From: Kalle Valo <kvalo@kernel.org>
To: linux-wireless@vger.kernel.org
Cc: ath10k@lists.infradead.org, ath11k@lists.infradead.org,
ath12k@lists.infradead.org, quic_jjohnson@quicinc.com
Subject: pull-request: ath-next-20240222
Date: Thu, 22 Feb 2024 10:31:00 +0200 [thread overview]
Message-ID: <87plwolx2z.fsf@kernel.org> (raw)
Hi,
Here's an ath-next pull request to wireless-next. More info below.
Kalle
The following changes since commit 2a71528427c635f0a8bff704b2e62ce81c641d6f:
wifi: brcmfmac: fix copyright year mentioned in platform_data header (2024-01-31 18:48:06 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git tags/ath-next-20240222
for you to fetch changes up to 3ab6aff5793c3c7bdf6535d9b0024544a4abbdd5:
wifi: ath11k: remove unused scan_events from struct scan_req_params (2024-02-15 13:24:18 +0200)
----------------------------------------------------------------
ath.git patches for v6.9
We have support for QCA2066 now and also several new features in ath12k.
Major changes:
ath12k
* firmware-2.bin support
* support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
* QCN9274: support split-PHY devices
* WCN7850: enable Power Save Mode in station mode
* WCN7850: P2P support
ath11k:
* QCA6390 & WCN6855: support 2 concurrent station interfaces
* QCA2066 support
----------------------------------------------------------------
Aaradhana Sahu (1):
wifi: ath12k: fix firmware assert during insmod in memory segment mode
Baochen Qiang (5):
wifi: ath12k: enable 802.11 power save mode in station mode
wifi: ath11k: initialize rx_mcs_80 and rx_mcs_160 before use
wifi: ath11k: initialize eirp_power before use
wifi: ath11k: move pci.ops registration ahead
wifi: ath11k: add support for QCA2066
Carl Huang (2):
wifi: ath11k: support 2 station interfaces
wifi: ath11k: provide address list if chip supports 2 stations
Colin Ian King (2):
wifi: ath9k: remove redundant assignment to variable ret
wifi: carl9170: Remove redundant assignment to pointer super
Ganesh Babu Jothiram (1):
wifi: ath12k: Read board id to support split-PHY QCN9274
Harshitha Prem (1):
wifi: ath12k: add support for peer meta data version
Jeff Johnson (1):
wifi: ath11k: Really consistently use ath11k_vif_to_arvif()
Kang Yang (11):
wifi: ath12k: fix broken structure wmi_vdev_create_cmd
wifi: ath12k: fix incorrect logic of calculating vdev_stats_id
wifi: ath12k: change interface combination for P2P mode
wifi: ath12k: add P2P IE in beacon template
wifi: ath12k: implement handling of P2P NoA event
wifi: ath12k: implement remain on channel for P2P mode
wifi: ath12k: change WLAN_SCAN_PARAMS_MAX_IE_LEN from 256 to 512
wifi: ath12k: allow specific mgmt frame tx while vdev is not up
wifi: ath12k: move peer delete after vdev stop of station for WCN7850
wifi: ath12k: designating channel frequency for ROC scan
wifi: ath12k: advertise P2P dev support for WCN7850
Karthikeyan Kathirvel (1):
wifi: ath12k: subscribe required word mask from rx tlv
Karthikeyan Periyasamy (2):
wifi: ath12k: add MAC id support in WBM error path
wifi: ath12k: refactor the rfkill worker
Lingbo Kong (2):
wifi: ath12k: add processing for TWT enable event
wifi: ath12k: add processing for TWT disable event
Nathan Chancellor (1):
wifi: ath12k: Fix uninitialized use of ret in ath12k_mac_allocate()
Nicolas Escande (6):
wifi: ath11k: Do not directly use scan_flags in struct scan_req_params
wifi: ath11k: Remove scan_flags union from struct scan_req_params
wifi: ath12k: Do not use scan_flags from struct ath12k_wmi_scan_req_arg
wifi: ath12k: Remove unused scan_flags from struct ath12k_wmi_scan_req_arg
wifi: ath12k: remove the unused scan_events from ath12k_wmi_scan_req_arg
wifi: ath11k: remove unused scan_events from struct scan_req_params
P Praneesh (2):
wifi: ath12k: Add logic to write QRTR node id to scratch
wifi: ath12k: fix PCI read and write
Raj Kumar Bhagat (5):
wifi: ath12k: add firmware-2.bin support
wifi: ath12k: fix fetching MCBC flag for QCN9274
wifi: ath12k: split hal_ops to support RX TLVs word mask compaction
wifi: ath12k: remove hal_desc_sz from hw params
wifi: ath12k: disable QMI PHY capability learn in split-phy QCN9274
Sowmiya Sree Elavalagan (1):
wifi: ath12k: fetch correct pdev id from WMI_SERVICE_READY_EXT_EVENTID
Sriram R (1):
wifi: ath12k: indicate NON MBSSID vdev by default during vdev start
Toke Høiland-Jørgensen (1):
wifi: ath9k: delay all of ath9k_wmi_event_tasklet() until init is complete
Wen Gong (1):
wifi: ath11k: change to move WMI_VDEV_PARAM_SET_HEMU_MODE before WMI_PEER_ASSOC_CMDID
drivers/net/wireless/ath/ath11k/core.c | 100 +++++-
drivers/net/wireless/ath/ath11k/core.h | 1 +
drivers/net/wireless/ath/ath11k/hw.c | 2 +-
drivers/net/wireless/ath/ath11k/hw.h | 1 +
drivers/net/wireless/ath/ath11k/mac.c | 116 +++++--
drivers/net/wireless/ath/ath11k/mhi.c | 1 +
drivers/net/wireless/ath/ath11k/pci.c | 43 ++-
drivers/net/wireless/ath/ath11k/pcic.c | 11 +
drivers/net/wireless/ath/ath11k/wmi.c | 2 +-
drivers/net/wireless/ath/ath11k/wmi.h | 86 +++--
drivers/net/wireless/ath/ath12k/Makefile | 4 +-
drivers/net/wireless/ath/ath12k/core.c | 55 +++-
drivers/net/wireless/ath/ath12k/core.h | 27 ++
drivers/net/wireless/ath/ath12k/dp.c | 25 +-
drivers/net/wireless/ath/ath12k/dp.h | 17 +-
drivers/net/wireless/ath/ath12k/dp_mon.c | 5 +-
drivers/net/wireless/ath/ath12k/dp_rx.c | 158 ++++-----
drivers/net/wireless/ath/ath12k/dp_tx.c | 20 ++
drivers/net/wireless/ath/ath12k/fw.c | 171 ++++++++++
drivers/net/wireless/ath/ath12k/fw.h | 33 ++
drivers/net/wireless/ath/ath12k/hal.c | 415 +++++++++++++++++++++++-
drivers/net/wireless/ath/ath12k/hal.h | 20 +-
drivers/net/wireless/ath/ath12k/hw.c | 24 +-
drivers/net/wireless/ath/ath12k/hw.h | 32 +-
drivers/net/wireless/ath/ath12k/mac.c | 443 ++++++++++++++++++++++----
drivers/net/wireless/ath/ath12k/mhi.c | 52 ++-
drivers/net/wireless/ath/ath12k/p2p.c | 142 +++++++++
drivers/net/wireless/ath/ath12k/p2p.h | 23 ++
drivers/net/wireless/ath/ath12k/pci.c | 84 +++--
drivers/net/wireless/ath/ath12k/pci.h | 6 +-
drivers/net/wireless/ath/ath12k/qmi.c | 52 ++-
drivers/net/wireless/ath/ath12k/qmi.h | 1 -
drivers/net/wireless/ath/ath12k/rx_desc.h | 116 ++++++-
drivers/net/wireless/ath/ath12k/wmi.c | 230 +++++++++++--
drivers/net/wireless/ath/ath12k/wmi.h | 202 ++++++++----
drivers/net/wireless/ath/ath9k/htc.h | 2 +-
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 4 +
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 4 -
drivers/net/wireless/ath/ath9k/wmi.c | 10 +-
drivers/net/wireless/ath/ath9k/xmit.c | 3 +-
drivers/net/wireless/ath/carl9170/tx.c | 2 +-
41 files changed, 2334 insertions(+), 411 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath12k/fw.c
create mode 100644 drivers/net/wireless/ath/ath12k/fw.h
create mode 100644 drivers/net/wireless/ath/ath12k/p2p.c
create mode 100644 drivers/net/wireless/ath/ath12k/p2p.h
next reply other threads:[~2024-02-22 8:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-22 8:31 Kalle Valo [this message]
2024-02-22 10:43 ` pull-request: ath-next-20240222 Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87plwolx2z.fsf@kernel.org \
--to=kvalo@kernel.org \
--cc=ath10k@lists.infradead.org \
--cc=ath11k@lists.infradead.org \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_jjohnson@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).