From: 尤晓杰 <yxj790222@163.com>
To: linux-wireless@vger.kernel.org
Subject: qca9984 fails to work
Date: Mon, 1 Nov 2021 16:21:50 +0800 (CST) [thread overview]
Message-ID: <7fc1368d.53c6.17cda9721bb.Coremail.yxj790222@163.com> (raw)
before update, everthing is ok, after update kernel, qca9984 fails to work.
dmesg|grep ath10k:
[ 4.764210] ath10k_pci 0000:07:00.0: enabling device (0000 -> 0002)
[ 4.765527] ath10k_pci 0000:07:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 4.886828] ath10k_pci 0000:07:00.0: firmware: direct-loading firmware ath10k/pre-cal-pci-0000:07:00.0.bin
[ 4.886844] ath10k_pci 0000:07:00.0: firmware: failed to load ath10k/QCA9984/hw1.0/firmware-6.bin (-2)
[ 4.888769] ath10k_pci 0000:07:00.0: firmware: direct-loading firmware ath10k/QCA9984/hw1.0/firmware-5.bin
[ 4.888774] ath10k_pci 0000:07:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 4.888777] ath10k_pci 0000:07:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 4.889124] ath10k_pci 0000:07:00.0: firmware ver 10.4-3.9.0.2-00131 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,
iram-recovery crc32 23bd9e43
[ 7.170482] ath10k_pci 0000:07:00.0: firmware: direct-loading firmware ath10k/QCA9984/hw1.0/board-2.bin
[ 7.170600] ath10k_pci 0000:07:00.0: board_file api 2 bmi_id 0:1 crc32 85498734
[ 10.810016] ath10k_pci 0000:07:00.0: failed to copy target iram contents: -12
[ 10.865295] ath10k_pci 0000:07:00.0: could not init core (-12)
[ 10.865332] ath10k_pci 0000:07:00.0: could not probe fw (-12)
kernel:
[ 0.000000] Linux version 5.14.0-3-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.3.0-11) 10.3.0, GNU ld (GNU Binutils for Debian) 2.37) #1 SMP Debian 5.14.12-1 (2021-10-14)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.14.0-3-amd64 root=UUID=6ad1bda4-9feb-4849-b1d9-4311c76e3522 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
next reply other threads:[~2021-11-01 8:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-01 8:21 尤晓杰 [this message]
2021-11-05 12:29 ` qca9984 fails to work Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7fc1368d.53c6.17cda9721bb.Coremail.yxj790222@163.com \
--to=yxj790222@163.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).