From: Mladen Horvat <acid-burn@opendreambox.org>
To: linux-wireless@vger.kernel.org
Subject: zd1211rw couldn't load firmware. Error number -145 with Kernel 2.6.30
Date: Wed, 29 Jul 2009 11:28:30 +0000 (UTC) [thread overview]
Message-ID: <loom.20090729T111851-320@post.gmane.org> (raw)
Hello all,
i am running Kernel 2.6.30 on a embedded linux stb and trying with two
different zd1211b usb wlan sticks to get the zd1211rw driver running.
just as a remark: an rt73usb stick works without problems.
Dont know what you need. so here is some informations:
uname -a
Linux dm7025 2.6.30-dm7025 #1 Tue Jul 28 20:25:28 CEST 2009 mips unknown
lsmod
Tainted: P
arc4 1536 2 - Live 0xc05c5000
ecb 2880 2 - Live 0xc05bc000
cryptomgr 87872 0 - Live 0xc059d000
crypto_hash 11840 1 cryptomgr, Live 0xc057a000
crypto_blkcipher 13232 2 ecb,cryptomgr, Live 0xc056c000
aead 7168 1 cryptomgr, Live 0xc0560000
pcompress 1952 1 cryptomgr, Live 0xc0558000
crypto_algapi 18176 7
arc4,ecb,cryptomgr,crypto_hash,crypto_blkcipher,aead,pcompress, Live 0xc054a000
zd1211rw 78736 0 - Live 0xc0527000
mac80211 174976 1 zd1211rw, Live 0xc04d6000
crypto 13360 8
ecb,cryptomgr,crypto_hash,crypto_blkcipher,aead,pcompress,crypto_algapi,
mac80211, Live
0xc048c000
cfg80211 79216 2 zd1211rw,mac80211, Live 0xc046e000
rfmod 3808 1 - Live 0xc0448000 (P)
dreambox_keyboard 5248 0 - Live 0xc043d000 (P)
dreambox_rc2 5248 1 dreambox_keyboard, Live 0xc0431000 (P)
xilleon 222592 6 - Live 0xc0185000 (P)
alps_bsbe1_c01a 19568 1 xilleon, Live 0xc0132000 (P)
alps_bsbe1 5264 1 xilleon, Live 0xc0124000 (P)
avs 11168 1 xilleon, Live 0xc0117000 (P)
alps_bsbe2 44480 1 xilleon, Live 0xc0103000 (P)
lnb_ctrl 5664 3 alps_bsbe1_c01a,alps_bsbe1,alps_bsbe2, Live 0xc00f0000 (P)
tu1216 44912 1 xilleon, Live 0xc00de000
cu1216mk3 9504 1 xilleon, Live 0xc00c9000 (P)
stb_core 52704 10
dreambox_keyboard,dreambox_rc2,xilleon,alps_bsbe1_c01a,avs,alps_bsbe2,
lnb_ctrl,cu1216mk3,
Live 0xc00b1000 (P)
pata_xilleon 3888 1 - Live 0xc0095000
lcd 30800 1 - Live 0xc0084000 (P)
fp 21840 4 xilleon,avs,lcd, Live 0xc0072000 (P)
Output from DMESG:
[ 279.131000] cfg80211: Calling CRDA to update world regulatory domain
[ 279.509000] zd1211rw usb_init()
[ 279.520000] usbcore: registered new interface driver zd1211rw
[ 279.526000] zd1211rw initialized
[ 292.405000] usb 1-1: new full speed USB device using ohci_hcd
and address 2
[ 292.557000] usb 1-1: configuration #1 chosen from 1 choice
[ 292.573000] usb 1-1: print_id() 050d:705c v4810 full
[ 292.686000] usb 1-1: reset full speed USB device using ohci_hcd
and address 2
[ 292.829000] zd1211rw 1-1:1.0: zd_chip_read_mac_addr_fw()
[ 293.308000] phy0: Selected rate control algorithm 'pid'
[ 293.309000] zd1211rw 1-1:1.0: probe() successful
[ 293.309000] zd1211rw 1-1:1.0: phy0
[ 359.661000] warning: `vsftpd' uses 32-bit capabilities (legacy support in use)
[ 408.957000] zd1211rw 1-1:1.0: zd_usb_init_hw()
[ 408.957000] usb 1-1: request_fw_file() fw name zd1211/zd1211b_ub
[ 408.957000] usb 1-1: firmware: requesting zd1211/zd1211b_ub
[ 409.022000] usb 1-1: upload_firmware() firmware device id 0x4810 is equal
to
the actual device id
[ 409.022000] usb 1-1: request_fw_file() fw name zd1211/zd1211b_uphr
[ 409.022000] usb 1-1: firmware: requesting zd1211/zd1211b_uphr
[ 409.079000] usb 1-1: upload_code() transfer size 4018
[ 409.094000] usb 1-1: upload_code() firmware confirm return value 0x01
[ 414.094000] zd1211rw 1-1:1.0: zd_usb_init_hw()
couldn't reset configuration. Error number -145
[ 415.226000] zd1211rw 1-1:1.0: zd_usb_init_hw()
[ 415.226000] usb 1-1: request_fw_file() fw name zd1211/zd1211b_ub
[ 415.226000] usb 1-1: firmware: requesting zd1211/zd1211b_ub
[ 415.271000] usb 1-1: upload_firmware()
firmware device id 0x4810 is equal to the actual device id
[ 415.271000] usb 1-1: request_fw_file() fw name zd1211/zd1211b_uphr
[ 415.271000] usb 1-1: firmware: requesting zd1211/zd1211b_uphr
[ 415.350000] usb 1-1: upload_code() transfer size 4018
[ 416.350000] usb 1-1: USB control request for firmware upload failed.
Error number -145
[ 416.358000] usb 1-1: Could not upload firmware code uph. Error number -145
[ 416.365000] zd1211rw 1-1:1.0: couldn't load firmware. Error number -145
[ 432.484000] zd1211rw 1-1:1.0: zd_usb_init_hw()
[ 432.484000] usb 1-1: request_fw_file() fw name zd1211/zd1211b_ub
[ 432.484000] usb 1-1: firmware: requesting zd1211/zd1211b_ub
[ 432.529000] usb 1-1: upload_firmware()
firmware device id 0x4810 is equal to the actual device id
[ 432.529000] usb 1-1: request_fw_file() fw name zd1211/zd1211b_uphr
[ 432.529000] usb 1-1: firmware: requesting zd1211/zd1211b_uphr
[ 432.608000] usb 1-1: upload_code() transfer size 4018
[ 433.608000] usb 1-1: USB control request for firmware upload failed.
Error number -145
[ 433.616000] usb 1-1: Could not upload firmware code uph. Error number -145
[ 433.623000] zd1211rw 1-1:1.0: couldn't load firmware. Error number -145
[ 434.827000] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
output from lsusb
Bus 001 Device 002: ID 050d:705c Belkin Components
the Firmware Files are located with correct right under /lib/firmware/zd1211
any idea on this ?
Regards
Mladen
next reply other threads:[~2009-07-29 11:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-29 11:28 Mladen Horvat [this message]
2009-07-29 11:50 ` zd1211rw couldn't load firmware. Error number -145 with Kernel 2.6.30 Holger Schurig
2009-07-29 12:08 ` Mladen Horvat
2009-07-30 3:43 ` Hin-Tak Leung
2009-07-30 8:32 ` Mladen Horvat
2009-07-30 13:14 ` Mladen Horvat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=loom.20090729T111851-320@post.gmane.org \
--to=acid-burn@opendreambox.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).