From: Zekun Shen <bruceshenzk@gmail.com>
To: bruceshenzk@gmail.com
Cc: Amitkumar Karwar <amitkarwar@gmail.com>,
Siva Rebbagondla <siva8118@gmail.com>,
Kalle Valo <kvalo@codeaurora.org>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, brendandg@nyu.edu
Subject: [PATCH] rsi_usb: Fix use-after-free in rsi_rx_done_handler
Date: Fri, 29 Oct 2021 15:49:03 -0400 [thread overview]
Message-ID: <YXxQL/vIiYcZUu/j@10-18-43-117.dynapool.wireless.nyu.edu> (raw)
When freeing rx_cb->rx_skb, the pointer is not set to NULL,
a later rsi_rx_done_handler call will try to read the freed
address.
This bug will very likley lead to double free, although
detected early as use-after-free bug.
The bug is triggerable with a compromised/malfunctional usb
device. After applying the patch, the same input no longer
triggers the use-after-free.
Attached is the kasan report from fuzzing.
BUG: KASAN: use-after-free in rsi_rx_done_handler+0x354/0x430 [rsi_usb]
Read of size 4 at addr ffff8880188e5930 by task modprobe/231
Call Trace:
<IRQ>
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
__kasan_report.cold+0x37/0x7c
? dma_direct_unmap_page+0x90/0x110
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
kasan_report+0xe/0x20
rsi_rx_done_handler+0x354/0x430 [rsi_usb]
__usb_hcd_giveback_urb+0x1e4/0x380
usb_giveback_urb_bh+0x241/0x4f0
? __usb_hcd_giveback_urb+0x380/0x380
? apic_timer_interrupt+0xa/0x20
tasklet_action_common.isra.0+0x135/0x330
__do_softirq+0x18c/0x634
? handle_irq_event+0xcd/0x157
? handle_edge_irq+0x1eb/0x7b0
irq_exit+0x114/0x140
do_IRQ+0x91/0x1e0
common_interrupt+0xf/0xf
</IRQ>
Reported-by: Zekun Shen <bruceshenzk@gmail.com>
Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
---
drivers/net/wireless/rsi/rsi_91x_usb.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 416976f09..d9e9bf26e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -272,8 +272,12 @@ static void rsi_rx_done_handler(struct urb *urb)
struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)rx_cb->data;
int status = -EINVAL;
+ if (!rx_cb->rx_skb)
+ return;
+
if (urb->status) {
dev_kfree_skb(rx_cb->rx_skb);
+ rx_cb->rx_skb = NULL;
return;
}
@@ -297,8 +301,10 @@ static void rsi_rx_done_handler(struct urb *urb)
if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num, GFP_ATOMIC))
rsi_dbg(ERR_ZONE, "%s: Failed in urb submission", __func__);
- if (status)
+ if (status) {
dev_kfree_skb(rx_cb->rx_skb);
+ rx_cb->rx_skb = NULL;
+ }
}
static void rsi_rx_urb_kill(struct rsi_hw *adapter, u8 ep_num)
--
2.25.1
next reply other threads:[~2021-10-29 19:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-29 19:49 Zekun Shen [this message]
2021-11-01 14:06 ` [PATCH] rsi_usb: Fix use-after-free in rsi_rx_done_handler Kalle Valo
2021-11-29 10:43 ` rsi: Fix use-after-free in rsi_rx_done_handler() Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YXxQL/vIiYcZUu/j@10-18-43-117.dynapool.wireless.nyu.edu \
--to=bruceshenzk@gmail.com \
--cc=amitkarwar@gmail.com \
--cc=brendandg@nyu.edu \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=siva8118@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).