From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from devils.ext.ti.com ([198.47.26.153]:33984 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751075Ab0GKFiv convert rfc822-to-8bit (ORCPT ); Sun, 11 Jul 2010 01:38:51 -0400 From: "Levi, Shahar" To: Logan Gunthorpe , Luciano Coelho CC: "linux-wireless@vger.kernel.org" Date: Sun, 11 Jul 2010 07:38:33 +0200 Subject: RE: wl1271 firmware Message-ID: References: 1278578525.8576.19.camel@chilepepper <4C37BCA0.5090607@deltatee.com> In-Reply-To: <4C37BCA0.5090607@deltatee.com> Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: > -----Original Message----- > From: linux-wireless-owner@vger.kernel.org [mailto:linux-wireless- > owner@vger.kernel.org] On Behalf Of Logan Gunthorpe > Sent: Saturday, July 10, 2010 3:20 AM > To: Luciano Coelho > Cc: linux-wireless@vger.kernel.org > Subject: RE: wl1271 firmware > > Hi Everyone, > > I too am working with a WL1271 module and have just today got it > connected to an Atmel ARM9 development kit (AT91SAM9G45-EKES). So far it > appears to work but I have been gated by the firmware and NVS file issues. > > I have a firmware binary, but it seems to be a newer version > (6.1.3.01.5) than what you are using. Does anyone have any idea if this > version will work? It seems to be the only one available on TI's > website. Additionally, our device manufacturer has been hesitant to > provide any support because we are on an unsupported platform and opted > to use the open source driver. Are there any other ways to obtain an > older version of the firmware? > > The NVS file is another problem. TI's website has instructions to use a > cryptic tool that appears to come with their driver package. There is no > source for this tool and for obvious reasons would not work for us. > > Anyway, I'd like to help in anyway I can. I've taken a look at the > twilan.ini file and I see the commonality with wl1271_ini.h. It would be > relatively easy to write a tool that parses the INI file and generates > the common part of the NVS file. However, I'd have no idea how to > generate the device specific calibration or the few fields missing from > the INI file. > > Thanks, > > Logan > Hi Logan, I am pushing to get access to the correct FW and NVS files version in TI web. I believe the community wills nave access of those files this week. Regarding the tool to generate the NVS file in the correct format, I will check that and reply. Regards, Shahar