From: Victhor Foster <firstname.lastname@example.org> To: email@example.com Subject: Interfacing mac802154 stack with userspace applications Date: Fri, 25 Oct 2019 19:20:09 -0300 (BRT) Message-ID: <547191739.3620092.1572042009933.JavaMail.firstname.lastname@example.org> (raw) Hello, I'm working on a project to implement a 6LoWPAN network using software defined radios. I'm trying to interface the kernel's 802.15.4/6LoWPAN stacks to my physical layer implemented in GNU Radio, instead of using a userspace stack, but this isn't working very well. The reason why I'm doing this is, while the GNU Radio plugin I'm using (gr-ieee802-15-4 from Bastian Bloessl) implements its own 802.15.4 MAC layer, I'd like to get around its limitations (such as not being able to change destination addresses at runtime) using the Linux kernel stack. The way this is being done is I have socat piping between a mac802154_hwsim interface and GNU Radio, using the following arguments: INTERFACE:wpan0 UDP4-DATAGRAM:127.0.0.1:<port> GNU Radio is running a UDP server at <port> that transmits and receives PDUs to/from the software defined PHY, which then goes out to a software defined radio device (a USRP N210, in this case). So the PDUs are sent via the socat pipe to the hwsim network interface and vice-versa. The 802.15.4 MAC block is removed. While 802.15.4 packets are sent and received by both hosts, it seems these packets aren't getting through to the 6LoWPAN stack. During testing, I had packet capture set up on both the 802.15.4 ("wpan0") and the 6LoWPAN ("lowpan0") interfaces. The wpan0 interface was receiving packets from the other host (and also from itself, as the radio is full duplex), as expected. However, I could not get wpan-ping to work (timeout) and ping6, netcat, etc. wouldn't get a response from the other host. On the lowpan0 interface, I could see the packets originating from applications would appear on the packet capture log, but those that should be coming from the wpan0 interface wouldn't, even those originating from the host itself (due to the full duplex nature of the radio). I also noticed the following message on the kernel log: ieee802154 phy0 wpan0: encryption failed: -22 I haven't touched the link encryption settings, so the traffic is unencrypted. What could be done to get the 6LoWPAN stack to accept packets injected into the 802.15.4 interface by socat? I realize this is a very unusual situation, but I'm not familiar with the Linux 802.15.4 stack.
next reply index Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-25 22:20 Victhor Foster [this message] 2019-11-06 14:02 ` Alexander Aring 2019-11-12 9:03 ` Victhor Foster 2020-03-10 0:25 ` Victhor Foster 2020-03-13 13:54 ` Alexander Aring 2020-03-13 22:21 ` Victhor Foster
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=547191739.3620092.1572042009933.JavaMail.email@example.com \ --firstname.lastname@example.org \ --email@example.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Linux-WPAN Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/linux-wpan/0 linux-wpan/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 linux-wpan linux-wpan/ https://lore.kernel.org/linux-wpan \ firstname.lastname@example.org public-inbox-index linux-wpan Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wpan AGPL code for this site: git clone https://public-inbox.org/public-inbox.git