From: Luciano Coelho <firstname.lastname@example.org> To: Qu Wenruo <email@example.com>, firstname.lastname@example.org, linux-wireless <email@example.com> Subject: Re: [linuxwifi] Slow performance (~30mbps) with Intel 9260 (and 8265, 3168) using 5G Date: Mon, 09 Sep 2019 09:00:12 +0300 Message-ID: <firstname.lastname@example.org> (raw) In-Reply-To: <email@example.com> Hi, On Sun, 2019-09-08 at 06:45 +0800, Qu Wenruo wrote: > Hi, > > Recent upgraded my wifi adapter from 8265 to 9260 of my ThinkPad X1C 6th > gen. > > However the initial test is producing some unacceptable results: > > Furthermore, my desktop (intel 3168), and the original 8265 of my laptop > also reproduce the same result. > Kernels are the same 5.2.11-arch1-1-ARCH across my laptop and desktop. > Tried lts (4.19) on my laptop, the same result. > Even under Windows, it's all the same. > > [ 5] local 240e:3a1:c40:6c0::278 port 43334 connected to > 240e:3a1:c40:6c0::16b port 5201 > [ ID] Interval Transfer Bitrate Retr Cwnd > [ 5] 0.00-1.00 sec 4.95 MBytes 41.5 Mbits/sec 0 219 KBytes > > [ 5] 1.00-2.00 sec 2.44 MBytes 20.5 Mbits/sec 0 248 KBytes > > [ 5] 2.00-3.00 sec 1.58 MBytes 13.3 Mbits/sec 1 1.39 KBytes > > [ 5] 3.00-4.00 sec 1.10 MBytes 9.21 Mbits/sec 44 194 KBytes > > [ 5] 4.00-5.00 sec 4.39 MBytes 36.8 Mbits/sec 0 226 KBytes > > [ 5] 5.00-6.00 sec 4.39 MBytes 36.8 Mbits/sec 0 247 KBytes > > [ 5] 6.00-7.00 sec 4.39 MBytes 36.8 Mbits/sec 0 257 KBytes > > [ 5] 7.00-8.00 sec 4.57 MBytes 38.3 Mbits/sec 0 259 KBytes > > [ 5] 8.00-9.00 sec 3.84 MBytes 32.2 Mbits/sec 0 259 KBytes > > [ 5] 9.00-10.00 sec 4.39 MBytes 36.8 Mbits/sec 0 261 KBytes > > - - - - - - - - - - - - - - - - - - - - - - - - - > [ ID] Interval Transfer Bitrate Retr > [ 5] 0.00-10.00 sec 36.0 MBytes 30.2 Mbits/sec 45 sender > [ 5] 0.00-10.02 sec 34.9 MBytes 29.2 Mbits/sec > receiver > > Yep, less than 40mbps using 5G. > While I can even feel obvious lag when using ssh, some quick keystroke > will easily cause a lag. > > I though it's the Linux support causing problem (even I'm using Arch > with 5.2 kernel) for the newer 9260 card, then I switched back to 8265. > But the same problem still exists!! > What makes things even stranger, under Windows, it's all the same result. > > To exclude the problem of the AP, my android phone can easily get over > 200mbps through the same AP. > > Furthermore, I tested my desktop which has an Intel 3168 card, and to my > surprise, it's the same result less than 40mbps. > > > Although it doesn't really hurt as both my desktop and laptop is mostly > connected through ethernet, it still doesn't make sense to me. > > Here is the dmesg of my laptop. (Please ignore the perf buffer warning, > as I also tried to trace iwlwifi:* and iwlwifi_msg:* events) > https://paste.fedoraproject.org/paste/d5TO6kvbBOwQ~tkLgDbXsQ/raw > > The iw list output: > https://paste.fedoraproject.org/paste/QKIOLyItCLcwTJoan8Wd3g/raw > > > Any ideas how this could happen to 3 different intel cards on two > different systems? (Although all running the same Arch kernel and latest > firmware) This really must be an environment issue. You are describing the same problem with different NICs (which mean different FWs are being used) and the same problem on Windows (which means different driver version being used), so it's not a new bug in either the firmware or the driver. Was it working properly before? Did it start happening only when you changed the NIC (even though you changed it back and it remained not working)? What else changed? I can't see anything hinting any issues in dmesg. Also, I'm a bit confused about the "5G" you mention. Does that mean that the AP is connected to the internet via 5G? -- Cheers, Luca.
next prev parent reply index Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-09-07 22:45 Qu Wenruo 2019-09-09 6:00 ` Luciano Coelho [this message] 2019-09-09 6:09 ` [linuxwifi] " Qu Wenruo 2019-09-09 6:18 ` Luciano Coelho
Reply instructions: You may reply publically to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Linux-Wireless Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \ email@example.com public-inbox-index linux-wireless Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless AGPL code for this site: git clone https://public-inbox.org/public-inbox.git