From: Alexey Khoroshilov <khoroshilov@ispras.ru>
To: Dmitry Antipov <dmantipov@yandex.ru>,
Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Kalle Valo <kvalo@kernel.org>,
linux-wireless@vger.kernel.org, lvc-project@linuxtesting.org,
ath10k@lists.infradead.org
Subject: Re: [lvc-project] [PATCH] [v2] wifi: ath10k: cleanup CE initialization
Date: Wed, 23 Aug 2023 13:03:01 +0300 [thread overview]
Message-ID: <fb14be76-c3af-8ede-38aa-8b88f3cea7b7@ispras.ru> (raw)
In-Reply-To: <20230823095008.50515-1-dmantipov@yandex.ru>
You could also use
git format-patch -v 2
to get Subject with version in it:
[PATCH v2 1/3]
[PATCH v2 2/3]
[PATCH v2 3/3]
> v2: adjust to match series
Do mean that nothing has been changed in the patch regarding the
previous version?
--
Alexey
On 23.08.2023 12:50, Dmitry Antipov wrote:
> Commit 25d0dbcbd5c7 ("ath10k: split ce initialization and allocation")
> changes 'ath10k_ce_init_src_ring()' and 'ath10k_ce_init_dest_ring()'
> so these functions can't return -ENOMEM but always returns 0. This way
> both of the above may be converted to 'void' and related code may be
> simplified as well.
>
> Found by Linux Verification Center (linuxtesting.org) with SVACE.
>
> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
> ---
> v2: change 'ath10k_ce_alloc_rri()' to return -ENOMEM in case
> of 'dma_alloc_coherent()' failure and fix error handling in
> 'ath10k_snoc_hif_power_up()'
> ---
> drivers/net/wireless/ath/ath10k/ahb.c | 6 +---
> drivers/net/wireless/ath/ath10k/ce.c | 50 +++++++++-----------------
> drivers/net/wireless/ath/ath10k/ce.h | 6 ++--
> drivers/net/wireless/ath/ath10k/pci.c | 29 ++++-----------
> drivers/net/wireless/ath/ath10k/pci.h | 2 +-
> drivers/net/wireless/ath/ath10k/snoc.c | 30 +++++-----------
> 6 files changed, 36 insertions(+), 87 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
> index 76efea2f1138..c3a2eeb5542d 100644
> --- a/drivers/net/wireless/ath/ath10k/ahb.c
> +++ b/drivers/net/wireless/ath/ath10k/ahb.c
> @@ -655,11 +655,7 @@ static int ath10k_ahb_hif_power_up(struct ath10k *ar,
> goto out;
> }
>
> - ret = ath10k_pci_init_pipes(ar);
> - if (ret) {
> - ath10k_err(ar, "failed to initialize CE: %d\n", ret);
> - goto out;
> - }
> + ath10k_pci_init_pipes(ar);
>
> ret = ath10k_pci_init_config(ar);
> if (ret) {
> diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
> index c27b8204718a..d7275dcc1f99 100644
> --- a/drivers/net/wireless/ath/ath10k/ce.c
> +++ b/drivers/net/wireless/ath/ath10k/ce.c
> @@ -1352,9 +1352,9 @@ void ath10k_ce_enable_interrupts(struct ath10k *ar)
> }
> EXPORT_SYMBOL(ath10k_ce_enable_interrupts);
>
> -static int ath10k_ce_init_src_ring(struct ath10k *ar,
> - unsigned int ce_id,
> - const struct ce_attr *attr)
> +static void ath10k_ce_init_src_ring(struct ath10k *ar,
> + unsigned int ce_id,
> + const struct ce_attr *attr)
> {
> struct ath10k_ce *ce = ath10k_ce_priv(ar);
> struct ath10k_ce_pipe *ce_state = &ce->ce_states[ce_id];
> @@ -1389,13 +1389,11 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar,
> ath10k_dbg(ar, ATH10K_DBG_BOOT,
> "boot init ce src ring id %d entries %d base_addr %pK\n",
> ce_id, nentries, src_ring->base_addr_owner_space);
> -
> - return 0;
> }
>
> -static int ath10k_ce_init_dest_ring(struct ath10k *ar,
> - unsigned int ce_id,
> - const struct ce_attr *attr)
> +static void ath10k_ce_init_dest_ring(struct ath10k *ar,
> + unsigned int ce_id,
> + const struct ce_attr *attr)
> {
> struct ath10k_ce *ce = ath10k_ce_priv(ar);
> struct ath10k_ce_pipe *ce_state = &ce->ce_states[ce_id];
> @@ -1427,8 +1425,6 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar,
> ath10k_dbg(ar, ATH10K_DBG_BOOT,
> "boot ce dest ring id %d entries %d base_addr %pK\n",
> ce_id, nentries, dest_ring->base_addr_owner_space);
> -
> - return 0;
> }
>
> static int ath10k_ce_alloc_shadow_base(struct ath10k *ar,
> @@ -1659,30 +1655,14 @@ ath10k_ce_alloc_dest_ring_64(struct ath10k *ar, unsigned int ce_id,
> * initialization. It may be that only one side or the other is
> * initialized by software/firmware.
> */
> -int ath10k_ce_init_pipe(struct ath10k *ar, unsigned int ce_id,
> - const struct ce_attr *attr)
> +void ath10k_ce_init_pipe(struct ath10k *ar, unsigned int ce_id,
> + const struct ce_attr *attr)
> {
> - int ret;
> -
> - if (attr->src_nentries) {
> - ret = ath10k_ce_init_src_ring(ar, ce_id, attr);
> - if (ret) {
> - ath10k_err(ar, "Failed to initialize CE src ring for ID: %d (%d)\n",
> - ce_id, ret);
> - return ret;
> - }
> - }
> -
> - if (attr->dest_nentries) {
> - ret = ath10k_ce_init_dest_ring(ar, ce_id, attr);
> - if (ret) {
> - ath10k_err(ar, "Failed to initialize CE dest ring for ID: %d (%d)\n",
> - ce_id, ret);
> - return ret;
> - }
> - }
> + if (attr->src_nentries)
> + ath10k_ce_init_src_ring(ar, ce_id, attr);
>
> - return 0;
> + if (attr->dest_nentries)
> + ath10k_ce_init_dest_ring(ar, ce_id, attr);
> }
> EXPORT_SYMBOL(ath10k_ce_init_pipe);
>
> @@ -1926,7 +1906,7 @@ int ath10k_ce_alloc_pipe(struct ath10k *ar, int ce_id,
> }
> EXPORT_SYMBOL(ath10k_ce_alloc_pipe);
>
> -void ath10k_ce_alloc_rri(struct ath10k *ar)
> +int ath10k_ce_alloc_rri(struct ath10k *ar)
> {
> int i;
> u32 value;
> @@ -1939,7 +1919,7 @@ void ath10k_ce_alloc_rri(struct ath10k *ar)
> &ce->paddr_rri, GFP_KERNEL);
>
> if (!ce->vaddr_rri)
> - return;
> + return -ENOMEM;
>
> ath10k_ce_write32(ar, ar->hw_ce_regs->ce_rri_low,
> lower_32_bits(ce->paddr_rri));
> @@ -1954,6 +1934,8 @@ void ath10k_ce_alloc_rri(struct ath10k *ar)
> value |= ar->hw_ce_regs->upd->mask;
> ath10k_ce_write32(ar, ce_base_addr + ctrl1_regs, value);
> }
> +
> + return 0;
> }
> EXPORT_SYMBOL(ath10k_ce_alloc_rri);
>
> diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
> index 666ce384a1d8..c90c00316356 100644
> --- a/drivers/net/wireless/ath/ath10k/ce.h
> +++ b/drivers/net/wireless/ath/ath10k/ce.h
> @@ -220,8 +220,8 @@ int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state,
>
> /*==================CE Engine Initialization=======================*/
>
> -int ath10k_ce_init_pipe(struct ath10k *ar, unsigned int ce_id,
> - const struct ce_attr *attr);
> +void ath10k_ce_init_pipe(struct ath10k *ar, unsigned int ce_id,
> + const struct ce_attr *attr);
> void ath10k_ce_deinit_pipe(struct ath10k *ar, unsigned int ce_id);
> int ath10k_ce_alloc_pipe(struct ath10k *ar, int ce_id,
> const struct ce_attr *attr);
> @@ -262,7 +262,7 @@ void ath10k_ce_enable_interrupts(struct ath10k *ar);
> void ath10k_ce_dump_registers(struct ath10k *ar,
> struct ath10k_fw_crash_data *crash_data);
>
> -void ath10k_ce_alloc_rri(struct ath10k *ar);
> +int ath10k_ce_alloc_rri(struct ath10k *ar);
> void ath10k_ce_free_rri(struct ath10k *ar);
>
> /* ce_attr.flags values */
> diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
> index a7f44f6335fb..f6988075cd83 100644
> --- a/drivers/net/wireless/ath/ath10k/pci.c
> +++ b/drivers/net/wireless/ath/ath10k/pci.c
> @@ -2524,21 +2524,13 @@ void ath10k_pci_free_pipes(struct ath10k *ar)
> ath10k_ce_free_pipe(ar, i);
> }
>
> -int ath10k_pci_init_pipes(struct ath10k *ar)
> +void ath10k_pci_init_pipes(struct ath10k *ar)
> {
> struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
> - int i, ret;
> -
> - for (i = 0; i < CE_COUNT; i++) {
> - ret = ath10k_ce_init_pipe(ar, i, &ar_pci->attr[i]);
> - if (ret) {
> - ath10k_err(ar, "failed to initialize copy engine pipe %d: %d\n",
> - i, ret);
> - return ret;
> - }
> - }
> + int i;
>
> - return 0;
> + for (i = 0; i < CE_COUNT; i++)
> + ath10k_ce_init_pipe(ar, i, &ar_pci->attr[i]);
> }
>
> static bool ath10k_pci_has_fw_crashed(struct ath10k *ar)
> @@ -2703,12 +2695,7 @@ static int ath10k_pci_qca988x_chip_reset(struct ath10k *ar)
> * sufficient to verify if device is capable of booting
> * firmware blob.
> */
> - ret = ath10k_pci_init_pipes(ar);
> - if (ret) {
> - ath10k_warn(ar, "failed to init copy engine: %d\n",
> - ret);
> - continue;
> - }
> + ath10k_pci_init_pipes(ar);
>
> ret = ath10k_pci_diag_read32(ar, QCA988X_HOST_INTEREST_ADDRESS,
> &val);
> @@ -2846,11 +2833,7 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar,
> goto err_sleep;
> }
>
> - ret = ath10k_pci_init_pipes(ar);
> - if (ret) {
> - ath10k_err(ar, "failed to initialize CE: %d\n", ret);
> - goto err_sleep;
> - }
> + ath10k_pci_init_pipes(ar);
>
> ret = ath10k_pci_init_config(ar);
> if (ret) {
> diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
> index 480cd97ab739..3b3ded87aef9 100644
> --- a/drivers/net/wireless/ath/ath10k/pci.h
> +++ b/drivers/net/wireless/ath/ath10k/pci.h
> @@ -238,7 +238,7 @@ void ath10k_pci_free_pipes(struct ath10k *ar);
> void ath10k_pci_rx_replenish_retry(struct timer_list *t);
> void ath10k_pci_ce_deinit(struct ath10k *ar);
> void ath10k_pci_init_napi(struct ath10k *ar);
> -int ath10k_pci_init_pipes(struct ath10k *ar);
> +void ath10k_pci_init_pipes(struct ath10k *ar);
> int ath10k_pci_init_config(struct ath10k *ar);
> void ath10k_pci_rx_post(struct ath10k *ar);
> void ath10k_pci_flush(struct ath10k *ar);
> diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
> index 26214c00cd0d..f41948d9eebb 100644
> --- a/drivers/net/wireless/ath/ath10k/snoc.c
> +++ b/drivers/net/wireless/ath/ath10k/snoc.c
> @@ -939,20 +939,12 @@ static int ath10k_snoc_hif_start(struct ath10k *ar)
> return 0;
> }
>
> -static int ath10k_snoc_init_pipes(struct ath10k *ar)
> +static void ath10k_snoc_init_pipes(struct ath10k *ar)
> {
> - int i, ret;
> -
> - for (i = 0; i < CE_COUNT; i++) {
> - ret = ath10k_ce_init_pipe(ar, i, &host_ce_config_wlan[i]);
> - if (ret) {
> - ath10k_err(ar, "failed to initialize copy engine pipe %d: %d\n",
> - i, ret);
> - return ret;
> - }
> - }
> + int i;
>
> - return 0;
> + for (i = 0; i < CE_COUNT; i++)
> + ath10k_ce_init_pipe(ar, i, &host_ce_config_wlan[i]);
> }
>
> static int ath10k_snoc_wlan_enable(struct ath10k *ar,
> @@ -1082,18 +1074,14 @@ static int ath10k_snoc_hif_power_up(struct ath10k *ar,
> goto err_hw_power_off;
> }
>
> - ath10k_ce_alloc_rri(ar);
> -
> - ret = ath10k_snoc_init_pipes(ar);
> - if (ret) {
> - ath10k_err(ar, "failed to initialize CE: %d\n", ret);
> - goto err_free_rri;
> - }
> + ret = ath10k_ce_alloc_rri(ar);
> + if (ret)
> + goto err_snoc_wlan_disable;
>
> + ath10k_snoc_init_pipes(ar);
> return 0;
>
> -err_free_rri:
> - ath10k_ce_free_rri(ar);
> +err_snoc_wlan_disable:
> ath10k_snoc_wlan_disable(ar);
>
> err_hw_power_off:
>
next prev parent reply other threads:[~2023-08-23 10:03 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-23 9:50 [PATCH] [v2] wifi: ath10k: cleanup CE initialization Dmitry Antipov
2023-08-23 9:50 ` [PATCH 2/3] [v2] wifi: ath10k: simplify ath10k_peer_assoc_h_vht() Dmitry Antipov
2023-08-23 14:55 ` Jeff Johnson
2023-08-23 9:50 ` [PATCH 3/3] [v2] wifi: ath10k: simplify ath10k_pci_pm_suspend() Dmitry Antipov
2023-08-23 14:57 ` Jeff Johnson
2023-08-23 10:03 ` Alexey Khoroshilov [this message]
2023-08-23 10:13 ` [lvc-project] [PATCH] [v2] wifi: ath10k: cleanup CE initialization Antipov, Dmitriy
2023-08-25 7:47 ` Kalle Valo
2023-08-23 14:53 ` Jeff Johnson
2023-08-24 5:51 ` [PATCH 1/6] [v3] wifi: ath10k: cleanup CE ring initialization Dmitry Antipov
2023-08-24 5:51 ` [PATCH 2/6] [v3] wifi: ath10k: simplify ath10k_ce_init_pipe() Dmitry Antipov
2023-08-24 15:26 ` Jeff Johnson
2023-08-24 5:51 ` [PATCH 3/6] [v3] wifi: ath10k: cleanup CE pipes initialization Dmitry Antipov
2023-08-24 15:27 ` Jeff Johnson
2023-08-24 5:51 ` [PATCH 4/6] [v3] wifi: ath10k: do not ignore possible dma_alloc_coherent() error Dmitry Antipov
2023-08-24 15:27 ` Jeff Johnson
2023-08-24 5:51 ` [PATCH 5/6] [v3] wifi: ath10k: simplify ath10k_peer_assoc_h_vht() Dmitry Antipov
2023-08-24 5:51 ` [PATCH 6/6] [v3] wifi: ath10k: simplify ath10k_pci_pm_suspend() Dmitry Antipov
2023-08-24 15:26 ` [PATCH 1/6] [v3] wifi: ath10k: cleanup CE ring initialization Jeff Johnson
2023-09-20 13:23 ` Kalle Valo
2023-09-21 8:58 ` Dmitry Antipov
2023-09-21 9:33 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fb14be76-c3af-8ede-38aa-8b88f3cea7b7@ispras.ru \
--to=khoroshilov@ispras.ru \
--cc=ath10k@lists.infradead.org \
--cc=dmantipov@yandex.ru \
--cc=kvalo@kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lvc-project@linuxtesting.org \
--cc=quic_jjohnson@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).