linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: greearb@candelatech.com
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH v3 3/8] mt76 - mt7915: Add some per-station tx stats to ethtool.
Date: Thu, 22 Jul 2021 23:46:40 +0200	[thread overview]
Message-ID: <YPnnQLjRC1fHq8Ka@lore-desk> (raw)
In-Reply-To: <20210722202504.6180-3-greearb@candelatech.com>

[-- Attachment #1: Type: text/plain, Size: 4729 bytes --]

> From: Ben Greear <greearb@candelatech.com>
> 
> The tx status callback is not called for every frame, so
> those specific counters under-count, but at least they give
> some idea of what is going on.
> 
> Signed-off-by: Ben Greear <greearb@candelatech.com>
> ---
>  .../wireless/mediatek/mt76/mt7915/debugfs.c   | 116 +++++++++++++++++-
>  1 file changed, 110 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
> index 469028d641c7..ad400ddf36c3 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
> @@ -425,6 +425,35 @@ static const char mt7915_gstrings_stats[][ETH_GSTRING_LEN] = {
>  	"tx_msdu_pack_6",
>  	"tx_msdu_pack_7",
>  	"tx_msdu_pack_8",
> +	/* per vif counters */
> +	"v_tx_mpdu_attempts",
> +	"v_tx_mpdu_fail",
> +	"v_tx_mpdu_retry",
> +	"v_tx_mode_cck",
> +	"v_tx_mode_ofdm",
> +	"v_tx_mode_ht",
> +	"v_tx_mode_ht_gf",
> +	"v_tx_mode_vht",
> +	"v_tx_mode_he_su",
> +	"v_tx_mode_he_ext_su",
> +	"v_tx_mode_he_tb",
> +	"v_tx_mode_he_mu",
> +	"v_tx_bw_20",
> +	"v_tx_bw_40",
> +	"v_tx_bw_80",
> +	"v_tx_bw_160",
> +	"v_tx_mcs_0",
> +	"v_tx_mcs_1",
> +	"v_tx_mcs_2",
> +	"v_tx_mcs_3",
> +	"v_tx_mcs_4",
> +	"v_tx_mcs_5",
> +	"v_tx_mcs_6",
> +	"v_tx_mcs_7",
> +	"v_tx_mcs_8",
> +	"v_tx_mcs_9",
> +	"v_tx_mcs_10",
> +	"v_tx_mcs_11",
>  };
>  
>  #define MT7915_SSTATS_LEN ARRAY_SIZE(mt7915_gstrings_stats)
> @@ -454,14 +483,15 @@ void mt7915_debug_get_et_stats(struct ieee80211_hw *hw,
>  {
>  	struct mt7915_dev *dev = mt7915_hw_dev(hw);
>  	struct mt7915_phy *phy = mt7915_hw_phy(hw);
> -
> -	/* TODO:  These are mostly dev-wide stats at this point.
> -	 *  Get some per-vif stats?
> -	 */
> +	struct mt7915_vif *mvif = (struct mt7915_vif *)vif->drv_priv;
> +	struct mt76_wcid *wcid;
> +	struct mt7915_sta *msta;
> +	struct mt7915_sta_stats *mstats;
> +	bool found_sta = false;
>  
>  	/* See mt7915_ampdu_stat_read_phy, etc */
>  	bool ext_phy = phy != &dev->phy;
> -	int i, n, cnt;
> +	int i, j, n, cnt, next_ei;
>  	int ei = 0;
>  
>  	if (!phy)
> @@ -515,6 +545,80 @@ void mt7915_debug_get_et_stats(struct ieee80211_hw *hw,
>  	for (i = 0; i < 8; i++)
>  		data[ei++] = mt76_rr(dev,  MT_PLE_AMSDU_PACK_MSDU_CNT(i));
>  
> -	WARN_ON(ei != MT7915_SSTATS_LEN);
> +	/* Add values for all stations owned by this vif */
> +
> +	/* See mt76_get_min_avr_rssi for example of how to find all sta
> +	 * for a vif
> +	 */
> +	local_bh_disable();
> +	rcu_read_lock();
> +
> +	next_ei = ei;
> +
> +	for (i = 0; i < ARRAY_SIZE(dev->mt76.wcid_mask); i++) {
> +		u32 mask = dev->mt76.wcid_mask[i];
> +		u32 phy_mask = dev->mt76.wcid_phy_mask[i];
> +		int q;

can we use ieee80211_iterate_stations_atomic() here?

Regards,
Lorenzo

> +
> +		if (!mask)
> +			continue;
> +
> +		for (j = i * 32; mask; j++, mask >>= 1, phy_mask >>= 1) {
> +			if (!(mask & 1))
> +				continue;
> +
> +			if (!!(phy_mask & 1) != ext_phy)
> +				continue;
> +
> +			wcid = rcu_dereference(dev->mt76.wcid[j]);
> +			if (!wcid)
> +				continue;
> +
> +			msta = container_of(wcid, struct mt7915_sta, wcid);
> +
> +			if (msta->vif != mvif)
> +				continue;
> +
> +			ei = next_ei;
> +			mstats = &msta->stats;
> +			data[ei++] += mstats->tx_mpdu_attempts;
> +			data[ei++] += mstats->tx_mpdu_fail;
> +			data[ei++] += mstats->tx_mpdu_retry;
> +			data[ei++] += mstats->tx_mode[MT_PHY_TYPE_CCK];
> +			data[ei++] += mstats->tx_mode[MT_PHY_TYPE_OFDM];
> +			data[ei++] += mstats->tx_mode[MT_PHY_TYPE_HT];
> +			data[ei++] += mstats->tx_mode[MT_PHY_TYPE_HT_GF];
> +			data[ei++] += mstats->tx_mode[MT_PHY_TYPE_VHT];
> +			data[ei++] += mstats->tx_mode[MT_PHY_TYPE_HE_SU];
> +			data[ei++] += mstats->tx_mode[MT_PHY_TYPE_HE_EXT_SU];
> +			data[ei++] += mstats->tx_mode[MT_PHY_TYPE_HE_TB];
> +			data[ei++] += mstats->tx_mode[MT_PHY_TYPE_HE_MU];
> +
> +			for (q = 0; q < ARRAY_SIZE(mstats->tx_bw); q++)
> +				data[ei++] += mstats->tx_bw[q];
> +
> +			for (q = 0; q < 12; q++)
> +				data[ei++] += mstats->tx_mcs[q];
> +			found_sta = true;
> +		}
> +	}
> +
> +	rcu_read_unlock();
> +	local_bh_enable();
> +
> +	/* If we have no stations above, then we will not have filled out
> +	 * the STA stats.  Zero those stats.
> +	 */
> +	if (!found_sta) {
> +		int q;
> +
> +		for (q = 0; q < 28; q++)
> +			data[ei++] = 0;
> +	}
> +
> +	if (ei != MT7915_SSTATS_LEN) {
> +		pr_err("ei: %d  MT7915_SSTATS_LEN: %d", ei, (int)(MT7915_SSTATS_LEN));
> +		WARN_ON_ONCE(ei != MT7915_SSTATS_LEN);
> +	}
>  }
>  
> -- 
> 2.20.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2021-07-22 21:46 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-22 20:24 [PATCH v3 1/8] mt76 - mt7915: Add ethtool stats support greearb
2021-07-22 20:24 ` [PATCH v3 2/8] mt76 - mt7915: Add tx stats gathered from tx-status callbacks greearb
2021-07-22 21:45   ` Lorenzo Bianconi
2021-07-22 20:24 ` [PATCH v3 3/8] mt76 - mt7915: Add some per-station tx stats to ethtool greearb
2021-07-22 21:46   ` Lorenzo Bianconi [this message]
2021-07-22 20:25 ` [PATCH v3 4/8] mt76 - mt7915: Add tx mu/su counters to mib greearb
2021-07-22 21:48   ` Lorenzo Bianconi
2021-07-22 20:25 ` [PATCH v3 5/8] mt76 - mt7915: Move more tx-bf stats " greearb
2021-07-22 20:25 ` [PATCH v3 6/8] mt76 - mt7915: Fix he_mcs capabilities for 160mhz greearb
2021-07-22 20:25 ` [PATCH v3 7/8] mt76 - mt7915: Add more MIB registers greearb
2021-07-22 20:25 ` [PATCH v3 8/8] mt76 - mt7915: Add mib counters to ethtool stats greearb
2021-07-22 20:52 ` [PATCH v3 1/8] mt76 - mt7915: Add ethtool stats support Lorenzo Bianconi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YPnnQLjRC1fHq8Ka@lore-desk \
    --to=lorenzo@kernel.org \
    --cc=greearb@candelatech.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).