[PATCH v4 20/25] mt76: mt7615: introduce uni cmd command types

[Lorenzo Bianconi <lorenzo@kernel.org>]

Introduce mcu uni command type. Uni commands rely on a stripped verions
of mt7615_mcu_txd data strutture. Split mt7615_mcu_txd_common and
mt7615_mcu_txd. Uni commands will be use by mt7663e driver

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7615/mcu.c   | 27 ++++++---
 .../net/wireless/mediatek/mt76/mt7615/mcu.h   | 60 ++++++++++++++++++-
 2 files changed, 79 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index e73cd3cb014a..372ffc6322c9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -52,7 +52,8 @@ struct mt7615_fw_trailer {
 void mt7615_mcu_fill_msg(struct mt7615_dev *dev, struct sk_buff *skb,
 			 int cmd, int *wait_seq)
 {
-	int mcu_cmd = cmd & MCU_CMD_MASK;
+	int txd_len, mcu_cmd = cmd & MCU_CMD_MASK;
+	struct mt7615_uni_txd *uni_txd;
 	struct mt7615_mcu_txd *mcu_txd;
 	u8 seq, q_idx, pkt_fmt;
 	__le32 *txd;
@@ -61,8 +62,11 @@ void mt7615_mcu_fill_msg(struct mt7615_dev *dev, struct sk_buff *skb,
 	seq = ++dev->mt76.mcu.msg_seq & 0xf;
 	if (!seq)
 		seq = ++dev->mt76.mcu.msg_seq & 0xf;
+	if (wait_seq)
+		*wait_seq = seq;
 
-	mcu_txd = (struct mt7615_mcu_txd *)skb_push(skb, sizeof(*mcu_txd));
+	txd_len = cmd & MCU_UNI_PREFIX ? sizeof(*uni_txd) : sizeof(*mcu_txd);
+	txd = (__le32 *)skb_push(skb, txd_len);
 
 	if (cmd != MCU_CMD_FW_SCATTER) {
 		q_idx = MT_TX_MCU_PORT_RX_Q0;
@@ -71,7 +75,6 @@ void mt7615_mcu_fill_msg(struct mt7615_dev *dev, struct sk_buff *skb,
 		q_idx = MT_TX_MCU_PORT_RX_FWDL;
 		pkt_fmt = MT_TX_TYPE_FW;
 	}
-	txd = mcu_txd->txd;
 
 	val = FIELD_PREP(MT_TXD0_TX_BYTES, skb->len) |
 	      FIELD_PREP(MT_TXD0_P_IDX, MT_TX_PORT_IDX_MCU) |
@@ -83,8 +86,22 @@ void mt7615_mcu_fill_msg(struct mt7615_dev *dev, struct sk_buff *skb,
 	      FIELD_PREP(MT_TXD1_PKT_FMT, pkt_fmt);
 	txd[1] = cpu_to_le32(val);
 
+	if (cmd & MCU_UNI_PREFIX) {
+		uni_txd = (struct mt7615_uni_txd *)txd;
+		uni_txd->len = cpu_to_le16(skb->len - sizeof(uni_txd->txd));
+		uni_txd->option = MCU_CMD_UNI_EXT_ACK;
+		uni_txd->s2d_index = MCU_S2D_H2N;
+		uni_txd->pkt_type = MCU_PKT_ID;
+		uni_txd->cid = mcu_cmd;
+		uni_txd->seq = seq;
+
+		return;
+	}
+
+	mcu_txd = (struct mt7615_mcu_txd *)txd;
 	mcu_txd->len = cpu_to_le16(skb->len - sizeof(mcu_txd->txd));
 	mcu_txd->pq_id = cpu_to_le16(MCU_PQ_ID(MT_TX_PORT_IDX_MCU, q_idx));
+	mcu_txd->s2d_index = MCU_S2D_H2N;
 	mcu_txd->pkt_type = MCU_PKT_ID;
 	mcu_txd->seq = seq;
 
@@ -97,10 +114,6 @@ void mt7615_mcu_fill_msg(struct mt7615_dev *dev, struct sk_buff *skb,
 		mcu_txd->ext_cid = cmd;
 		mcu_txd->ext_cid_ack = 1;
 	}
-	mcu_txd->s2d_index = MCU_S2D_H2N;
-
-	if (wait_seq)
-		*wait_seq = seq;
 }
 
 static int __mt7615_mcu_msg_send(struct mt7615_dev *dev, struct sk_buff *skb,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
index 8ae08a2bf10d..3aad460e0809 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
@@ -23,6 +23,57 @@ struct mt7615_mcu_txd {
 	u32 reserved[5];
 } __packed __aligned(4);
 
+/**
+ * struct mt7615_uni_txd - mcu command descriptor for firmware v3
+ * @txd: hardware descriptor
+ * @len: total length not including txd
+ * @cid: command identifier
+ * @pkt_type: must be 0xa0 (cmd packet by long format)
+ * @frag_n: fragment number
+ * @seq: sequence number
+ * @checksum: 0 mean there is no checksum
+ * @s2d_index: index for command source and destination
+ *  Definition              | value | note
+ *  CMD_S2D_IDX_H2N         | 0x00  | command from HOST to WM
+ *  CMD_S2D_IDX_C2N         | 0x01  | command from WA to WM
+ *  CMD_S2D_IDX_H2C         | 0x02  | command from HOST to WA
+ *  CMD_S2D_IDX_H2N_AND_H2C | 0x03  | command from HOST to WA and WM
+ *
+ * @option: command option
+ *  BIT[0]: UNI_CMD_OPT_BIT_ACK
+ *          set to 1 to request a fw reply
+ *          if UNI_CMD_OPT_BIT_0_ACK is set and UNI_CMD_OPT_BIT_2_SET_QUERY
+ *          is set, mcu firmware will send response event EID = 0x01
+ *          (UNI_EVENT_ID_CMD_RESULT) to the host.
+ *  BIT[1]: UNI_CMD_OPT_BIT_UNI_CMD
+ *          0: original command
+ *          1: unified command
+ *  BIT[2]: UNI_CMD_OPT_BIT_SET_QUERY
+ *          0: QUERY command
+ *          1: SET command
+ */
+struct mt7615_uni_txd {
+	__le32 txd[8];
+
+	/* DW1 */
+	__le16 len;
+	__le16 cid;
+
+	/* DW2 */
+	u8 reserved;
+	u8 pkt_type;
+	u8 frag_n;
+	u8 seq;
+
+	/* DW3 */
+	__le16 checksum;
+	u8 s2d_index;
+	u8 option;
+
+	/* DW4 */
+	u8 reserved2[4];
+} __packed __aligned(4);
+
 /* event table */
 enum {
 	MCU_EVENT_TARGET_ADDRESS_LEN = 0x01,
@@ -180,7 +231,8 @@ enum {
 };
 
 #define MCU_FW_PREFIX		BIT(31)
-#define MCU_CMD_MASK		~MCU_FW_PREFIX
+#define MCU_UNI_PREFIX		BIT(30)
+#define MCU_CMD_MASK		~(MCU_FW_PREFIX | MCU_UNI_PREFIX)
 
 enum {
 	MCU_CMD_TARGET_ADDRESS_LEN_REQ = MCU_FW_PREFIX | 0x01,
@@ -217,6 +269,12 @@ enum {
 	MCU_EXT_CMD_SET_RDD_PATTERN = 0x7d,
 };
 
+#define MCU_CMD_ACK		BIT(0)
+#define MCU_CMD_UNI		BIT(1)
+#define MCU_CMD_QUERY		BIT(2)
+
+#define MCU_CMD_UNI_EXT_ACK	(MCU_CMD_ACK | MCU_CMD_UNI | MCU_CMD_QUERY)
+
 enum {
 	PATCH_SEM_RELEASE = 0x0,
 	PATCH_SEM_GET	  = 0x1
-- 
2.25.1