* [GIT PULL] Add NVRAM files for bcm43455 and bcm43430
@ 2019-01-11 12:11 Matthias Brugger
2019-01-14 15:33 ` Josh Boyer
0 siblings, 1 reply; 4+ messages in thread
From: Matthias Brugger @ 2019-01-11 12:11 UTC (permalink / raw)
To: linux-firmware; +Cc: linux-wireless, serge, phil, arend
Hi Josh,
Hi all,
This pull request add firmware files neede by bcm43430 for Raspberry Pi 3 Model
B and bcm43455 for Raspberry Pi 3 Model B+.
Please have a look and, if convenient, pull :)
Best regards,
Matthias
---
The following changes since commit 0f22c8527439eaaf5c3fcf87b31c89445b6fa84d:
Revert "amdgpu: update vega10 fw for 18.50 release" (2018-12-18 15:38:53 -0500)
are available in the Git repository at:
ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git/
tags/add-rpi-fw
for you to fetch changes up to 930f276f8f1f2d83e44da6a32f4e0b2513db21a2:
brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B (2019-01-11 13:04:43
+0100)
----------------------------------------------------------------
- Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
- Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
----------------------------------------------------------------
Matthias Brugger (2):
brcm: Add BCM43455 NVRAM for Raspberry Pi 3 B+
brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B
WHENCE | 3 +
brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt | 47 ++++++++++++++++
brcm/brcmfmac43455-sdio.clm_blob | Bin 0 -> 14036 bytes
brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt | 82 ++++++++++++++++++++++++++++
4 files changed, 132 insertions(+)
create mode 100644 brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt
create mode 100644 brcm/brcmfmac43455-sdio.clm_blob
create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] Add NVRAM files for bcm43455 and bcm43430
2019-01-11 12:11 [GIT PULL] Add NVRAM files for bcm43455 and bcm43430 Matthias Brugger
@ 2019-01-14 15:33 ` Josh Boyer
2019-01-14 17:32 ` Josh Boyer
0 siblings, 1 reply; 4+ messages in thread
From: Josh Boyer @ 2019-01-14 15:33 UTC (permalink / raw)
To: Matthias Brugger
Cc: Linux Firmware, linux-wireless, serge, phil, Arend van Spriel
On Fri, Jan 11, 2019 at 7:11 AM Matthias Brugger <mbrugger@suse.com> wrote:
>
> Hi Josh,
> Hi all,
>
> This pull request add firmware files neede by bcm43430 for Raspberry Pi 3 Model
> B and bcm43455 for Raspberry Pi 3 Model B+.
>
> Please have a look and, if convenient, pull :)
>
> Best regards,
> Matthias
>
> ---
> The following changes since commit 0f22c8527439eaaf5c3fcf87b31c89445b6fa84d:
>
> Revert "amdgpu: update vega10 fw for 18.50 release" (2018-12-18 15:38:53 -0500)
>
> are available in the Git repository at:
>
>
> ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git/
> tags/add-rpi-fw
>
> for you to fetch changes up to 930f276f8f1f2d83e44da6a32f4e0b2513db21a2:
>
> brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B (2019-01-11 13:04:43
> +0100)
>
> ----------------------------------------------------------------
> - Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
> - Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
>
> ----------------------------------------------------------------
> Matthias Brugger (2):
> brcm: Add BCM43455 NVRAM for Raspberry Pi 3 B+
> brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B
>
> WHENCE | 3 +
> brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt | 47 ++++++++++++++++
> brcm/brcmfmac43455-sdio.clm_blob | Bin 0 -> 14036 bytes
> brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt | 82 ++++++++++++++++++++++++++++
> 4 files changed, 132 insertions(+)
> create mode 100644 brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt
> create mode 100644 brcm/brcmfmac43455-sdio.clm_blob
> create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt
Pulled and pushed out.
josh
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] Add NVRAM files for bcm43455 and bcm43430
2019-01-14 15:33 ` Josh Boyer
@ 2019-01-14 17:32 ` Josh Boyer
2019-01-14 17:54 ` Matthias Brugger
0 siblings, 1 reply; 4+ messages in thread
From: Josh Boyer @ 2019-01-14 17:32 UTC (permalink / raw)
To: Matthias Brugger
Cc: Linux Firmware, linux-wireless, serge, Phil Elwell, Arend van Spriel
On Mon, Jan 14, 2019 at 10:33 AM Josh Boyer <jwboyer@kernel.org> wrote:
>
> On Fri, Jan 11, 2019 at 7:11 AM Matthias Brugger <mbrugger@suse.com> wrote:
> >
> > Hi Josh,
> > Hi all,
> >
> > This pull request add firmware files neede by bcm43430 for Raspberry Pi 3 Model
> > B and bcm43455 for Raspberry Pi 3 Model B+.
> >
> > Please have a look and, if convenient, pull :)
> >
> > Best regards,
> > Matthias
> >
> > ---
> > The following changes since commit 0f22c8527439eaaf5c3fcf87b31c89445b6fa84d:
> >
> > Revert "amdgpu: update vega10 fw for 18.50 release" (2018-12-18 15:38:53 -0500)
> >
> > are available in the Git repository at:
> >
> >
> > ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git/
> > tags/add-rpi-fw
> >
> > for you to fetch changes up to 930f276f8f1f2d83e44da6a32f4e0b2513db21a2:
> >
> > brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B (2019-01-11 13:04:43
> > +0100)
> >
> > ----------------------------------------------------------------
> > - Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
> > - Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
> >
> > ----------------------------------------------------------------
> > Matthias Brugger (2):
> > brcm: Add BCM43455 NVRAM for Raspberry Pi 3 B+
> > brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B
> >
> > WHENCE | 3 +
> > brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt | 47 ++++++++++++++++
> > brcm/brcmfmac43455-sdio.clm_blob | Bin 0 -> 14036 bytes
> > brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt | 82 ++++++++++++++++++++++++++++
> > 4 files changed, 132 insertions(+)
> > create mode 100644 brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt
> > create mode 100644 brcm/brcmfmac43455-sdio.clm_blob
> > create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt
>
> Pulled and pushed out.
I reverted commit fca5958287a3e5e0bd1676af0ca4fc2fb9704b42 as there is
some question around the clm_blob file an license applicability. If
that gets resolved, please submit a new patch to add those files.
josh
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] Add NVRAM files for bcm43455 and bcm43430
2019-01-14 17:32 ` Josh Boyer
@ 2019-01-14 17:54 ` Matthias Brugger
0 siblings, 0 replies; 4+ messages in thread
From: Matthias Brugger @ 2019-01-14 17:54 UTC (permalink / raw)
To: Josh Boyer
Cc: Linux Firmware, linux-wireless, serge, Phil Elwell, Arend van Spriel
Hi Josh,
On 14/01/2019 18:32, Josh Boyer wrote:
> On Mon, Jan 14, 2019 at 10:33 AM Josh Boyer <jwboyer@kernel.org> wrote:
>>
>> On Fri, Jan 11, 2019 at 7:11 AM Matthias Brugger <mbrugger@suse.com> wrote:
>>>
>>> Hi Josh,
>>> Hi all,
>>>
>>> This pull request add firmware files neede by bcm43430 for Raspberry Pi 3 Model
>>> B and bcm43455 for Raspberry Pi 3 Model B+.
>>>
>>> Please have a look and, if convenient, pull :)
>>>
>>> Best regards,
>>> Matthias
>>>
>>> ---
>>> The following changes since commit 0f22c8527439eaaf5c3fcf87b31c89445b6fa84d:
>>>
>>> Revert "amdgpu: update vega10 fw for 18.50 release" (2018-12-18 15:38:53 -0500)
>>>
>>> are available in the Git repository at:
>>>
>>>
>>> ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git/
>>> tags/add-rpi-fw
>>>
>>> for you to fetch changes up to 930f276f8f1f2d83e44da6a32f4e0b2513db21a2:
>>>
>>> brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B (2019-01-11 13:04:43
>>> +0100)
>>>
>>> ----------------------------------------------------------------
>>> - Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
>>> - Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
>>>
>>> ----------------------------------------------------------------
>>> Matthias Brugger (2):
>>> brcm: Add BCM43455 NVRAM for Raspberry Pi 3 B+
>>> brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B
>>>
>>> WHENCE | 3 +
>>> brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt | 47 ++++++++++++++++
>>> brcm/brcmfmac43455-sdio.clm_blob | Bin 0 -> 14036 bytes
>>> brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt | 82 ++++++++++++++++++++++++++++
>>> 4 files changed, 132 insertions(+)
>>> create mode 100644 brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt
>>> create mode 100644 brcm/brcmfmac43455-sdio.clm_blob
>>> create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt
>>
>> Pulled and pushed out.
>
> I reverted commit fca5958287a3e5e0bd1676af0ca4fc2fb9704b42 as there is
> some question around the clm_blob file an license applicability. If
> that gets resolved, please submit a new patch to add those files.
>
Thanks, actually I realized that there are some more problems with this pull
request, so thank you for reverting. I'll send a new one soon.
Regards,
Matthias
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-01-14 17:54 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-11 12:11 [GIT PULL] Add NVRAM files for bcm43455 and bcm43430 Matthias Brugger
2019-01-14 15:33 ` Josh Boyer
2019-01-14 17:32 ` Josh Boyer
2019-01-14 17:54 ` Matthias Brugger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).