Linux-Wireless Archive on lore.kernel.org
 help / Atom feed
* [PATCH v2] mwifiex: add support for sd8977 chipset
@ 2019-01-09 14:46 Ganapathi Bhat
  2019-01-10  7:40 ` Kalle Valo
  0 siblings, 1 reply; 3+ messages in thread
From: Ganapathi Bhat @ 2019-01-09 14:46 UTC (permalink / raw)
  To: linux-wireless
  Cc: Cathy Luo, Zhiyuan Yang, James Cao, Rakesh Parmar, Hemantkumar Suthar

From a0f96e630eb5b74b047149e23c161a9f06fb2cc5 Mon Sep 17 00:00:00 2001
From: Hemantkumar Suthar <shemant@marvell.com>

This patch adds support for 8977 chipset to mwifiex with SDIO
interface. Register offsets and supported feature flags are
updated. Firmware image used will be mrvl/sd8977_uapsta.bin.

Signed-off-by: Hemantkumar Suthar <shemant@marvell.com>
Signed-off-by: Rakesh Parmar <rakeshp@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
---
 drivers/net/wireless/marvell/mwifiex/Kconfig |  2 +-
 drivers/net/wireless/marvell/mwifiex/sdio.c  |  5 ++
 drivers/net/wireless/marvell/mwifiex/sdio.h  | 70 ++++++++++++++++++++++++++++
 3 files changed, 76 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/Kconfig b/drivers/net/wireless/marvell/mwifiex/Kconfig
index 279167d..524fd56 100644
--- a/drivers/net/wireless/marvell/mwifiex/Kconfig
+++ b/drivers/net/wireless/marvell/mwifiex/Kconfig
@@ -9,7 +9,7 @@ config MWIFIEX
 	  mwifiex.
 
 config MWIFIEX_SDIO
-	tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8997"
+	tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8977/SD8997"
 	depends on MWIFIEX && MMC
 	select FW_LOADER
 	select WANT_DEV_COREDUMP
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index d49fbd5..a856483 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -489,6 +489,8 @@ static void mwifiex_sdio_coredump(struct device *dev)
 #define SDIO_DEVICE_ID_MARVELL_8887   (0x9135)
 /* Device ID for SD8801 */
 #define SDIO_DEVICE_ID_MARVELL_8801   (0x9139)
+/* Device ID for SD8977 */
+#define SDIO_DEVICE_ID_MARVELL_8977   (0x9145)
 /* Device ID for SD8997 */
 #define SDIO_DEVICE_ID_MARVELL_8997   (0x9141)
 
@@ -507,6 +509,8 @@ static void mwifiex_sdio_coredump(struct device *dev)
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8887},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8801),
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8801},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8977),
+		.driver_data = (unsigned long)&mwifiex_sdio_sd8977},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8997),
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8997},
 	{},
@@ -2726,4 +2730,5 @@ static void mwifiex_sdio_up_dev(struct mwifiex_adapter *adapter)
 MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8887_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(SD8977_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8997_DEFAULT_FW_NAME);
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.h b/drivers/net/wireless/marvell/mwifiex/sdio.h
index dccf7fd..912de2c 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.h
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.h
@@ -36,6 +36,7 @@
 #define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin"
 #define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin"
 #define SD8801_DEFAULT_FW_NAME "mrvl/sd8801_uapsta.bin"
+#define SD8977_DEFAULT_FW_NAME "mrvl/sd8977_uapsta.bin"
 #define SD8997_DEFAULT_FW_NAME "mrvl/sd8997_uapsta.bin"
 
 #define BLOCK_MODE	1
@@ -371,6 +372,59 @@ struct mwifiex_sdio_device {
 				 0x59, 0x5c, 0x5d},
 };
 
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8977 = {
+	.start_rd_port = 0,
+	.start_wr_port = 0,
+	.base_0_reg = 0xF8,
+	.base_1_reg = 0xF9,
+	.poll_reg = 0x5C,
+	.host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+		CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+	.host_int_rsr_reg = 0x4,
+	.host_int_status_reg = 0x0C,
+	.host_int_mask_reg = 0x08,
+	.status_reg_0 = 0xE8,
+	.status_reg_1 = 0xE9,
+	.sdio_int_mask = 0xff,
+	.data_port_mask = 0xffffffff,
+	.io_port_0_reg = 0xE4,
+	.io_port_1_reg = 0xE5,
+	.io_port_2_reg = 0xE6,
+	.max_mp_regs = 196,
+	.rd_bitmap_l = 0x10,
+	.rd_bitmap_u = 0x11,
+	.rd_bitmap_1l = 0x12,
+	.rd_bitmap_1u = 0x13,
+	.wr_bitmap_l = 0x14,
+	.wr_bitmap_u = 0x15,
+	.wr_bitmap_1l = 0x16,
+	.wr_bitmap_1u = 0x17,
+	.rd_len_p0_l = 0x18,
+	.rd_len_p0_u = 0x19,
+	.card_misc_cfg_reg = 0xd8,
+	.card_cfg_2_1_reg = 0xd9,
+	.cmd_rd_len_0 = 0xc0,
+	.cmd_rd_len_1 = 0xc1,
+	.cmd_rd_len_2 = 0xc2,
+	.cmd_rd_len_3 = 0xc3,
+	.cmd_cfg_0 = 0xc4,
+	.cmd_cfg_1 = 0xc5,
+	.cmd_cfg_2 = 0xc6,
+	.cmd_cfg_3 = 0xc7,
+	.fw_dump_host_ready = 0xcc,
+	.fw_dump_ctrl = 0xf0,
+	.fw_dump_start = 0xf1,
+	.fw_dump_end = 0xf8,
+	.func1_dump_reg_start = 0x10,
+	.func1_dump_reg_end = 0x17,
+	.func1_scratch_reg = 0xe8,
+	.func1_spec_reg_num = 13,
+	.func1_spec_reg_table = {0x08, 0x58, 0x5C, 0x5D,
+				 0x60, 0x61, 0x62, 0x64,
+				 0x65, 0x66, 0x68, 0x69,
+				 0x6a},
+};
+
 static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8997 = {
 	.start_rd_port = 0,
 	.start_wr_port = 0,
@@ -532,6 +586,22 @@ struct mwifiex_sdio_device {
 	.can_ext_scan = true,
 };
 
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8977 = {
+	.firmware = SD8977_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd8977,
+	.max_ports = 32,
+	.mp_agg_pkt_limit = 16,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
+	.mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+	.supports_sdio_new_mode = true,
+	.has_control_mask = false,
+	.can_dump_fw = true,
+	.fw_dump_enh = true,
+	.can_auto_tdls = false,
+	.can_ext_scan = true,
+};
+
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8997 = {
 	.firmware = SD8997_DEFAULT_FW_NAME,
 	.reg = &mwifiex_reg_sd8997,
-- 
1.9.1

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] mwifiex: add support for sd8977 chipset
  2019-01-09 14:46 [PATCH v2] mwifiex: add support for sd8977 chipset Ganapathi Bhat
@ 2019-01-10  7:40 ` Kalle Valo
  2019-01-10  8:46   ` Ganapathi Bhat
  0 siblings, 1 reply; 3+ messages in thread
From: Kalle Valo @ 2019-01-10  7:40 UTC (permalink / raw)
  To: Ganapathi Bhat
  Cc: linux-wireless\,
	Cathy Luo, Zhiyuan Yang, James Cao, Rakesh Parmar,
	Hemantkumar Suthar

Ganapathi Bhat <gbhat@marvell.com> writes:

>>From a0f96e630eb5b74b047149e23c161a9f06fb2cc5 Mon Sep 17 00:00:00 2001
> From: Hemantkumar Suthar <shemant@marvell.com>
>
> This patch adds support for 8977 chipset to mwifiex with SDIO
> interface. Register offsets and supported feature flags are
> updated. Firmware image used will be mrvl/sd8977_uapsta.bin.
>
> Signed-off-by: Hemantkumar Suthar <shemant@marvell.com>
> Signed-off-by: Rakesh Parmar <rakeshp@marvell.com>
> Signed-off-by: Cathy Luo <cluo@marvell.com>
> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

I'm not sure if git automatically removes '>From ' (never seen it
before) so I'll remove it manually if needed.

-- 
Kalle Valo

^ permalink raw reply	[flat|nested] 3+ messages in thread

* RE: [PATCH v2] mwifiex: add support for sd8977 chipset
  2019-01-10  7:40 ` Kalle Valo
@ 2019-01-10  8:46   ` Ganapathi Bhat
  0 siblings, 0 replies; 3+ messages in thread
From: Ganapathi Bhat @ 2019-01-10  8:46 UTC (permalink / raw)
  To: Kalle Valo
  Cc: linux-wireless, Cathy Luo, Zhiyuan Yang, James Cao,
	Rakesh Parmar, Hemantkumar Suthar

Hi Kalle,

> Subject: Re: [PATCH v2] mwifiex: add support for sd8977 chipset
> 
> Ganapathi Bhat <gbhat@marvell.com> writes:
> 
> >>From a0f96e630eb5b74b047149e23c161a9f06fb2cc5 Mon Sep 17 00:00:00
> 2001
> > From: Hemantkumar Suthar <shemant@marvell.com>
> >
> > This patch adds support for 8977 chipset to mwifiex with SDIO
> > interface. Register offsets and supported feature flags are updated.
> > Firmware image used will be mrvl/sd8977_uapsta.bin.
> >
> > Signed-off-by: Hemantkumar Suthar <shemant@marvell.com>
> > Signed-off-by: Rakesh Parmar <rakeshp@marvell.com>
> > Signed-off-by: Cathy Luo <cluo@marvell.com>
> > Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
> 
> I'm not sure if git automatically removes '>From ' (never seen it
> before) so I'll remove it manually if needed.

I have sent v3, removing 'From a0f9...'

Regards,
Ganapathi

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-09 14:46 [PATCH v2] mwifiex: add support for sd8977 chipset Ganapathi Bhat
2019-01-10  7:40 ` Kalle Valo
2019-01-10  8:46   ` Ganapathi Bhat

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org linux-wireless@archiver.kernel.org
	public-inbox-index linux-wireless


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/ public-inbox