linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ganapathi Bhat <gbhat@marvell.com>
To: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Cc: Cathy Luo <cluo@marvell.com>, Zhiyuan Yang <yangzy@marvell.com>,
	James Cao <jcao@marvell.com>, Rakesh Parmar <rakeshp@marvell.com>,
	Hemantkumar Suthar <shemant@marvell.com>
Subject: [PATCH v2] mwifiex: add support for sd8977 chipset
Date: Wed, 9 Jan 2019 14:46:09 +0000	[thread overview]
Message-ID: <CY4PR18MB1237AEF3375B348254E0298FA08B0@CY4PR18MB1237.namprd18.prod.outlook.com> (raw)

From a0f96e630eb5b74b047149e23c161a9f06fb2cc5 Mon Sep 17 00:00:00 2001
From: Hemantkumar Suthar <shemant@marvell.com>

This patch adds support for 8977 chipset to mwifiex with SDIO
interface. Register offsets and supported feature flags are
updated. Firmware image used will be mrvl/sd8977_uapsta.bin.

Signed-off-by: Hemantkumar Suthar <shemant@marvell.com>
Signed-off-by: Rakesh Parmar <rakeshp@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
---
 drivers/net/wireless/marvell/mwifiex/Kconfig |  2 +-
 drivers/net/wireless/marvell/mwifiex/sdio.c  |  5 ++
 drivers/net/wireless/marvell/mwifiex/sdio.h  | 70 ++++++++++++++++++++++++++++
 3 files changed, 76 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/Kconfig b/drivers/net/wireless/marvell/mwifiex/Kconfig
index 279167d..524fd56 100644
--- a/drivers/net/wireless/marvell/mwifiex/Kconfig
+++ b/drivers/net/wireless/marvell/mwifiex/Kconfig
@@ -9,7 +9,7 @@ config MWIFIEX
 	  mwifiex.
 
 config MWIFIEX_SDIO
-	tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8997"
+	tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8977/SD8997"
 	depends on MWIFIEX && MMC
 	select FW_LOADER
 	select WANT_DEV_COREDUMP
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index d49fbd5..a856483 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -489,6 +489,8 @@ static void mwifiex_sdio_coredump(struct device *dev)
 #define SDIO_DEVICE_ID_MARVELL_8887   (0x9135)
 /* Device ID for SD8801 */
 #define SDIO_DEVICE_ID_MARVELL_8801   (0x9139)
+/* Device ID for SD8977 */
+#define SDIO_DEVICE_ID_MARVELL_8977   (0x9145)
 /* Device ID for SD8997 */
 #define SDIO_DEVICE_ID_MARVELL_8997   (0x9141)
 
@@ -507,6 +509,8 @@ static void mwifiex_sdio_coredump(struct device *dev)
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8887},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8801),
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8801},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8977),
+		.driver_data = (unsigned long)&mwifiex_sdio_sd8977},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8997),
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8997},
 	{},
@@ -2726,4 +2730,5 @@ static void mwifiex_sdio_up_dev(struct mwifiex_adapter *adapter)
 MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8887_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(SD8977_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8997_DEFAULT_FW_NAME);
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.h b/drivers/net/wireless/marvell/mwifiex/sdio.h
index dccf7fd..912de2c 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.h
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.h
@@ -36,6 +36,7 @@
 #define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin"
 #define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin"
 #define SD8801_DEFAULT_FW_NAME "mrvl/sd8801_uapsta.bin"
+#define SD8977_DEFAULT_FW_NAME "mrvl/sd8977_uapsta.bin"
 #define SD8997_DEFAULT_FW_NAME "mrvl/sd8997_uapsta.bin"
 
 #define BLOCK_MODE	1
@@ -371,6 +372,59 @@ struct mwifiex_sdio_device {
 				 0x59, 0x5c, 0x5d},
 };
 
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8977 = {
+	.start_rd_port = 0,
+	.start_wr_port = 0,
+	.base_0_reg = 0xF8,
+	.base_1_reg = 0xF9,
+	.poll_reg = 0x5C,
+	.host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+		CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+	.host_int_rsr_reg = 0x4,
+	.host_int_status_reg = 0x0C,
+	.host_int_mask_reg = 0x08,
+	.status_reg_0 = 0xE8,
+	.status_reg_1 = 0xE9,
+	.sdio_int_mask = 0xff,
+	.data_port_mask = 0xffffffff,
+	.io_port_0_reg = 0xE4,
+	.io_port_1_reg = 0xE5,
+	.io_port_2_reg = 0xE6,
+	.max_mp_regs = 196,
+	.rd_bitmap_l = 0x10,
+	.rd_bitmap_u = 0x11,
+	.rd_bitmap_1l = 0x12,
+	.rd_bitmap_1u = 0x13,
+	.wr_bitmap_l = 0x14,
+	.wr_bitmap_u = 0x15,
+	.wr_bitmap_1l = 0x16,
+	.wr_bitmap_1u = 0x17,
+	.rd_len_p0_l = 0x18,
+	.rd_len_p0_u = 0x19,
+	.card_misc_cfg_reg = 0xd8,
+	.card_cfg_2_1_reg = 0xd9,
+	.cmd_rd_len_0 = 0xc0,
+	.cmd_rd_len_1 = 0xc1,
+	.cmd_rd_len_2 = 0xc2,
+	.cmd_rd_len_3 = 0xc3,
+	.cmd_cfg_0 = 0xc4,
+	.cmd_cfg_1 = 0xc5,
+	.cmd_cfg_2 = 0xc6,
+	.cmd_cfg_3 = 0xc7,
+	.fw_dump_host_ready = 0xcc,
+	.fw_dump_ctrl = 0xf0,
+	.fw_dump_start = 0xf1,
+	.fw_dump_end = 0xf8,
+	.func1_dump_reg_start = 0x10,
+	.func1_dump_reg_end = 0x17,
+	.func1_scratch_reg = 0xe8,
+	.func1_spec_reg_num = 13,
+	.func1_spec_reg_table = {0x08, 0x58, 0x5C, 0x5D,
+				 0x60, 0x61, 0x62, 0x64,
+				 0x65, 0x66, 0x68, 0x69,
+				 0x6a},
+};
+
 static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8997 = {
 	.start_rd_port = 0,
 	.start_wr_port = 0,
@@ -532,6 +586,22 @@ struct mwifiex_sdio_device {
 	.can_ext_scan = true,
 };
 
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8977 = {
+	.firmware = SD8977_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd8977,
+	.max_ports = 32,
+	.mp_agg_pkt_limit = 16,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
+	.mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+	.supports_sdio_new_mode = true,
+	.has_control_mask = false,
+	.can_dump_fw = true,
+	.fw_dump_enh = true,
+	.can_auto_tdls = false,
+	.can_ext_scan = true,
+};
+
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8997 = {
 	.firmware = SD8997_DEFAULT_FW_NAME,
 	.reg = &mwifiex_reg_sd8997,
-- 
1.9.1

             reply	other threads:[~2019-01-09 14:46 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-09 14:46 Ganapathi Bhat [this message]
2019-01-10  7:40 ` [PATCH v2] mwifiex: add support for sd8977 chipset Kalle Valo
2019-01-10  8:46   ` Ganapathi Bhat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CY4PR18MB1237AEF3375B348254E0298FA08B0@CY4PR18MB1237.namprd18.prod.outlook.com \
    --to=gbhat@marvell.com \
    --cc=cluo@marvell.com \
    --cc=jcao@marvell.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=rakeshp@marvell.com \
    --cc=shemant@marvell.com \
    --cc=yangzy@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).