From: Luca Coelho <luca@coelho.fi>
To: kvalo@codeaurora.org
Cc: luca@coelho.fi, linux-wireless@vger.kernel.org
Subject: [PATCH 08/10] iwlwifi: api: remove unused RX status bits
Date: Sun, 17 Oct 2021 11:43:46 +0300 [thread overview]
Message-ID: <iwlwifi.20211017113927.022a9f87fdbd.Iae7b8a0196b6e94f9dc525e92a541a28374b0cac@changeid> (raw)
In-Reply-To: <20211017084348.401570-1-luca@coelho.fi>
From: Johannes Berg <johannes.berg@intel.com>
These bits are unused and don't actually exist in the firmware
API any longer. Remove them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
---
drivers/net/wireless/intel/iwlwifi/fw/api/rx.h | 16 +---------------
1 file changed, 1 insertion(+), 15 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h b/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h
index 88d600b376dc..aa43ef67a2b5 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h
@@ -125,14 +125,12 @@ enum iwl_rx_phy_flags {
* @RX_MPDU_RES_STATUS_OVERRUN_OK: there was no RXE overflow
* @RX_MPDU_RES_STATUS_SRC_STA_FOUND: station was found
* @RX_MPDU_RES_STATUS_KEY_VALID: key was valid
- * @RX_MPDU_RES_STATUS_KEY_PARAM_OK: key parameters were usable
* @RX_MPDU_RES_STATUS_ICV_OK: ICV is fine, if not, the packet is destroyed
* @RX_MPDU_RES_STATUS_MIC_OK: used for CCM alg only. TKIP MIC is checked
* in the driver.
* @RX_MPDU_RES_STATUS_TTAK_OK: TTAK is fine
* @RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR: valid for alg = CCM_CMAC or
- * alg = CCM only. Checks replay attack for 11w frames. Relevant only if
- * %RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME is set.
+ * alg = CCM only. Checks replay attack for 11w frames.
* @RX_MPDU_RES_STATUS_SEC_NO_ENC: this frame is not encrypted
* @RX_MPDU_RES_STATUS_SEC_WEP_ENC: this frame is encrypted using WEP
* @RX_MPDU_RES_STATUS_SEC_CCM_ENC: this frame is encrypted using CCM
@@ -144,9 +142,6 @@ enum iwl_rx_phy_flags {
* @RX_MPDU_RES_STATUS_SEC_ENC_ERR: this frame couldn't be decrypted
* @RX_MPDU_RES_STATUS_SEC_ENC_MSK: bitmask of the encryption algorithm
* @RX_MPDU_RES_STATUS_DEC_DONE: this frame has been successfully decrypted
- * @RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP: extended IV (set with TKIP)
- * @RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT: key ID comparison done
- * @RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME: this frame is an 11w management frame
* @RX_MPDU_RES_STATUS_CSUM_DONE: checksum was done by the hw
* @RX_MPDU_RES_STATUS_CSUM_OK: checksum found no errors
* @RX_MPDU_RES_STATUS_STA_ID_MSK: station ID mask
@@ -157,7 +152,6 @@ enum iwl_mvm_rx_status {
RX_MPDU_RES_STATUS_OVERRUN_OK = BIT(1),
RX_MPDU_RES_STATUS_SRC_STA_FOUND = BIT(2),
RX_MPDU_RES_STATUS_KEY_VALID = BIT(3),
- RX_MPDU_RES_STATUS_KEY_PARAM_OK = BIT(4),
RX_MPDU_RES_STATUS_ICV_OK = BIT(5),
RX_MPDU_RES_STATUS_MIC_OK = BIT(6),
RX_MPDU_RES_STATUS_TTAK_OK = BIT(7),
@@ -171,9 +165,6 @@ enum iwl_mvm_rx_status {
RX_MPDU_RES_STATUS_SEC_ENC_ERR = (7 << 8),
RX_MPDU_RES_STATUS_SEC_ENC_MSK = (7 << 8),
RX_MPDU_RES_STATUS_DEC_DONE = BIT(11),
- RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP = BIT(13),
- RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT = BIT(14),
- RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME = BIT(15),
RX_MPDU_RES_STATUS_CSUM_DONE = BIT(16),
RX_MPDU_RES_STATUS_CSUM_OK = BIT(17),
RX_MDPU_RES_STATUS_STA_ID_SHIFT = 24,
@@ -235,7 +226,6 @@ enum iwl_rx_mpdu_status {
IWL_RX_MPDU_STATUS_OVERRUN_OK = BIT(1),
IWL_RX_MPDU_STATUS_SRC_STA_FOUND = BIT(2),
IWL_RX_MPDU_STATUS_KEY_VALID = BIT(3),
- IWL_RX_MPDU_STATUS_KEY_PARAM_OK = BIT(4),
IWL_RX_MPDU_STATUS_ICV_OK = BIT(5),
IWL_RX_MPDU_STATUS_MIC_OK = BIT(6),
IWL_RX_MPDU_RES_STATUS_TTAK_OK = BIT(7),
@@ -250,12 +240,8 @@ enum iwl_rx_mpdu_status {
IWL_RX_MPDU_STATUS_SEC_EXT_ENC = 0x4 << 8,
IWL_RX_MPDU_STATUS_SEC_GCM = 0x5 << 8,
IWL_RX_MPDU_STATUS_DECRYPTED = BIT(11),
- IWL_RX_MPDU_STATUS_WEP_MATCH = BIT(12),
- IWL_RX_MPDU_STATUS_EXT_IV_MATCH = BIT(13),
- IWL_RX_MPDU_STATUS_KEY_ID_MATCH = BIT(14),
IWL_RX_MPDU_STATUS_ROBUST_MNG_FRAME = BIT(15),
- IWL_RX_MPDU_STATUS_KEY = 0x3f0000,
IWL_RX_MPDU_STATUS_DUPLICATE = BIT(22),
IWL_RX_MPDU_STATUS_STA_ID = 0x1f000000,
--
2.33.0
next prev parent reply other threads:[~2021-10-17 8:44 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-17 8:43 [PATCH 00/10] iwlwifi: updates intended for v5.16 2021-10-17 Luca Coelho
2021-10-17 8:43 ` [PATCH 01/10] iwlwifi: mvm: fix ieee80211_get_he_iftype_cap() iftype Luca Coelho
2021-10-22 7:50 ` Luca Coelho
2021-10-17 8:43 ` [PATCH 02/10] iwlwifi: mvm: disable RX-diversity in powersave Luca Coelho
2021-10-17 8:43 ` [PATCH 03/10] iwlwifi: mvm: add lmac/umac PC info in case of error Luca Coelho
2021-10-17 8:43 ` [PATCH 04/10] iwlwifi: add vendor specific capabilities for some RFs Luca Coelho
2021-10-17 8:43 ` [PATCH 05/10] iwlwifi: mvm: add support for 160Mhz in ranging measurements Luca Coelho
2021-10-17 8:43 ` [PATCH 06/10] iwlwifi: mvm: Remove antenna c references Luca Coelho
2021-10-17 8:43 ` [PATCH 07/10] iwlwifi: add some missing kernel-doc in struct iwl_fw Luca Coelho
2021-10-17 8:43 ` Luca Coelho [this message]
2021-10-17 8:43 ` [PATCH 09/10] iwlwifi: remove MODULE_AUTHOR() statements Luca Coelho
2021-10-17 8:43 ` [PATCH 10/10] iwlwifi: remove contact information Luca Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=iwlwifi.20211017113927.022a9f87fdbd.Iae7b8a0196b6e94f9dc525e92a541a28374b0cac@changeid \
--to=luca@coelho.fi \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).