linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: nbd@nbd.name
Cc: linux-wireless@vger.kernel.org, lorenzo.bianconi@redhat.com,
	sean.wang@mediatek.com, Deren.Wu@mediatek.com
Subject: [PATCH 4/9] mt76: connac: set 6G phymode in single-sku support
Date: Tue, 24 Aug 2021 12:22:22 +0200	[thread overview]
Message-ID: <a0c4e863065eca90f15e9d69c829b66baad2d66a.1629799385.git.lorenzo@kernel.org> (raw)
In-Reply-To: <cover.1629799385.git.lorenzo@kernel.org>

Configure tx rate power for 6GHz channels. This is a preliminary patch
to enable 6GHz band for mt7921 devices.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/eeprom.c   |  3 ++
 .../wireless/mediatek/mt76/mt76_connac_mcu.c  | 48 +++++++++++++++++--
 .../wireless/mediatek/mt76/mt76_connac_mcu.h  |  2 +-
 3 files changed, 49 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/eeprom.c b/drivers/net/wireless/mediatek/mt76/eeprom.c
index 3b47e85e95e7..376c3bd883e5 100644
--- a/drivers/net/wireless/mediatek/mt76/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/eeprom.c
@@ -285,6 +285,9 @@ s8 mt76_get_rate_power_limits(struct mt76_phy *phy,
 	case NL80211_BAND_5GHZ:
 		band = '5';
 		break;
+	case NL80211_BAND_6GHZ:
+		band = '6';
+		break;
 	default:
 		return target_power;
 	}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
index f5c1a7d9306e..8e1475aa35ac 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
@@ -1839,6 +1839,9 @@ static s8 mt76_connac_get_ch_power(struct mt76_phy *phy,
 	case NL80211_BAND_5GHZ:
 		sband = &phy->sband_5g.sband;
 		break;
+	case NL80211_BAND_6GHZ:
+		sband = &phy->sband_6g.sband;
+		break;
 	default:
 		return target_power;
 	}
@@ -1880,6 +1883,24 @@ mt76_connac_mcu_rate_txpower_band(struct mt76_phy *phy,
 		142, 144, 149, 151, 153, 155, 157,
 		159, 161, 165
 	};
+	static const u8 chan_list_6ghz[] = {
+		  1,   3,   5,   7,   9,  11,  13,
+		 15,  17,  19,  21,  23,  25,  27,
+		 29,  33,  35,  37,  39,  41,  43,
+		 45,  47,  49,  51,  53,  55,  57,
+		 59,  61,  65,  67,  69,  71,  73,
+		 75,  77,  79,  81,  83,  85,  87,
+		 89,  91,  93,  97,  99, 101, 103,
+		105, 107, 109, 111, 113, 115, 117,
+		119, 121, 123, 125, 129, 131, 133,
+		135, 137, 139, 141, 143, 145, 147,
+		149, 151, 153, 155, 157, 161, 163,
+		165, 167, 169, 171, 173, 175, 177,
+		179, 181, 183, 185, 187, 189, 193,
+		195, 197, 199, 201, 203, 205, 207,
+		209, 211, 213, 215, 217, 219, 221,
+		225, 227, 229, 233
+	};
 	int i, n_chan, batch_size, idx = 0, tx_power, last_ch;
 	struct mt76_connac_sku_tlv sku_tlbv;
 	struct mt76_power_limits limits;
@@ -1893,6 +1914,9 @@ mt76_connac_mcu_rate_txpower_band(struct mt76_phy *phy,
 	if (band == NL80211_BAND_2GHZ) {
 		n_chan = ARRAY_SIZE(chan_list_2ghz);
 		ch_list = chan_list_2ghz;
+	} else if (band == NL80211_BAND_6GHZ) {
+		n_chan = ARRAY_SIZE(chan_list_6ghz);
+		ch_list = chan_list_6ghz;
 	} else {
 		n_chan = ARRAY_SIZE(chan_list_5ghz);
 		ch_list = chan_list_5ghz;
@@ -1901,13 +1925,13 @@ mt76_connac_mcu_rate_txpower_band(struct mt76_phy *phy,
 
 	if (!phy->cap.has_5ghz)
 		last_ch = chan_list_2ghz[n_chan - 1];
+	else if (phy->cap.has_6ghz)
+		last_ch = chan_list_6ghz[n_chan - 1];
 	else
 		last_ch = chan_list_5ghz[n_chan - 1];
 
 	for (i = 0; i < batch_size; i++) {
-		struct mt76_connac_tx_power_limit_tlv tx_power_tlv = {
-			.band = band == NL80211_BAND_2GHZ ? 1 : 2,
-		};
+		struct mt76_connac_tx_power_limit_tlv tx_power_tlv = {};
 		int j, err, msg_len, num_ch;
 		struct sk_buff *skb;
 
@@ -1923,6 +1947,18 @@ mt76_connac_mcu_rate_txpower_band(struct mt76_phy *phy,
 		memcpy(tx_power_tlv.alpha2, dev->alpha2, sizeof(dev->alpha2));
 		tx_power_tlv.n_chan = num_ch;
 
+		switch (band) {
+		case NL80211_BAND_2GHZ:
+			tx_power_tlv.band = 1;
+			break;
+		case NL80211_BAND_6GHZ:
+			tx_power_tlv.band = 3;
+			break;
+		default:
+			tx_power_tlv.band = 2;
+			break;
+		}
+
 		for (j = 0; j < num_ch; j++, idx++) {
 			struct ieee80211_channel chan = {
 				.hw_value = ch_list[idx],
@@ -1973,6 +2009,12 @@ int mt76_connac_mcu_set_rate_txpower(struct mt76_phy *phy)
 		if (err < 0)
 			return err;
 	}
+	if (phy->cap.has_6ghz) {
+		err = mt76_connac_mcu_rate_txpower_band(phy,
+							NL80211_BAND_6GHZ);
+		if (err < 0)
+			return err;
+	}
 
 	return 0;
 }
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index cb36dd39221c..0f11574af535 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -964,7 +964,7 @@ struct mt76_connac_tx_power_limit_tlv {
 	__le16 len;
 	/* DW1 - cmd hint */
 	u8 n_chan; /* # channel */
-	u8 band; /* 2.4GHz - 5GHz */
+	u8 band; /* 2.4GHz - 5GHz - 6GHz */
 	u8 last_msg;
 	u8 pad1;
 	/* DW3 */
-- 
2.31.1


  parent reply	other threads:[~2021-08-24 10:23 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-24 10:22 [PATCH 0/9] introduce 6GHz support to mt7921 driver Lorenzo Bianconi
2021-08-24 10:22 ` [PATCH 1/9] mt76: connac: set 6G phymode in mt76_connac_get_phy_mode{,v2} Lorenzo Bianconi
2021-08-24 10:22 ` [PATCH 2/9] mt76: connac: enable 6GHz band for hw scan Lorenzo Bianconi
2021-08-24 10:22 ` [PATCH 3/9] mt76: connac: add 6GHz support to mt76_connac_mcu_set_channel_domain Lorenzo Bianconi
2021-08-24 10:22 ` Lorenzo Bianconi [this message]
2021-08-24 10:22 ` [PATCH 5/9] mt76: connac: add 6GHz support to mt76_connac_mcu_sta_tlv Lorenzo Bianconi
2021-08-24 10:22 ` [PATCH 6/9] mt76: connac: add 6GHz support to mt76_connac_mcu_uni_add_bss Lorenzo Bianconi
2021-08-24 10:22 ` [PATCH 7/9] mt76: connac: enable hw amsdu @ 6GHz Lorenzo Bianconi
2021-08-24 10:22 ` [PATCH 8/9] mt76: add 6GHz support Lorenzo Bianconi
2021-08-24 10:22 ` [PATCH 9/9] mt76: mt7921: " Lorenzo Bianconi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a0c4e863065eca90f15e9d69c829b66baad2d66a.1629799385.git.lorenzo@kernel.org \
    --to=lorenzo@kernel.org \
    --cc=Deren.Wu@mediatek.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=nbd@nbd.name \
    --cc=sean.wang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).