linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@codeaurora.org>
To: Oliver Neukum <oneukum@suse.com>
Cc: Andrey Konovalov <andreyknvl@google.com>,
	syzbot <syzbot+74c65761783d66a9c97c@syzkaller.appspotmail.com>,
	USB list <linux-usb@vger.kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	Ulrich Kunitz <kune@deine-taler.de>,
	Daniel Drake <dsd@gentoo.org>,
	syzkaller-bugs <syzkaller-bugs@googlegroups.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	LKML <linux-kernel@vger.kernel.org>,
	linux-wireless@vger.kernel.org, netdev <netdev@vger.kernel.org>
Subject: Re: WARNING in zd_mac_clear
Date: Wed, 07 Aug 2019 17:24:16 +0300	[thread overview]
Message-ID: <87lfw5dpf3.fsf@kamboji.qca.qualcomm.com> (raw)
In-Reply-To: <1565187539.15973.6.camel@suse.com> (Oliver Neukum's message of "Wed, 07 Aug 2019 16:18:59 +0200")

Oliver Neukum <oneukum@suse.com> writes:

> Am Mittwoch, den 07.08.2019, 16:07 +0200 schrieb Andrey Konovalov:
>> On Fri, Apr 12, 2019 at 1:46 PM syzbot
>> <syzbot+74c65761783d66a9c97c@syzkaller.appspotmail.com> wrote:
>> > 
>> > Hello,
>> > 
>> > syzbot found the following crash on:
>> > 
>> > HEAD commit:    9a33b369 usb-fuzzer: main usb gadget fuzzer driver
>> > git tree:       https://github.com/google/kasan/tree/usb-fuzzer
>> > console output: https://syzkaller.appspot.com/x/log.txt?x=101a06dd200000
>> > kernel config:  https://syzkaller.appspot.com/x/.config?x=23e37f59d94ddd15
>> > dashboard link: https://syzkaller.appspot.com/bug?extid=74c65761783d66a9c97c
>> > compiler:       gcc (GCC) 9.0.0 20181231 (experimental)
>> > syz repro:      https://syzkaller.appspot.com/x/repro.syz?x=1170c22d200000
>> > C reproducer:   https://syzkaller.appspot.com/x/repro.c?x=1496adbb200000
>> > 
>> > IMPORTANT: if you fix the bug, please add the following tag to the commit:
>> > Reported-by: syzbot+74c65761783d66a9c97c@syzkaller.appspotmail.com
>> > 
>> > usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>> > usb 1-1: config 0 descriptor??
>> > usb 1-1: reset low-speed USB device number 2 using dummy_hcd
>> > usb 1-1: read over firmware interface failed: -71
>> > usb 1-1: reset low-speed USB device number 2 using dummy_hcd
>> > WARNING: CPU: 1 PID: 21 at drivers/net/wireless/zydas/zd1211rw/zd_mac.c:238
>> > zd_mac_clear+0xb0/0xe0 drivers/net/wireless/zydas/zd1211rw/zd_mac.c:238
>> > Kernel panic - not syncing: panic_on_warn set ...
>> > CPU: 1 PID: 21 Comm: kworker/1:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3
>> > Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
>> > Google 01/01/2011
>> > Workqueue: usb_hub_wq hub_event
>> > Call Trace:
>> >   __dump_stack lib/dump_stack.c:77 [inline]
>> >   dump_stack+0xe8/0x16e lib/dump_stack.c:113
>> >   panic+0x29d/0x5f2 kernel/panic.c:214
>> >   __warn.cold+0x20/0x48 kernel/panic.c:571
>> >   report_bug+0x262/0x2a0 lib/bug.c:186
>> >   fixup_bug arch/x86/kernel/traps.c:179 [inline]
>> >   fixup_bug arch/x86/kernel/traps.c:174 [inline]
>> >   do_error_trap+0x130/0x1f0 arch/x86/kernel/traps.c:272
>> >   do_invalid_op+0x37/0x40 arch/x86/kernel/traps.c:291
>> >   invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973
>> > RIP: 0010:zd_mac_clear+0xb0/0xe0
>> > drivers/net/wireless/zydas/zd1211rw/zd_mac.c:238
>> > Code: e8 85 d0 60 f8 48 8d bb f8 2b 00 00 be ff ff ff ff e8 54 5a 46 f8 31
>> > ff 89 c3 89 c6 e8 d9 d1 60 f8 85 db 75 d4 e8 60 d0 60 f8 <0f> 0b 5b 5d e9
>> > 57 d0 60 f8 48 c7 c7 58 05 cb 93 e8 fb e0 97 f8 eb
>> > RSP: 0018:ffff8880a85c7310 EFLAGS: 00010293
>> > RAX: ffff8880a84de200 RBX: 0000000000000000 RCX: ffffffff8910f507
>> > RDX: 0000000000000000 RSI: ffffffff8910f510 RDI: 0000000000000005
>> > RBP: 0000000000000001 R08: ffff8880a84de200 R09: ffffed1012f83a0b
>> > R10: ffffed1012f83a0a R11: ffff888097c1d057 R12: 00000000ffffffb9
>> > R13: ffff888097c18b20 R14: ffff888099456630 R15: ffffffff8f979398
>> >   probe+0x259/0x590 drivers/net/wireless/zydas/zd1211rw/zd_usb.c:1421
>> >   usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361
>> >   really_probe+0x2da/0xb10 drivers/base/dd.c:509
>> >   driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
>> >   __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
>> >   bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
>> >   __device_attach+0x223/0x3a0 drivers/base/dd.c:844
>> >   bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
>> >   device_add+0xad2/0x16e0 drivers/base/core.c:2106
>> >   usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021
>> >   generic_probe+0xa2/0xda drivers/usb/core/generic.c:210
>> >   usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266
>> >   really_probe+0x2da/0xb10 drivers/base/dd.c:509
>> >   driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
>> >   __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
>> >   bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
>> >   __device_attach+0x223/0x3a0 drivers/base/dd.c:844
>> >   bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
>> >   device_add+0xad2/0x16e0 drivers/base/core.c:2106
>> >   usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534
>> >   hub_port_connect drivers/usb/core/hub.c:5089 [inline]
>> >   hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
>> >   port_event drivers/usb/core/hub.c:5350 [inline]
>> >   hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432
>> >   process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
>> >   worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
>> >   kthread+0x313/0x420 kernel/kthread.c:253
>> >   ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
>> > Kernel Offset: disabled
>> > Rebooting in 86400 seconds..
>> 
>> This USB bug is the second most frequently triggered one with over 10k
>> kernel crashes.
>
> As far as I can tell this is a false positive. Didn't I submit this
> upstream?
>
> #syz test: https://github.com/google/kasan.git 9a33b369
>
> From ae999d5a437850b65497df7dcca3ffc10f75e697 Mon Sep 17 00:00:00 2001
> From: Oliver Neukum <oneukum@suse.com>
> Date: Tue, 30 Jul 2019 15:59:03 +0200
> Subject: [PATCH] zdnet: remove false assertion from zd_mac_clear()
>
> The function is called before the lock which is asserted was ever used.
> Just remove it.
>
> Reported-by: syzbot+74c65761783d66a9c97c@syzkaller.appspotmail.com
> Signed-off-by: Oliver Neukum <oneukum@suse.com>

Neither google nor patchwork[1] can find the patch. If you think the
patch should be applied, please resubmit it to linux-wireless so
patchwork sees it. Also the title prefix should be "zd1211rw:", not
"zdnet:".

[1] https://patchwork.kernel.org/project/linux-wireless/list/

-- 
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

  reply	other threads:[~2019-08-07 14:24 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-12 11:46 WARNING in zd_mac_clear syzbot
2019-08-07 14:07 ` Andrey Konovalov
2019-08-07 14:18   ` Oliver Neukum
2019-08-07 14:24     ` Kalle Valo [this message]
2019-08-07 14:58     ` syzbot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87lfw5dpf3.fsf@kamboji.qca.qualcomm.com \
    --to=kvalo@codeaurora.org \
    --cc=andreyknvl@google.com \
    --cc=davem@davemloft.net \
    --cc=dsd@gentoo.org \
    --cc=kune@deine-taler.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=oneukum@suse.com \
    --cc=stern@rowland.harvard.edu \
    --cc=syzbot+74c65761783d66a9c97c@syzkaller.appspotmail.com \
    --cc=syzkaller-bugs@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).