Linux-Wireless Archive on lore.kernel.org
 help / color / Atom feed
From: Christian Lamparter <chunkeey@gmail.com>
To: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org,
	Sasha Levin <sashal@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>, stable@vger.kernel.org
Subject: stable backports for "ath10k: restore QCA9880-AR1A (v1) detection"
Date: Sun, 08 Sep 2019 01:18:13 +0200
Message-ID: <8482869.vuxnZITksI@debian64> (raw)
In-Reply-To: <20190907214359.1C52A21835@mail.kernel.org>

[-- Attachment #1: Type: text/plain, Size: 1515 bytes --]

Hello,

On Saturday, September 7, 2019 11:43:58 PM CEST Sasha Levin wrote:
> This commit has been processed because it contains a "Fixes:" tag,
> fixing commit: 1a7fecb766c8 ath10k: reset chip before reading chip_id in probe.
> 
> The bot has tested the following trees: v5.2.13, v4.19.71, v4.14.142, v4.9.191, v4.4.191.
> 
> v5.2.13: Failed to apply! Possible dependencies:
>     6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")

The bot is right. Either add that patch or remove the "= {};" from the patch
that was sent to linux-wireless (based on "wireless-testing.git").

Alternatively, I've also added patches (as file attachments, I did this in
the hopes of fooling patchwork and the bots at least a bit... as well as
parking the patches for later). That said, I think this will go horribly
wrong because of this response. Since It has been a long time since I needed
a multi-version patch so I'm sorry for not being up-to-date with the latest
for-stable meta.

> v4.19.71: Failed to apply! Possible dependencies:
>     31324d17976e ("ath10k: support extended board data download for dual-band QCA9984")
>     [...] too much
> [...]: [...]
> 
> NOTE: The patch will not be queued to stable trees until it is upstream.
> 
> How should we proceed with this patch?
You could let loose your ci-bot on the attached patches and see if they would
do the trick. I'm very optimistic that this will need some more time though. 
So, "let's cross that bridge whenever we get there."

Cheers,
Christian

[-- Attachment #2: 4-9-ath10k-restore-QCA9880-AR1A-v1-detection.patch --]
[-- Type: text/x-patch, Size: 3151 bytes --]

From 38ac13d668f237941c8b77f16375f8f0e4de966a Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 25 Mar 2019 13:50:19 +0100
Subject: [PATCH 4.9] ath10k: restore QCA9880-AR1A (v1) detection
To: linux-wireless@vger.kernel.org,
    ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@codeaurora.org>

This patch restores the old behavior that read
the chip_id on the QCA988x before resetting the
chip. This needs to be done in this order since
the unsupported QCA988x AR1A chips fall off the
bus when resetted. Otherwise the next MMIO Op
after the reset causes a BUS ERROR and panic.

Cc: stable@vger.kernel.org # 4.9
Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 36 +++++++++++++++++++--------
 1 file changed, 25 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
--- a/drivers/net/wireless/ath/ath10k/pci.c	2019-09-08 00:07:21.374565470 +0200
+++ b/drivers/net/wireless/ath/ath10k/pci.c	2019-09-08 00:17:15.365912133 +0200
@@ -3172,7 +3172,7 @@ static int ath10k_pci_probe(struct pci_d
 	struct ath10k_pci *ar_pci;
 	enum ath10k_hw_rev hw_rev;
 	u32 chip_id;
-	bool pci_ps;
+	bool pci_ps, is_qca988x = false;
 	int (*pci_soft_reset)(struct ath10k *ar);
 	int (*pci_hard_reset)(struct ath10k *ar);
 	u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
@@ -3181,6 +3181,7 @@ static int ath10k_pci_probe(struct pci_d
 	case QCA988X_2_0_DEVICE_ID:
 		hw_rev = ATH10K_HW_QCA988X;
 		pci_ps = false;
+		is_qca988x = true;
 		pci_soft_reset = ath10k_pci_warm_reset;
 		pci_hard_reset = ath10k_pci_qca988x_chip_reset;
 		targ_cpu_to_ce_addr = ath10k_pci_qca988x_targ_cpu_to_ce_addr;
@@ -3300,6 +3301,19 @@ static int ath10k_pci_probe(struct pci_d
 		goto err_deinit_irq;
 	}
 
+	/* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that
+	 * fall off the bus during chip_reset. These chips have the same pci
+	 * device id as the QCA9880 BR4A or 2R4E. So that's why the check.
+	 */
+	if (is_qca988x) {
+		chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+		if (chip_id != 0xffffffff) {
+			if (!ath10k_pci_chip_is_supported(pdev->device,
+							  chip_id))
+				goto err_unsupported;
+		}
+	}
+
 	ret = ath10k_pci_chip_reset(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to reset chip: %d\n", ret);
@@ -3312,11 +3326,8 @@ static int ath10k_pci_probe(struct pci_d
 		goto err_free_irq;
 	}
 
-	if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
-		ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
-			   pdev->device, chip_id);
-		goto err_free_irq;
-	}
+	if (!ath10k_pci_chip_is_supported(pdev->device, chip_id))
+		goto err_unsupported;
 
 	ret = ath10k_core_register(ar, chip_id);
 	if (ret) {
@@ -3326,6 +3337,10 @@ static int ath10k_pci_probe(struct pci_d
 
 	return 0;
 
+err_unsupported:
+	ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+		   pdev->device, bus_params.chip_id);
+
 err_free_irq:
 	ath10k_pci_free_irq(ar);
 	ath10k_pci_rx_retry_sync(ar);

[-- Attachment #3: 4-4-ath10k-restore-QCA9880-AR1A-v1-detection.patch --]
[-- Type: text/x-patch, Size: 2884 bytes --]

From 38ac13d668f237941c8b77f16375f8f0e4de966a Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 25 Mar 2019 13:50:19 +0100
Subject: [PATCH 4.4] ath10k: restore QCA9880-AR1A (v1) detection
To: linux-wireless@vger.kernel.org,
    ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@codeaurora.org>

This patch restores the old behavior that read
the chip_id on the QCA988x before resetting the
chip. This needs to be done in this order since
the unsupported QCA988x AR1A chips fall off the
bus when resetted. Otherwise the next MMIO Op
after the reset causes a BUS ERROR and panic.

Cc: stable@vger.kernel.org # 4.4
Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 36 +++++++++++++++++++--------
 1 file changed, 25 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
--- a/drivers/net/wireless/ath/ath10k/pci.c	2019-09-08 00:07:21.374565470 +0200
+++ b/drivers/net/wireless/ath/ath10k/pci.c	2019-09-08 00:17:15.365912133 +0200
@@ -2988,12 +2988,13 @@ static int ath10k_pci_probe(struct pci_d
 	struct ath10k_pci *ar_pci;
 	enum ath10k_hw_rev hw_rev;
 	u32 chip_id;
-	bool pci_ps;
+	bool pci_ps, is_qca988x = false;
 
 	switch (pci_dev->device) {
 	case QCA988X_2_0_DEVICE_ID:
 		hw_rev = ATH10K_HW_QCA988X;
 		pci_ps = false;
+		is_qca988x = true;
 		break;
 	case QCA6164_2_1_DEVICE_ID:
 	case QCA6174_2_1_DEVICE_ID:
@@ -3087,6 +3088,19 @@ static int ath10k_pci_probe(struct pci_d
 		goto err_deinit_irq;
 	}
 
+	/* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that
+	 * fall off the bus during chip_reset. These chips have the same pci
+	 * device id as the QCA9880 BR4A or 2R4E. So that's why the check.
+	 */
+	if (is_qca988x) {
+		chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+		if (chip_id != 0xffffffff) {
+			if (!ath10k_pci_chip_is_supported(pdev->device,
+							  chip_id))
+				goto err_unsupported;
+		}
+	}
+
 	ret = ath10k_pci_chip_reset(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to reset chip: %d\n", ret);
@@ -3099,11 +3113,8 @@ static int ath10k_pci_probe(struct pci_d
 		goto err_free_irq;
 	}
 
-	if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
-		ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
-			   pdev->device, chip_id);
-		goto err_free_irq;
-	}
+	if (!ath10k_pci_chip_is_supported(pdev->device, chip_id))
+		goto err_unsupported;
 
 	ret = ath10k_core_register(ar, chip_id);
 	if (ret) {
@@ -3113,6 +3124,10 @@ static int ath10k_pci_probe(struct pci_d
 
 	return 0;
 
+err_unsupported:
+	ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+		   pdev->device, bus_params.chip_id);
+
 err_free_irq:
 	ath10k_pci_free_irq(ar);
 	ath10k_pci_kill_tasklet(ar);

[-- Attachment #4: 4-14-ath10k-restore-QCA9880-AR1A-v1-detection.patch --]
[-- Type: text/x-patch, Size: 3153 bytes --]

From 38ac13d668f237941c8b77f16375f8f0e4de966a Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 25 Mar 2019 13:50:19 +0100
Subject: [PATCH 4.14] ath10k: restore QCA9880-AR1A (v1) detection
To: linux-wireless@vger.kernel.org,
    ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@codeaurora.org>

This patch restores the old behavior that read
the chip_id on the QCA988x before resetting the
chip. This needs to be done in this order since
the unsupported QCA988x AR1A chips fall off the
bus when resetted. Otherwise the next MMIO Op
after the reset causes a BUS ERROR and panic.

Cc: stable@vger.kernel.org # 4.14
Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 36 +++++++++++++++++++--------
 1 file changed, 25 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
--- a/drivers/net/wireless/ath/ath10k/pci.c	2019-09-08 00:07:21.374565470 +0200
+++ b/drivers/net/wireless/ath/ath10k/pci.c	2019-09-08 00:17:15.365912133 +0200
@@ -3202,7 +3202,7 @@ static int ath10k_pci_probe(struct pci_d
 	struct ath10k_pci *ar_pci;
 	enum ath10k_hw_rev hw_rev;
 	u32 chip_id;
-	bool pci_ps;
+	bool pci_ps, is_qca988x = false;
 	int (*pci_soft_reset)(struct ath10k *ar);
 	int (*pci_hard_reset)(struct ath10k *ar);
 	u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
@@ -3211,6 +3211,7 @@ static int ath10k_pci_probe(struct pci_d
 	case QCA988X_2_0_DEVICE_ID:
 		hw_rev = ATH10K_HW_QCA988X;
 		pci_ps = false;
+		is_qca988x = true;
 		pci_soft_reset = ath10k_pci_warm_reset;
 		pci_hard_reset = ath10k_pci_qca988x_chip_reset;
 		targ_cpu_to_ce_addr = ath10k_pci_qca988x_targ_cpu_to_ce_addr;
@@ -3331,6 +3332,19 @@ static int ath10k_pci_probe(struct pci_d
 		goto err_deinit_irq;
 	}
 
+	/* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that
+	 * fall off the bus during chip_reset. These chips have the same pci
+	 * device id as the QCA9880 BR4A or 2R4E. So that's why the check.
+	 */
+	if (is_qca988x) {
+		chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+		if (chip_id != 0xffffffff) {
+			if (!ath10k_pci_chip_is_supported(pdev->device,
+							  chip_id))
+				goto err_unsupported;
+		}
+	}
+
 	ret = ath10k_pci_chip_reset(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to reset chip: %d\n", ret);
@@ -3343,11 +3357,8 @@ static int ath10k_pci_probe(struct pci_d
 		goto err_free_irq;
 	}
 
-	if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
-		ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
-			   pdev->device, chip_id);
-		goto err_free_irq;
-	}
+	if (!ath10k_pci_chip_is_supported(pdev->device, chip_id))
+		goto err_unsupported;
 
 	ret = ath10k_core_register(ar, chip_id);
 	if (ret) {
@@ -3357,6 +3368,10 @@ static int ath10k_pci_probe(struct pci_d
 
 	return 0;
 
+err_unsupported:
+	ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+		   pdev->device, bus_params.chip_id);
+
 err_free_irq:
 	ath10k_pci_free_irq(ar);
 	ath10k_pci_rx_retry_sync(ar);

[-- Attachment #5: 4-19-ath10k-restore-QCA9880-AR1A-v1-detection.patch --]
[-- Type: text/x-patch, Size: 3153 bytes --]

From 38ac13d668f237941c8b77f16375f8f0e4de966a Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 25 Mar 2019 13:50:19 +0100
Subject: [PATCH 4.19] ath10k: restore QCA9880-AR1A (v1) detection
To: linux-wireless@vger.kernel.org,
    ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@codeaurora.org>

This patch restores the old behavior that read
the chip_id on the QCA988x before resetting the
chip. This needs to be done in this order since
the unsupported QCA988x AR1A chips fall off the
bus when resetted. Otherwise the next MMIO Op
after the reset causes a BUS ERROR and panic.

Cc: stable@vger.kernel.org # 4.19
Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 36 +++++++++++++++++++--------
 1 file changed, 25 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
--- a/drivers/net/wireless/ath/ath10k/pci.c	2019-09-08 00:07:21.374565470 +0200
+++ b/drivers/net/wireless/ath/ath10k/pci.c	2019-09-08 00:17:15.365912133 +0200
@@ -3483,7 +3483,7 @@ static int ath10k_pci_probe(struct pci_d
 	struct ath10k_pci *ar_pci;
 	enum ath10k_hw_rev hw_rev;
 	u32 chip_id;
-	bool pci_ps;
+	bool pci_ps, is_qca988x = false;
 	int (*pci_soft_reset)(struct ath10k *ar);
 	int (*pci_hard_reset)(struct ath10k *ar);
 	u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
@@ -3493,6 +3493,7 @@ static int ath10k_pci_probe(struct pci_d
 	case QCA988X_2_0_DEVICE_ID:
 		hw_rev = ATH10K_HW_QCA988X;
 		pci_ps = false;
+		is_qca988x = true;
 		pci_soft_reset = ath10k_pci_warm_reset;
 		pci_hard_reset = ath10k_pci_qca988x_chip_reset;
 		targ_cpu_to_ce_addr = ath10k_pci_qca988x_targ_cpu_to_ce_addr;
@@ -3612,6 +3613,19 @@ static int ath10k_pci_probe(struct pci_d
 		goto err_deinit_irq;
 	}
 
+	/* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that
+	 * fall off the bus during chip_reset. These chips have the same pci
+	 * device id as the QCA9880 BR4A or 2R4E. So that's why the check.
+	 */
+	if (is_qca988x) {
+		chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+		if (chip_id != 0xffffffff) {
+			if (!ath10k_pci_chip_is_supported(pdev->device,
+							  chip_id))
+				goto err_unsupported;
+		}
+	}
+
 	ret = ath10k_pci_chip_reset(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to reset chip: %d\n", ret);
@@ -3624,11 +3638,8 @@ static int ath10k_pci_probe(struct pci_d
 		goto err_free_irq;
 	}
 
-	if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
-		ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
-			   pdev->device, chip_id);
-		goto err_free_irq;
-	}
+	if (!ath10k_pci_chip_is_supported(pdev->device, chip_id))
+		goto err_unsupported;
 
 	ret = ath10k_core_register(ar, chip_id);
 	if (ret) {
@@ -3638,6 +3649,10 @@ static int ath10k_pci_probe(struct pci_d
 
 	return 0;
 
+err_unsupported:
+	ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+		   pdev->device, bus_params.chip_id);
+
 err_free_irq:
 	ath10k_pci_free_irq(ar);
 	ath10k_pci_rx_retry_sync(ar);

[-- Attachment #6: 5-2-ath10k-restore-QCA9880-AR1A-v1-detection.patch --]
[-- Type: text/x-patch, Size: 3553 bytes --]

From 38ac13d668f237941c8b77f16375f8f0e4de966a Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 25 Mar 2019 13:50:19 +0100
Subject: [PATCH 5.2] ath10k: restore QCA9880-AR1A (v1) detection
To: linux-wireless@vger.kernel.org,
    ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@codeaurora.org>

This patch restores the old behavior that read
the chip_id on the QCA988x before resetting the
chip. This needs to be done in this order since
the unsupported QCA988x AR1A chips fall off the
bus when resetted. Otherwise the next MMIO Op
after the reset causes a BUS ERROR and panic.

Cc: stable@vger.kernel.org # 5.2
Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 36 +++++++++++++++++++--------
 1 file changed, 25 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3490,7 +3490,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	struct ath10k_pci *ar_pci;
 	enum ath10k_hw_rev hw_rev;
 	struct ath10k_bus_params bus_params;
-	bool pci_ps;
+	bool pci_ps, is_qca988x = false;
 	int (*pci_soft_reset)(struct ath10k *ar);
 	int (*pci_hard_reset)(struct ath10k *ar);
 	u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
@@ -3500,6 +3500,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	case QCA988X_2_0_DEVICE_ID:
 		hw_rev = ATH10K_HW_QCA988X;
 		pci_ps = false;
+		is_qca988x = true;
 		pci_soft_reset = ath10k_pci_warm_reset;
 		pci_hard_reset = ath10k_pci_qca988x_chip_reset;
 		targ_cpu_to_ce_addr = ath10k_pci_qca988x_targ_cpu_to_ce_addr;
@@ -3619,25 +3620,34 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		goto err_deinit_irq;
 	}
 
+	bus_params.dev_type = ATH10K_DEV_TYPE_LL;
+	bus_params.link_can_suspend = true;
+	/* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that
+	 * fall off the bus during chip_reset. These chips have the same pci
+	 * device id as the QCA9880 BR4A or 2R4E. So that's why the check.
+	 */
+	if (is_qca988x) {
+		bus_params.chip_id =
+			ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+		if (bus_params.chip_id != 0xffffffff) {
+			if (!ath10k_pci_chip_is_supported(pdev->device,
+							  bus_params.chip_id))
+				goto err_unsupported;
+		}
+	}
+
 	ret = ath10k_pci_chip_reset(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to reset chip: %d\n", ret);
 		goto err_free_irq;
 	}
 
-	bus_params.dev_type = ATH10K_DEV_TYPE_LL;
-	bus_params.link_can_suspend = true;
 	bus_params.chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
-	if (bus_params.chip_id == 0xffffffff) {
-		ath10k_err(ar, "failed to get chip id\n");
-		goto err_free_irq;
-	}
+	if (bus_params.chip_id == 0xffffffff)
+		goto err_unsupported;
 
-	if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id)) {
-		ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
-			   pdev->device, bus_params.chip_id);
+	if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id))
 		goto err_free_irq;
-	}
 
 	ret = ath10k_core_register(ar, &bus_params);
 	if (ret) {
@@ -3647,6 +3657,10 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 
 	return 0;
 
+err_unsupported:
+	ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+		   pdev->device, bus_params.chip_id);
+
 err_free_irq:
 	ath10k_pci_free_irq(ar);
 	ath10k_pci_rx_retry_sync(ar);
-- 
2.23.0


  reply index

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06 21:54 [PATCH] ath10k: restore QCA9880-AR1A (v1) detection Christian Lamparter
2019-09-07 21:43 ` Sasha Levin
2019-09-07 23:18   ` Christian Lamparter [this message]
2019-09-10  1:27   ` Tom Psyborg
2019-09-10  7:21     ` Kalle Valo
2019-09-10 12:59       ` Tom Psyborg
2019-09-08  6:32 ` Tom Psyborg
2019-09-17  6:44 ` Kalle Valo
2019-09-18 21:30   ` Tom Psyborg
     [not found] ` <20190917064412.C2E0D61572@smtp.codeaurora.org>
2019-09-20 17:19   ` Christian Lamparter
2019-10-01 13:03     ` Kalle Valo
2019-10-01 14:17       ` Tom Psyborg
2019-10-02 17:19 ` Kalle Valo

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8482869.vuxnZITksI@debian64 \
    --to=chunkeey@gmail.com \
    --cc=ath10k@lists.infradead.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org
	public-inbox-index linux-wireless

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git