From: Paul Geurts <paul_geurts@live.nl>
To: mgreer@animalcreek.com, krzk@kernel.org,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Paul Geurts <paul_geurts@live.nl>
Subject: [PATCH v2] NFC: trf7970a: disable all regulators on removal
Date: Thu, 18 Apr 2024 21:25:38 +0200 [thread overview]
Message-ID: <DB7PR09MB26847A4EBF88D9EDFEB1DA0F950E2@DB7PR09MB2684.eurprd09.prod.outlook.com> (raw)
During module probe, regulator 'vin' and 'vdd-io' are used and enabled,
but the vdd-io regulator overwrites the 'vin' regulator pointer. During
remove, only the vdd-io is disabled, as the vin regulator pointer is not
available anymore. When regulator_put() is called during resource
cleanup a kernel warning is given, as the regulator is still enabled.
Store the two regulators in separate pointers and disable both the
regulators on module remove.
Fixes: 49d22c70aaf0 ("NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage")
Signed-off-by: Paul Geurts <paul_geurts@live.nl>
---
V1 -> V2: Removed blank line between Fixes and Signed-off-by tag
drivers/nfc/trf7970a.c | 42 +++++++++++++++++++++++-------------------
1 file changed, 23 insertions(+), 19 deletions(-)
diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
index 7eb17f46a815..9e1a34e23af2 100644
--- a/drivers/nfc/trf7970a.c
+++ b/drivers/nfc/trf7970a.c
@@ -424,7 +424,8 @@ struct trf7970a {
enum trf7970a_state state;
struct device *dev;
struct spi_device *spi;
- struct regulator *regulator;
+ struct regulator *vin_regulator;
+ struct regulator *vddio_regulator;
struct nfc_digital_dev *ddev;
u32 quirks;
bool is_initiator;
@@ -1883,7 +1884,7 @@ static int trf7970a_power_up(struct trf7970a *trf)
if (trf->state != TRF7970A_ST_PWR_OFF)
return 0;
- ret = regulator_enable(trf->regulator);
+ ret = regulator_enable(trf->vin_regulator);
if (ret) {
dev_err(trf->dev, "%s - Can't enable VIN: %d\n", __func__, ret);
return ret;
@@ -1926,7 +1927,7 @@ static int trf7970a_power_down(struct trf7970a *trf)
if (trf->en2_gpiod && !(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW))
gpiod_set_value_cansleep(trf->en2_gpiod, 0);
- ret = regulator_disable(trf->regulator);
+ ret = regulator_disable(trf->vin_regulator);
if (ret)
dev_err(trf->dev, "%s - Can't disable VIN: %d\n", __func__,
ret);
@@ -2065,37 +2066,37 @@ static int trf7970a_probe(struct spi_device *spi)
mutex_init(&trf->lock);
INIT_DELAYED_WORK(&trf->timeout_work, trf7970a_timeout_work_handler);
- trf->regulator = devm_regulator_get(&spi->dev, "vin");
- if (IS_ERR(trf->regulator)) {
- ret = PTR_ERR(trf->regulator);
+ trf->vin_regulator = devm_regulator_get(&spi->dev, "vin");
+ if (IS_ERR(trf->vin_regulator)) {
+ ret = PTR_ERR(trf->vin_regulator);
dev_err(trf->dev, "Can't get VIN regulator: %d\n", ret);
goto err_destroy_lock;
}
- ret = regulator_enable(trf->regulator);
+ ret = regulator_enable(trf->vin_regulator);
if (ret) {
dev_err(trf->dev, "Can't enable VIN: %d\n", ret);
goto err_destroy_lock;
}
- uvolts = regulator_get_voltage(trf->regulator);
+ uvolts = regulator_get_voltage(trf->vin_regulator);
if (uvolts > 4000000)
trf->chip_status_ctrl = TRF7970A_CHIP_STATUS_VRS5_3;
- trf->regulator = devm_regulator_get(&spi->dev, "vdd-io");
- if (IS_ERR(trf->regulator)) {
- ret = PTR_ERR(trf->regulator);
+ trf->vddio_regulator = devm_regulator_get(&spi->dev, "vdd-io");
+ if (IS_ERR(trf->vddio_regulator)) {
+ ret = PTR_ERR(trf->vddio_regulator);
dev_err(trf->dev, "Can't get VDD_IO regulator: %d\n", ret);
- goto err_destroy_lock;
+ goto err_disable_vin_regulator;
}
- ret = regulator_enable(trf->regulator);
+ ret = regulator_enable(trf->vddio_regulator);
if (ret) {
dev_err(trf->dev, "Can't enable VDD_IO: %d\n", ret);
- goto err_destroy_lock;
+ goto err_disable_vin_regulator;
}
- if (regulator_get_voltage(trf->regulator) == 1800000) {
+ if (regulator_get_voltage(trf->vddio_regulator) == 1800000) {
trf->io_ctrl = TRF7970A_REG_IO_CTRL_IO_LOW;
dev_dbg(trf->dev, "trf7970a config vdd_io to 1.8V\n");
}
@@ -2108,7 +2109,7 @@ static int trf7970a_probe(struct spi_device *spi)
if (!trf->ddev) {
dev_err(trf->dev, "Can't allocate NFC digital device\n");
ret = -ENOMEM;
- goto err_disable_regulator;
+ goto err_disable_vddio_regulator;
}
nfc_digital_set_parent_dev(trf->ddev, trf->dev);
@@ -2137,8 +2138,10 @@ static int trf7970a_probe(struct spi_device *spi)
trf7970a_shutdown(trf);
err_free_ddev:
nfc_digital_free_device(trf->ddev);
-err_disable_regulator:
- regulator_disable(trf->regulator);
+err_disable_vddio_regulator:
+ regulator_disable(trf->vddio_regulator);
+err_disable_vin_regulator:
+ regulator_disable(trf->vin_regulator);
err_destroy_lock:
mutex_destroy(&trf->lock);
return ret;
@@ -2157,7 +2160,8 @@ static void trf7970a_remove(struct spi_device *spi)
nfc_digital_unregister_device(trf->ddev);
nfc_digital_free_device(trf->ddev);
- regulator_disable(trf->regulator);
+ regulator_disable(trf->vddio_regulator);
+ regulator_disable(trf->vin_regulator);
mutex_destroy(&trf->lock);
}
--
2.39.2
next reply other threads:[~2024-04-18 19:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-18 19:25 Paul Geurts [this message]
2024-04-18 20:49 ` [PATCH v2] NFC: trf7970a: disable all regulators on removal Krzysztof Kozlowski
2024-04-23 0:53 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DB7PR09MB26847A4EBF88D9EDFEB1DA0F950E2@DB7PR09MB2684.eurprd09.prod.outlook.com \
--to=paul_geurts@live.nl \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=mgreer@animalcreek.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).