY_SIZE(qca99x0_hw20_mem_regions),
@@ -1043,6 +1054,7 @@
 	{
 		.hw_id = QCA4019_HW_1_0_DEV_VERSION,
 		.hw_rev = ATH10K_HW_QCA4019,
+		.bus = ATH10K_BUS_AHB,
 		.region_table = {
 			.regions = qca4019_hw10_mem_regions,
 			.size = ARRAY_SIZE(qca4019_hw10_mem_regions),
@@ -1090,7 +1102,8 @@ const struct ath10k_hw_mem_layout *ath10k_coredump_get_mem_layout(struct ath10k
 
 	for (i = 0; i < ARRAY_SIZE(hw_mem_layouts); i++) {
 		if (ar->target_version == hw_mem_layouts[i].hw_id &&
-		    ar->hw_rev == hw_mem_layouts[i].hw_rev)
+		    ar->hw_rev == hw_mem_layouts[i].hw_rev &&
+		    hw_mem_layouts[i].bus == ar->hif.bus)
 			return &hw_mem_layouts[i];
 	}
 
diff --git a/drivers/net/wireless/ath/ath10k/coredump.h b/drivers/net/wireless/ath/ath10k/coredump.h
index 09de419..b191746 100644
--- a/drivers/net/wireless/ath/ath10k/coredump.h
+++ b/drivers/net/wireless/ath/ath10k/coredump.h
@@ -155,6 +155,7 @@ struct ath10k_mem_region {
 struct ath10k_hw_mem_layout {
 	u32 hw_id;
 	u32 hw_rev;
+	enum ath10k_bus bus;
 
 	struct {
 		const struct ath10k_mem_region *regions;
-- 
1.9.1

[PATCH v3 2/2] ath10k: add fw coredump for sdio when firmware assert

[Wen Gong]

When firmware assert, it need coredump to analyze, this patch will
collect the register and memory info for sdio chip.

The coredump configuration is different between PCIE and SDIO for
the same reversion, so this patch add bus type to distinguish PCIE
and SDIO chip for coredump.

It has 2 type to dump firmware: fastdump and slowdump. Fastdump is
not support in old version firmware, if this, ath10k will select
slowdump for it. If firmware support fastdump, ath10k will select
fastdump for it. Version WLAN.RMH.4.4.1-00017-QCARMSWPZ-2 of
firmware begin to support fastdump.

For slow dump, ath10k_sdio_hif_diag_read can not be used, the diag
window has a limit value, it is 4 bytes and the dump's buffer length
is larger than it, it will trigger error. So this patch add
ath10k_sdio_read_mem to read 4 bytes for each time.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00018-QCARMSWP-1.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
---
v2: change code style
v3: add commit log for fastdump, 
add commit log for ath10k_sdio_hif_diag_read,
change ath10k_err to dbg log
 drivers/net/wireless/ath/ath10k/bmi.c       |   1 +
 drivers/net/wireless/ath/ath10k/core.c      |   4 +
 drivers/net/wireless/ath/ath10k/coredump.c  | 333 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/sdio.c      | 338 +++++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/targaddrs.h |  10 +
 5 files changed, 682 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/bmi.c b/drivers/net/wireless/ath/ath10k/bmi.c
index 95dc4be..990fa4d 100644
--- a/drivers/net/wireless/ath/ath10k/bmi.c
+++ b/drivers/net/wireless/ath/ath10k/bmi.c
@@ -197,6 +197,7 @@ int ath10k_bmi_read_memory(struct ath10k *ar,
 
 	return 0;
 }
+EXPORT_SYMBOL(ath10k_bmi_read_memory);
 
 int ath10k_bmi_write_soc_reg(struct ath10k *ar, u32 address, u32 reg_val)
 {
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index dc45d16..c4595f8 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -708,6 +708,10 @@ static void ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode)
 	ath10k_bmi_read32(ar, hi_option_flag, &param);
 	param |= HI_OPTION_DISABLE_DBGLOG;
 	ath10k_bmi_write32(ar, hi_option_flag, param);
+
+	ath10k_bmi_read32(ar, hi_option_flag2, &param);
+	param |= HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_HOST;
+	ath10k_bmi_write32(ar, hi_option_flag2, param);
 }
 
 static int ath10k_init_configure_target(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/coredump.c b/drivers/net/wireless/ath/ath10k/coredump.c
index abc133d..24c5c63 100644
--- a/drivers/net/wireless/ath/ath10k/coredump.c
+++ b/drivers/net/wireless/ath/ath10k/coredump.c
@@ -270,6 +270,277 @@
 	{0x80010, 0x80020},
 };
 
+static const struct ath10k_mem_section qca6174_hw30_sdio_register_sections[] = {
+	{0x800, 0x810},
+	{0x820, 0x82C},
+	{0x830, 0x8F4},
+	{0x90C, 0x91C},
+	{0xA14, 0xA18},
+	{0xA84, 0xA94},
+	{0xAA8, 0xAD4},
+	{0xADC, 0xB40},
+	{0x1000, 0x10A4},
+	{0x10BC, 0x111C},
+	{0x1134, 0x1138},
+	{0x1144, 0x114C},
+	{0x1150, 0x115C},
+	{0x1160, 0x1178},
+	{0x1240, 0x1260},
+	{0x2000, 0x207C},
+	{0x3000, 0x3014},
+	{0x4000, 0x4014},
+	{0x5000, 0x5124},
+	{0x6000, 0x6040},
+	{0x6080, 0x60CC},
+	{0x6100, 0x611C},
+	{0x6140, 0x61D8},
+	{0x6200, 0x6238},
+	{0x6240, 0x628C},
+	{0x62C0, 0x62EC},
+	{0x6380, 0x63E8},
+	{0x6400, 0x6440},
+	{0x6480, 0x64CC},
+	{0x6500, 0x651C},
+	{0x6540, 0x6580},
+	{0x6600, 0x6638},
+	{0x6640, 0x668C},
+	{0x66C0, 0x66EC},
+	{0x6780, 0x67E8},
+	{0x7080, 0x708C},
+	{0x70C0, 0x70C8},
+	{0x7400, 0x741C},
+	{0x7440, 0x7454},
+	{0x7800, 0x7818},
+	{0x8010, 0x8060},
+	{0x8080, 0x8084},
+	{0x80A0, 0x80A4},
+	{0x80C0, 0x80C4},
+	{0x80E0, 0x80ec},
+	{0x8110, 0x8128},
+	{0x9000, 0x9004},
+	{0xF000, 0xF0E0},
+	{0xF140, 0xF190},
+	{0xF250, 0xF25C},
+	{0xF260, 0xF268},
+	{0xF26C, 0xF2A8},
+	{0x10008, 0x1000C},
+	{0x10014, 0x10018},
+	{0x1001C, 0x10020},
+	{0x10024, 0x10028},
+	{0x10030, 0x10034},
+	{0x10040, 0x10054},
+	{0x10058, 0x1007C},
+	{0x10080, 0x100C4},
+	{0x100C8, 0x10114},
+	{0x1012C, 0x10130},
+	{0x10138, 0x10144},
+	{0x10200, 0x10220},
+	{0x10230, 0x10250},
+	{0x10260, 0x10280},
+	{0x10290, 0x102B0},
+	{0x102C0, 0x102DC},
+	{0x102E0, 0x102F4},
+	{0x102FC, 0x1037C},
+	{0x10380, 0x10390},
+	{0x10800, 0x10828},
+	{0x10840, 0x10844},
+	{0x10880, 0x10884},
+	{0x108C0, 0x108E8},
+	{0x10900, 0x10928},
+	{0x10940, 0x10944},
+	{0x10980, 0x10984},
+	{0x109C0, 0x109E8},
+	{0x10A00, 0x10A28},
+	{0x10A40, 0x10A50},
+	{0x11000, 0x11028},
+	{0x11030, 0x11034},
+	{0x11038, 0x11068},
+	{0x11070, 0x11074},
+	{0x11078, 0x110A8},
+	{0x110B0, 0x110B4},
+	{0x110B8, 0x110E8},
+	{0x110F0, 0x110F4},
+	{0x110F8, 0x11128},
+	{0x11138, 0x11144},
+	{0x11178, 0x11180},
+	{0x111B8, 0x111C0},
+	{0x111F8, 0x11200},
+	{0x11238, 0x1123C},
+	{0x11270, 0x11274},
+	{0x11278, 0x1127C},
+	{0x112B0, 0x112B4},
+	{0x112B8, 0x112BC},
+	{0x112F0, 0x112F4},
+	{0x112F8, 0x112FC},
+	{0x11338, 0x1133C},
+	{0x11378, 0x1137C},
+	{0x113B8, 0x113BC},
+	{0x113F8, 0x113FC},
+	{0x11438, 0x11440},
+	{0x11478, 0x11480},
+	{0x114B8, 0x114BC},
+	{0x114F8, 0x114FC},
+	{0x11538, 0x1153C},
+	{0x11578, 0x1157C},
+	{0x115B8, 0x115BC},
+	{0x115F8, 0x115FC},
+	{0x11638, 0x1163C},
+	{0x11678, 0x1167C},
+	{0x116B8, 0x116BC},
+	{0x116F8, 0x116FC},
+	{0x11738, 0x1173C},
+	{0x11778, 0x1177C},
+	{0x117B8, 0x117BC},
+	{0x117F8, 0x117FC},
+	{0x17000, 0x1701C},
+	{0x17020, 0x170AC},
+	{0x18000, 0x18050},
+	{0x18054, 0x18074},
+	{0x18080, 0x180D4},
+	{0x180DC, 0x18104},
+	{0x18108, 0x1813C},
+	{0x18144, 0x18148},
+	{0x18168, 0x18174},
+	{0x18178, 0x18180},
+	{0x181C8, 0x181E0},
+	{0x181E4, 0x181E8},
+	{0x181EC, 0x1820C},
+	{0x1825C, 0x18280},
+	{0x18284, 0x18290},
+	{0x18294, 0x182A0},
+	{0x18300, 0x18304},
+	{0x18314, 0x18320},
+	{0x18328, 0x18350},
+	{0x1835C, 0x1836C},
+	{0x18370, 0x18390},
+	{0x18398, 0x183AC},
+	{0x183BC, 0x183D8},
+	{0x183DC, 0x183F4},
+	{0x18400, 0x186F4},
+	{0x186F8, 0x1871C},
+	{0x18720, 0x18790},
+	{0x19800, 0x19830},
+	{0x19834, 0x19840},
+	{0x19880, 0x1989C},
+	{0x198A4, 0x198B0},
+	{0x198BC, 0x19900},
+	{0x19C00, 0x19C88},
+	{0x19D00, 0x19D20},
+	{0x19E00, 0x19E7C},
+	{0x19E80, 0x19E94},
+	{0x19E98, 0x19EAC},
+	{0x19EB0, 0x19EBC},
+	{0x19F70, 0x19F74},
+	{0x19F80, 0x19F8C},
+	{0x19FA0, 0x19FB4},
+	{0x19FC0, 0x19FD8},
+	{0x1A000, 0x1A200},
+	{0x1A204, 0x1A210},
+	{0x1A228, 0x1A22C},
+	{0x1A230, 0x1A248},
+	{0x1A250, 0x1A270},
+	{0x1A280, 0x1A290},
+	{0x1A2A0, 0x1A2A4},
+	{0x1A2C0, 0x1A2EC},
+	{0x1A300, 0x1A3BC},
+	{0x1A3F0, 0x1A3F4},
+	{0x1A3F8, 0x1A434},
+	{0x1A438, 0x1A444},
+	{0x1A448, 0x1A468},
+	{0x1A580, 0x1A58C},
+	{0x1A644, 0x1A654},
+	{0x1A670, 0x1A698},
+	{0x1A6AC, 0x1A6B0},
+	{0x1A6D0, 0x1A6D4},
+	{0x1A6EC, 0x1A70C},
+	{0x1A710, 0x1A738},
+	{0x1A7C0, 0x1A7D0},
+	{0x1A7D4, 0x1A7D8},
+	{0x1A7DC, 0x1A7E4},
+	{0x1A7F0, 0x1A7F8},
+	{0x1A888, 0x1A89C},
+	{0x1A8A8, 0x1A8AC},
+	{0x1A8C0, 0x1A8DC},
+	{0x1A8F0, 0x1A8FC},
+	{0x1AE04, 0x1AE08},
+	{0x1AE18, 0x1AE24},
+	{0x1AF80, 0x1AF8C},
+	{0x1AFA0, 0x1AFB4},
+	{0x1B000, 0x1B200},
+	{0x1B284, 0x1B288},
+	{0x1B2D0, 0x1B2D8},
+	{0x1B2DC, 0x1B2EC},
+	{0x1B300, 0x1B340},
+	{0x1B374, 0x1B378},
+	{0x1B380, 0x1B384},
+	{0x1B388, 0x1B38C},
+	{0x1B404, 0x1B408},
+	{0x1B420, 0x1B428},
+	{0x1B440, 0x1B444},
+	{0x1B448, 0x1B44C},
+	{0x1B450, 0x1B458},
+	{0x1B45C, 0x1B468},
+	{0x1B584, 0x1B58C},
+	{0x1B68C, 0x1B690},
+	{0x1B6AC, 0x1B6B0},
+	{0x1B7F0, 0x1B7F8},
+	{0x1C800, 0x1CC00},
+	{0x1CE00, 0x1CE04},
+	{0x1CF80, 0x1CF84},
+	{0x1D200, 0x1D800},
+	{0x1E000, 0x20014},
+	{0x20100, 0x20124},
+	{0x21400, 0x217A8},
+	{0x21800, 0x21BA8},
+	{0x21C00, 0x21FA8},
+	{0x22000, 0x223A8},
+	{0x22400, 0x227A8},
+	{0x22800, 0x22BA8},
+	{0x22C00, 0x22FA8},
+	{0x23000, 0x233A8},
+	{0x24000, 0x24034},
+
+	/* EFUSE0,1,2 is disabled here
+	 * because its state may be reset
+	 *
+	 * {0x24800, 0x24804},
+	 * {0x25000, 0x25004},
+	 * {0x25800, 0x25804},
+	 */
+
+	{0x26000, 0x26064},
+	{0x27000, 0x27024},
+	{0x34000, 0x3400C},
+	{0x34400, 0x3445C},
+	{0x34800, 0x3485C},
+	{0x34C00, 0x34C5C},
+	{0x35000, 0x3505C},
+	{0x35400, 0x3545C},
+	{0x35800, 0x3585C},
+	{0x35C00, 0x35C5C},
+	{0x36000, 0x3605C},
+	{0x38000, 0x38064},
+	{0x38070, 0x380E0},
+	{0x3A000, 0x3A074},
+
+	/* DBI windows is skipped here, it can be only accessed when pcie
+	 * is active (not in reset) and CORE_CTRL_PCIE_LTSSM_EN = 0 &&
+	 * PCIE_CTRL_APP_LTSSM_ENALBE=0.
+	 * {0x3C000 , 0x3C004},
+	 */
+
+	{0x40000, 0x400A4},
+
+	/* SI register is skiped here.
+	 * Because it will cause bus hang
+	 *
+	 * {0x50000, 0x50018},
+	 */
+
+	{0x80000, 0x8000C},
+	{0x80010, 0x80020},
+};
+
 static const struct ath10k_mem_section qca6174_hw30_register_sections[] = {
 	{0x800, 0x810},
 	{0x820, 0x82C},
@@ -602,6 +873,59 @@
 	},
 };
 
+static const struct ath10k_mem_region qca6174_hw30_sdio_mem_regions[] = {
+	{
+		.type = ATH10K_MEM_REGION_TYPE_DRAM,
+		.start = 0x400000,
+		.len = 0xa8000,
+		.name = "DRAM",
+		.section_table = {
+			.sections = NULL,
+			.size = 0,
+		},
+	},
+	{
+		.type = ATH10K_MEM_REGION_TYPE_AXI,
+		.start = 0xa0000,
+		.len = 0x18000,
+		.name = "AXI",
+		.section_table = {
+			.sections = NULL,
+			.size = 0,
+		},
+	},
+	{
+		.type = ATH10K_MEM_REGION_TYPE_IRAM1,
+		.start = 0x00980000,
+		.len = 0x00080000,
+		.name = "IRAM1",
+		.section_table = {
+			.sections = NULL,
+			.size = 0,
+		},
+	},
+	{
+		.type = ATH10K_MEM_REGION_TYPE_IRAM2,
+		.start = 0x00a00000,
+		.len = 0x00040000,
+		.name = "IRAM2",
+		.section_table = {
+			.sections = NULL,
+			.size = 0,
+		},
+	},
+	{
+		.type = ATH10K_MEM_REGION_TYPE_REG,
+		.start = 0x800,
+		.len = 0x80020 - 0x800,
+		.name = "REG_TOTAL",
+		.section_table = {
+			.sections = qca6174_hw30_sdio_register_sections,
+			.size = ARRAY_SIZE(qca6174_hw30_sdio_register_sections),
+		},
+	},
+};
+
 static const struct ath10k_mem_region qca6174_hw30_mem_regions[] = {
 	{
 		.type = ATH10K_MEM_REGION_TYPE_DRAM,
@@ -1007,6 +1331,15 @@
 		},
 	},
 	{
+		.hw_id = QCA6174_HW_3_2_VERSION,
+		.hw_rev = ATH10K_HW_QCA6174,
+		.bus = ATH10K_BUS_SDIO,
+		.region_table = {
+			.regions = qca6174_hw30_sdio_mem_regions,
+			.size = ARRAY_SIZE(qca6174_hw30_sdio_mem_regions),
+		},
+	},
+	{
 		.hw_id = QCA9377_HW_1_1_DEV_VERSION,
 		.hw_rev = ATH10K_HW_QCA9377,
 		.bus = ATH10K_BUS_PCI,
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 8ed4fbd..0c10df6 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -23,6 +23,9 @@
 #include "targaddrs.h"
 #include "trace.h"
 #include "sdio.h"
+#include "coredump.h"
+
+void ath10k_sdio_fw_crashed_dump(struct ath10k *ar);
 
 /* inlined helper functions */
 
@@ -859,10 +862,9 @@ static int ath10k_sdio_mbox_proc_cpu_intr(struct ath10k *ar)
 
 out:
 	mutex_unlock(&irq_data->mtx);
-	if (cpu_int_status & MBOX_CPU_STATUS_ENABLE_ASSERT_MASK) {
-		ath10k_err(ar, "firmware crashed!\n");
-		queue_work(ar->workqueue, &ar->restart_work);
-	}
+	if (cpu_int_status & MBOX_CPU_STATUS_ENABLE_ASSERT_MASK)
+		ath10k_sdio_fw_crashed_dump(ar);
+
 	return ret;
 }
 
@@ -1967,6 +1969,334 @@ static SIMPLE_DEV_PM_OPS(ath10k_sdio_pm_ops, ath10k_sdio_pm_suspend,
 
 #endif /* CONFIG_PM_SLEEP */
 
+static int ath10k_sdio_read_host_interest_value(struct ath10k *ar,
+						u32 item_offset,
+						u32 *val)
+{
+	u32 addr;
+	int ret;
+
+	addr = host_interest_item_address(item_offset);
+
+	ret = ath10k_sdio_hif_diag_read32(ar, addr, val);
+
+	if (ret)
+		ath10k_warn(ar, "unable to read host interest offset %d value\n",
+			    item_offset);
+
+	return ret;
+}
+
+static int ath10k_sdio_read_mem(struct ath10k *ar, u32 address, void *buf,
+				u32 buf_len)
+{
+	u32 val;
+	int i, ret;
+
+	for (i = 0; i < buf_len; i += 4) {
+		ret = ath10k_sdio_hif_diag_read32(ar, address + i, &val);
+		if (ret) {
+			ath10k_warn(ar, "unable to read mem %d value\n", address + i);
+			break;
+		}
+		memcpy(buf + i, &val, 4);
+	}
+
+	return ret;
+}
+
+static void ath10k_sdio_check_fw_reg(struct ath10k *ar, u32 *fast_dump)
+{
+	u32 param;
+
+	ath10k_sdio_read_host_interest_value(ar, HI_ITEM(hi_option_flag2), &param);
+
+	*fast_dump = ((param & HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_FW)
+			     == HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_FW);
+
+	ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio hi_option_flag2 %x\n", param);
+}
+
+static void ath10k_sdio_dump_registers(struct ath10k *ar,
+				       struct ath10k_fw_crash_data *crash_data,
+				       u32 fast_dump)
+{
+	u32 reg_dump_values[REG_DUMP_COUNT_QCA988X] = {};
+	int i, ret;
+	u32 reg_dump_area;
+
+	ret = ath10k_sdio_read_host_interest_value(ar, HI_ITEM(hi_failure_state),
+						   &reg_dump_area);
+	if (ret) {
+		ath10k_err(ar, "failed to read firmware dump area: %d\n", ret);
+		return;
+	}
+
+	if (fast_dump)
+		ret = ath10k_bmi_read_memory(ar, reg_dump_area, reg_dump_values,
+					     sizeof(reg_dump_values));
+	else
+		ret = ath10k_sdio_read_mem(ar, reg_dump_area, reg_dump_values,
+					   sizeof(reg_dump_values));
+
+	if (ret) {
+		ath10k_err(ar, "failed to read firmware dump value: %d\n", ret);
+		return;
+	}
+
+	ath10k_err(ar, "firmware register dump:\n");
+	for (i = 0; i < ARRAY_SIZE(reg_dump_values); i += 4)
+		ath10k_err(ar, "[%02d]: 0x%08X 0x%08X 0x%08X 0x%08X\n",
+			   i,
+			   reg_dump_values[i],
+			   reg_dump_values[i + 1],
+			   reg_dump_values[i + 2],
+			   reg_dump_values[i + 3]);
+
+	if (!crash_data)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(reg_dump_values); i++)
+		crash_data->registers[i] = __cpu_to_le32(reg_dump_values[i]);
+}
+
+static int ath10k_sdio_dump_memory_section(struct ath10k *ar,
+					   const struct ath10k_mem_region *mem_region,
+					   u8 *buf, size_t buf_len)
+{
+	const struct ath10k_mem_section *cur_section, *next_section;
+	unsigned int count, section_size, skip_size;
+	int ret, i, j;
+
+	if (!mem_region || !buf)
+		return 0;
+
+	cur_section = &mem_region->section_table.sections[0];
+
+	if (mem_region->start > cur_section->start) {
+		ath10k_warn(ar, "incorrect memdump region 0x%x with section start address 0x%x.\n",
+			    mem_region->start, cur_section->start);
+		return 0;
+	}
+
+	skip_size = cur_section->start - mem_region->start;
+
+	/* fill the gap between the first register section and register
+	 * start address
+	 */
+	for (i = 0; i < skip_size; i++) {
+		*buf = ATH10K_MAGIC_NOT_COPIED;
+		buf++;
+	}
+
+	count = 0;
+
+	for (i = 0; cur_section; i++) {
+		section_size = cur_section->end - cur_section->start;
+
+		if (section_size <= 0) {
+			ath10k_warn(ar, "incorrect ramdump format with start address 0x%x and stop address 0x%x\n",
+				    cur_section->start,
+				    cur_section->end);
+			break;
+		}
+
+		if ((i + 1) == mem_region->section_table.size) {
+			/* last section */
+			next_section = NULL;
+			skip_size = 0;
+		} else {
+			next_section = cur_section + 1;
+
+			if (cur_section->end > next_section->start) {
+				ath10k_warn(ar, "next ramdump section 0x%x is smaller than current end address 0x%x\n",
+					    next_section->start,
+					    cur_section->end);
+				break;
+			}
+
+			skip_size = next_section->start - cur_section->end;
+		}
+
+		if (buf_len < (skip_size + section_size)) {
+			ath10k_warn(ar, "ramdump buffer is too small: %zu\n", buf_len);
+			break;
+		}
+
+		buf_len -= skip_size + section_size;
+
+		/* read section to dest memory */
+		ret = ath10k_sdio_read_mem(ar, cur_section->start,
+					   buf, section_size);
+		if (ret) {
+			ath10k_warn(ar, "failed to read ramdump from section 0x%x: %d\n",
+				    cur_section->start, ret);
+			break;
+		}
+
+		buf += section_size;
+		count += section_size;
+
+		/* fill in the gap between this section and the next */
+		for (j = 0; j < skip_size; j++) {
+			*buf = ATH10K_MAGIC_NOT_COPIED;
+			buf++;
+		}
+
+		count += skip_size;
+
+		if (!next_section)
+			/* this was the last section */
+			break;
+
+		cur_section = next_section;
+	}
+
+	return count;
+}
+
+/* if an error happened returns < 0, otherwise the length */
+static int ath10k_sdio_dump_memory_generic(struct ath10k *ar,
+					   const struct ath10k_mem_region *current_region,
+					   u8 *buf,
+					   u32 fast_dump)
+{
+	int ret;
+
+	if (current_region->section_table.size > 0)
+		/* Copy each section individually. */
+		return ath10k_sdio_dump_memory_section(ar,
+						      current_region,
+						      buf,
+						      current_region->len);
+
+	/* No individiual memory sections defined so we can
+	 * copy the entire memory region.
+	 */
+	if (fast_dump)
+		ret = ath10k_bmi_read_memory(ar,
+					     current_region->start,
+					     buf,
+					     current_region->len);
+	else
+		ret = ath10k_sdio_read_mem(ar,
+					   current_region->start,
+					   buf,
+					   current_region->len);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to copy ramdump region %s: %d\n",
+			    current_region->name, ret);
+		return ret;
+	}
+
+	return current_region->len;
+}
+
+static void ath10k_sdio_dump_memory(struct ath10k *ar,
+				    struct ath10k_fw_crash_data *crash_data,
+				    u32 fast_dump)
+{
+	const struct ath10k_hw_mem_layout *mem_layout;
+	const struct ath10k_mem_region *current_region;
+	struct ath10k_dump_ram_data_hdr *hdr;
+	u32 count;
+	size_t buf_len;
+	int ret, i;
+	u8 *buf;
+
+	if (!crash_data)
+		return;
+
+	mem_layout = ath10k_coredump_get_mem_layout(ar);
+	if (!mem_layout)
+		return;
+
+	current_region = &mem_layout->region_table.regions[0];
+
+	buf = crash_data->ramdump_buf;
+	buf_len = crash_data->ramdump_buf_len;
+
+	memset(buf, 0, buf_len);
+
+	for (i = 0; i < mem_layout->region_table.size; i++) {
+		count = 0;
+
+		if (current_region->len > buf_len) {
+			ath10k_warn(ar, "memory region %s size %d is larger that remaining ramdump buffer size %zu\n",
+				    current_region->name,
+				    current_region->len,
+				    buf_len);
+			break;
+		}
+
+		/* Reserve space for the header. */
+		hdr = (void *)buf;
+		buf += sizeof(*hdr);
+		buf_len -= sizeof(*hdr);
+
+		ret = ath10k_sdio_dump_memory_generic(ar, current_region, buf, fast_dump);
+
+		ath10k_err(ar, "dump mem, name:%s, type:%d, start:0x%x, len:0x%x, size:%d, ret:0x%x\n",
+			   current_region->name,
+			   current_region->type,
+			   current_region->start,
+			   current_region->len,
+			   current_region->section_table.size,
+			   ret);
+
+		if (ret >= 0)
+			count = ret;
+
+		hdr->region_type = cpu_to_le32(current_region->type);
+		hdr->start = cpu_to_le32(current_region->start);
+		hdr->length = cpu_to_le32(count);
+
+		if (count == 0)
+			/* Note: the header remains, just with zero length. */
+			break;
+
+		buf += count;
+		buf_len -= count;
+
+		current_region++;
+	}
+}
+
+void ath10k_sdio_fw_crashed_dump(struct ath10k *ar)
+{
+	struct ath10k_fw_crash_data *crash_data;
+	char guid[UUID_STRING_LEN + 1];
+	u32 fast_dump = 0;
+
+	ath10k_err(ar, "begin fw dump\n");
+
+	ath10k_sdio_check_fw_reg(ar, &fast_dump);
+
+	if (fast_dump)
+		ar->bmi.done_sent = false;
+
+	ar->stats.fw_crash_counter++;
+
+	ath10k_sdio_hif_disable_intrs(ar);
+
+	crash_data = ath10k_coredump_new(ar);
+
+	if (crash_data)
+		scnprintf(guid, sizeof(guid), "%pUl", &crash_data->guid);
+	else
+		scnprintf(guid, sizeof(guid), "n/a");
+
+	ath10k_err(ar, "firmware crashed! (guid %s)\n", guid);
+	ath10k_print_driver_info(ar);
+	ath10k_sdio_dump_registers(ar, crash_data, fast_dump);
+	ath10k_sdio_dump_memory(ar, crash_data, fast_dump);
+
+	ath10k_sdio_hif_enable_intrs(ar);
+
+	queue_work(ar->workqueue, &ar->restart_work);
+}
+
 static int ath10k_sdio_probe(struct sdio_func *func,
 			     const struct sdio_device_id *id)
 {
diff --git a/drivers/net/wireless/ath/ath10k/targaddrs.h b/drivers/net/wireless/ath/ath10k/targaddrs.h
index dff6c8a..c65045a 100644
--- a/drivers/net/wireless/ath/ath10k/targaddrs.h
+++ b/drivers/net/wireless/ath/ath10k/targaddrs.h
@@ -334,6 +334,16 @@ struct host_interest {
 #define HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_FW_ACK (1 << 17)
 
 /*
+ * If both SDIO_CRASH_DUMP_ENHANCEMENT_HOST and SDIO_CRASH_DUMP_ENHANCEMENT_FW
+ * flags are set, then crashdump upload will be done using the BMI host/target
+ * communication channel.
+ */
+/* HOST to support using BMI dump FW memory when hit assert */
+#define HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_HOST 0x400
+/* FW to support using BMI dump FW memory when hit assert */
+#define HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_FW   0x800
+
+/*
  * CONSOLE FLAGS
  *
  * Bit Range  Meaning
-- 
1.9.1

Re: [PATCH v3 0/2] add fw coredump for sdio when firmware assert

[Kalle Valo]

Wen Gong <wgong@codeaurora.org> writes:

> add fw coredump for sdio when firmware assert

Please add the changelog here.

> Wen Gong (2):
>   ath10k: add bus type for each layout of coredump
> v2: change code style
> v3: split bus type to another patch, 
> remove ATH10K_BUS_ANY, 
> add bus type for each layout
>   ath10k: add fw coredump for sdio when firmware assert
> v2: change code style
> v3: add commit log for fastdump, 
> add commit log for ath10k_sdio_hif_diag_read,
> change ath10k_err to dbg log

Then you mix the changelog with patch titles like that it makes it hard
to read the summary. So instead add the changelog above, before the
summary, and leave the summary intact.

Also this didn't apply:

Applying: ath10k: add bus type for each layout of coredump
Applying: ath10k: add fw coredump for sdio when firmware assert
fatal: sha1 information is lacking or useless (drivers/net/wireless/ath/ath10k/coredump.c).
error: could not build fake ancestor
Patch failed at 0002 ath10k: add fw coredump for sdio when firmware assert

Then you submit the patch use ath.git master branch as the baseline and
do NOT have any other patches applied. Otherwise the sha1 information is
wrong and it's a lot more work for me to fix the conflicts.

So please rebase and resend.

-- 
Kalle Valo

Re: [PATCH v3 0/2] add fw coredump for sdio when firmware assert

[Wen Gong]

On 2019-09-24 13:42, Kalle Valo wrote:
patch v4 sent.
> So please rebase and resend.