[PATCH] mt76: mt7921: fix kernel warning from cfg80211_calculate_bitrate

[PATCH] mt76: mt7921: fix kernel warning from cfg80211_calculate_bitrate

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Fix the kernel warning from cfg80211_calculate_bitrate
due to the legacy rate is not parsed well in current driver.

Also, zeros struct rate_info before we fill it out to avoid the old value
is kept such as rate->legacy.

[  790.921560] WARNING: CPU: 7 PID: 970 at net/wireless/util.c:1298 cfg80211_calculate_bitrate+0x354/0x35c [cfg80211]
[  790.987738] Hardware name: MediaTek Asurada rev1 board (DT)
[  790.993298] pstate: a0400009 (NzCv daif +PAN -UAO)
[  790.998104] pc : cfg80211_calculate_bitrate+0x354/0x35c [cfg80211]
[  791.004295] lr : cfg80211_calculate_bitrate+0x180/0x35c [cfg80211]
[  791.010462] sp : ffffffc0129c3880
[  791.013765] x29: ffffffc0129c3880 x28: ffffffd38305bea8
[  791.019065] x27: ffffffc0129c3970 x26: 0000000000000013
[  791.024364] x25: 00000000000003ca x24: 000000000000002f
[  791.029664] x23: 00000000000000d0 x22: ffffff8d108bc000
[  791.034964] x21: ffffff8d108bc0d0 x20: ffffffc0129c39a8
[  791.040264] x19: ffffffc0129c39a8 x18: 00000000ffff0a10
[  791.045563] x17: 0000000000000050 x16: 00000000000000ec
[  791.050910] x15: ffffffd3f9ebed9c x14: 0000000000000006
[  791.056211] x13: 00000000000b2eea x12: 0000000000000000
[  791.061511] x11: 00000000ffffffff x10: 0000000000000000
[  791.066811] x9 : 0000000000000000 x8 : 0000000000000000
[  791.072110] x7 : 0000000000000000 x6 : ffffffd3fafa5a7b
[  791.077409] x5 : 0000000000000000 x4 : 0000000000000000
[  791.082708] x3 : 0000000000000000 x2 : 0000000000000000
[  791.088008] x1 : ffffff8d3f79c918 x0 : 0000000000000000
[  791.093308] Call trace:
[  791.095770]  cfg80211_calculate_bitrate+0x354/0x35c [cfg80211]
[  791.101615]  nl80211_put_sta_rate+0x6c/0x2c0 [cfg80211]
[  791.106853]  nl80211_send_station+0x980/0xaa4 [cfg80211]
[  791.112178]  nl80211_get_station+0xb4/0x134 [cfg80211]
[  791.117308]  genl_rcv_msg+0x3a0/0x440
[  791.120960]  netlink_rcv_skb+0xcc/0x118
[  791.124785]  genl_rcv+0x34/0x48
[  791.127916]  netlink_unicast+0x144/0x1dc

Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7921/mcu.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
index cadb633639d3..27317c121256 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
@@ -328,14 +328,15 @@ mt7921_mcu_tx_rate_parse(struct mt76_phy *mphy,
 			 struct rate_info *rate, u16 r)
 {
 	struct ieee80211_supported_band *sband;
-	u16 flags = 0;
+	u16 flags = 0, rate_idx;
 	u8 txmode = FIELD_GET(MT_WTBL_RATE_TX_MODE, r);
 	u8 gi = 0;
 	u8 bw = 0;
+	bool cck = false;
 
+	memset(rate, 0, sizeof(*rate));
 	rate->mcs = FIELD_GET(MT_WTBL_RATE_MCS, r);
 	rate->nss = FIELD_GET(MT_WTBL_RATE_NSS, r) + 1;
-
 	switch (peer->bw) {
 	case IEEE80211_STA_RX_BW_160:
 		gi = peer->g16;
@@ -357,13 +358,18 @@ mt7921_mcu_tx_rate_parse(struct mt76_phy *mphy,
 
 	switch (txmode) {
 	case MT_PHY_TYPE_CCK:
+		cck = true;
+		fallthrough;
 	case MT_PHY_TYPE_OFDM:
 		if (mphy->chandef.chan->band == NL80211_BAND_5GHZ)
 			sband = &mphy->sband_5g.sband;
 		else
 			sband = &mphy->sband_2g.sband;
 
-		rate->legacy = sband->bitrates[rate->mcs].bitrate;
+		rate_idx = FIELD_GET(MT_TX_RATE_IDX, r);
+		rate_idx = mt76_get_rate(mphy->dev, sband, rate_idx,
+					 cck);
+		rate->legacy = sband->bitrates[rate_idx].bitrate;
 		break;
 	case MT_PHY_TYPE_HT:
 	case MT_PHY_TYPE_HT_GF:
-- 
2.25.1