[PATCH wireless -next] cw1200: txrx: convert comma to semicolon

[PATCH wireless -next] cw1200: txrx: convert comma to semicolon

[Zheng Yongjun]

Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
---
 drivers/net/wireless/st/cw1200/txrx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/st/cw1200/txrx.c b/drivers/net/wireless/st/cw1200/txrx.c
index 400dd585916b..7de666b90ff5 100644
--- a/drivers/net/wireless/st/cw1200/txrx.c
+++ b/drivers/net/wireless/st/cw1200/txrx.c
@@ -650,7 +650,7 @@ cw1200_tx_h_rate_policy(struct cw1200_common *priv,
 	wsm->flags |= t->txpriv.rate_id << 4;
 
 	t->rate = cw1200_get_tx_rate(priv,
-		&t->tx_info->control.rates[0]),
+		&t->tx_info->control.rates[0]);
 	wsm->max_tx_rate = t->rate->hw_value;
 	if (t->rate->flags & IEEE80211_TX_RC_MCS) {
 		if (cw1200_ht_greenfield(&priv->ht_info))
-- 
2.22.0

Re: [PATCH wireless -next] cw1200: txrx: convert comma to semicolon

[Kalle Valo]

Zheng Yongjun <zhengyongjun3@huawei.com> wrote:

> Replace a comma between expression statements by a semicolon.
> 
> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>

Patch applied to wireless-drivers-next.git, thanks.

c42d492c672a cw1200: txrx: convert comma to semicolon

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20201209135550.2004-1-zhengyongjun3@huawei.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

Re: [PATCH wireless -next] cw1200: txrx: convert comma to semicolon

[Joe Perches]

On Thu, 2020-12-10 at 18:50 +0000, Kalle Valo wrote:
> Zheng Yongjun <zhengyongjun3@huawei.com> wrote:
> 
> > Replace a comma between expression statements by a semicolon.
> > 
> > Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
> 
> Patch applied to wireless-drivers-next.git, thanks.
> 
> c42d492c672a cw1200: txrx: convert comma to semicolon
> 

There's are several of these in drivers/net/wireless:

Using a cocci script posted by Julia:
---
diff -u -p a/mediatek/mt76/mt7915/mcu.c b/mediatek/mt76/mt7915/mcu.c
--- a/mediatek/mt76/mt7915/mcu.c
+++ b/mediatek/mt76/mt7915/mcu.c
@@ -1148,7 +1148,7 @@ mt7915_mcu_sta_ba_tlv(struct sk_buff *sk
 	tlv = mt7915_mcu_add_tlv(skb, STA_REC_BA, sizeof(*ba));
 
 	ba = (struct sta_rec_ba *)tlv;
-	ba->ba_type = tx ? MT_BA_TYPE_ORIGINATOR : MT_BA_TYPE_RECIPIENT,
+	ba->ba_type = tx ? MT_BA_TYPE_ORIGINATOR : MT_BA_TYPE_RECIPIENT;
 	ba->winsize = cpu_to_le16(params->buf_size);
 	ba->ssn = cpu_to_le16(params->ssn);
 	ba->ba_en = enable << params->tid;
@@ -1676,7 +1676,7 @@ mt7915_mcu_wtbl_ht_tlv(struct sk_buff *s
 		tlv = mt7915_mcu_add_nested_tlv(skb, WTBL_VHT, sizeof(*vht),
 						wtbl_tlv, sta_wtbl);
 		vht = (struct wtbl_vht *)tlv;
-		vht->ldpc = sta->vht_cap.cap & IEEE80211_VHT_CAP_RXLDPC,
+		vht->ldpc = sta->vht_cap.cap & IEEE80211_VHT_CAP_RXLDPC;
 		vht->vht = true;
 
 		af = FIELD_GET(IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK,
@@ -2858,7 +2858,7 @@ int mt7915_mcu_init(struct mt7915_dev *d
 	};
 	int ret;
 
-	dev->mt76.mcu_ops = &mt7915_mcu_ops,
+	dev->mt76.mcu_ops = &mt7915_mcu_ops;
 
 	ret = mt7915_driver_own(dev);
 	if (ret)
diff -u -p a/mediatek/mt76/mt7615/usb_mcu.c b/mediatek/mt76/mt7615/usb_mcu.c
--- a/mediatek/mt76/mt7615/usb_mcu.c
+++ b/mediatek/mt76/mt7615/usb_mcu.c
@@ -61,7 +61,7 @@ int mt7663u_mcu_init(struct mt7615_dev *
 	};
 	int ret;
 
-	dev->mt76.mcu_ops = &mt7663u_mcu_ops,
+	dev->mt76.mcu_ops = &mt7663u_mcu_ops;
 
 	/* usb does not support runtime-pm */
 	clear_bit(MT76_STATE_PM, &dev->mphy.state);
diff -u -p a/mediatek/mt76/mt7615/mcu.c b/mediatek/mt76/mt7615/mcu.c
--- a/mediatek/mt76/mt7615/mcu.c
+++ b/mediatek/mt76/mt7615/mcu.c
@@ -982,7 +982,7 @@ mt7615_mcu_sta_ba_tlv(struct sk_buff *sk
 	tlv = mt7615_mcu_add_tlv(skb, STA_REC_BA, sizeof(*ba));
 
 	ba = (struct sta_rec_ba *)tlv;
-	ba->ba_type = tx ? MT_BA_TYPE_ORIGINATOR : MT_BA_TYPE_RECIPIENT,
+	ba->ba_type = tx ? MT_BA_TYPE_ORIGINATOR : MT_BA_TYPE_RECIPIENT;
 	ba->winsize = cpu_to_le16(params->buf_size);
 	ba->ssn = cpu_to_le16(params->ssn);
 	ba->ba_en = enable << params->tid;
@@ -2472,7 +2472,7 @@ int mt7615_mcu_init(struct mt7615_dev *d
 	};
 	int ret;
 
-	dev->mt76.mcu_ops = &mt7615_mcu_ops,
+	dev->mt76.mcu_ops = &mt7615_mcu_ops;
 
 	ret = mt7615_mcu_drv_pmctrl(dev);
 	if (ret)
diff -u -p a/mediatek/mt76/mt7615/sdio_mcu.c b/mediatek/mt76/mt7615/sdio_mcu.c
--- a/mediatek/mt76/mt7615/sdio_mcu.c
+++ b/mediatek/mt76/mt7615/sdio_mcu.c
@@ -139,7 +139,7 @@ int mt7663s_mcu_init(struct mt7615_dev *
 	if (ret)
 		return ret;
 
-	dev->mt76.mcu_ops = &mt7663s_mcu_ops,
+	dev->mt76.mcu_ops = &mt7663s_mcu_ops;
 
 	ret = mt76_get_field(dev, MT_CONN_ON_MISC, MT_TOP_MISC2_FW_N9_RDY);
 	if (ret) {
diff -u -p a/st/cw1200/txrx.c b/st/cw1200/txrx.c
--- a/st/cw1200/txrx.c
+++ b/st/cw1200/txrx.c
@@ -650,7 +650,7 @@ cw1200_tx_h_rate_policy(struct cw1200_co
 	wsm->flags |= t->txpriv.rate_id << 4;
 
 	t->rate = cw1200_get_tx_rate(priv,
-		&t->tx_info->control.rates[0]),
+		&t->tx_info->control.rates[0]);
 	wsm->max_tx_rate = t->rate->hw_value;
 	if (t->rate->flags & IEEE80211_TX_RC_MCS) {
 		if (cw1200_ht_greenfield(&priv->ht_info))
diff -u -p a/intersil/prism54/islpci_dev.c b/intersil/prism54/islpci_dev.c
--- a/intersil/prism54/islpci_dev.c
+++ b/intersil/prism54/islpci_dev.c
@@ -121,7 +121,7 @@ isl_upload_firmware(islpci_private *priv
 			while (_fw_len > 0) {
 				/* use non-swapping writel() */
 				__raw_writel(*fw_ptr, dev_fw_ptr);
-				fw_ptr++, dev_fw_ptr++;
+				fw_ptr++; dev_fw_ptr++;
 				_fw_len -= 4;
 			}
 
diff -u -p a/intel/iwlwifi/mvm/debugfs.c b/intel/iwlwifi/mvm/debugfs.c
--- a/intel/iwlwifi/mvm/debugfs.c
+++ b/intel/iwlwifi/mvm/debugfs.c
@@ -1949,7 +1949,7 @@ static ssize_t iwl_dbgfs_mem_write(struc
 		return -EFAULT;
 	}
 
-	hcmd.flags = CMD_WANT_SKB | CMD_SEND_IN_RFKILL,
+	hcmd.flags = CMD_WANT_SKB | CMD_SEND_IN_RFKILL;
 	hcmd.data[0] = (void *)cmd;
 	hcmd.len[0] = cmd_size;
 
diff -u -p a/ralink/rt2x00/rt2800lib.c b/ralink/rt2x00/rt2800lib.c
--- a/ralink/rt2x00/rt2800lib.c
+++ b/ralink/rt2x00/rt2800lib.c
@@ -3487,7 +3487,7 @@ static void rt2800_config_channel_rf55xx
 			rt2800_rfcsr_write(rt2x00dev, 52, 0x0C);
 			rt2800_rfcsr_write(rt2x00dev, 54, 0xF8);
 			if (rf->channel <= 50) {
-				rt2800_rfcsr_write(rt2x00dev, 55, 0x06),
+				rt2800_rfcsr_write(rt2x00dev, 55, 0x06);
 				rt2800_rfcsr_write(rt2x00dev, 56, 0xD3);
 			} else if (rf->channel >= 52) {
 				rt2800_rfcsr_write(rt2x00dev, 55, 0x04);