From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: guaneryu@gmail.com, darrick.wong@oracle.com
Cc: linux-xfs@vger.kernel.org, fstests@vger.kernel.org
Subject: [PATCH 5/5] fsx: support 64-bit operation counts
Date: Tue, 04 Feb 2020 16:02:13 -0800 [thread overview]
Message-ID: <158086093318.1989378.1186256375919220733.stgit@magnolia> (raw)
In-Reply-To: <158086090225.1989378.6869317139530865842.stgit@magnolia>
From: Darrick J. Wong <darrick.wong@oracle.com>
Support 64-bit operation counts so that we can run long-soak tests for
more than 2 billion fsxops.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
ltp/fsx.c | 54 ++++++++++++++++++++++++++++--------------------------
1 file changed, 28 insertions(+), 26 deletions(-)
diff --git a/ltp/fsx.c b/ltp/fsx.c
index 120f4374..02403720 100644
--- a/ltp/fsx.c
+++ b/ltp/fsx.c
@@ -135,12 +135,12 @@ int fd; /* fd for our test file */
blksize_t block_size = 0;
off_t file_size = 0;
off_t biggest = 0;
-unsigned long testcalls = 0; /* calls to function "test" */
+long long testcalls = 0; /* calls to function "test" */
-unsigned long simulatedopcount = 0; /* -b flag */
+long long simulatedopcount = 0; /* -b flag */
int closeprob = 0; /* -c flag */
int debug = 0; /* -d flag */
-unsigned long debugstart = 0; /* -D flag */
+long long debugstart = 0; /* -D flag */
char filldata = 0; /* -g flag */
int flush = 0; /* -f flag */
int do_fsync = 0; /* -y flag */
@@ -148,7 +148,7 @@ unsigned long maxfilelen = 256 * 1024; /* -l flag */
int sizechecks = 1; /* -n flag disables them */
int maxoplen = 64 * 1024; /* -o flag */
int quiet = 0; /* -q flag */
-unsigned long progressinterval = 0; /* -p flag */
+long long progressinterval = 0; /* -p flag */
int readbdy = 1; /* -r flag */
int style = 0; /* -s flag */
int prealloc = 0; /* -x flag */
@@ -157,7 +157,7 @@ int writebdy = 1; /* -w flag */
long monitorstart = -1; /* -m flag */
long monitorend = -1; /* -m flag */
int lite = 0; /* -L flag */
-long numops = -1; /* -N flag */
+long long numops = -1; /* -N flag */
int randomoplen = 1; /* -O flag disables it */
int seed = 1; /* -S flag */
int mapped_writes = 1; /* -W flag disables */
@@ -788,7 +788,7 @@ doread(unsigned offset, unsigned size)
(monitorstart == -1 ||
(offset + size > monitorstart &&
(monitorend == -1 || offset <= monitorend))))))
- prt("%lu read\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
+ prt("%lld read\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
offset, offset + size - 1, size);
ret = lseek(fd, (off_t)offset, SEEK_SET);
if (ret == (off_t)-1) {
@@ -925,7 +925,7 @@ domapread(unsigned offset, unsigned size)
(monitorstart == -1 ||
(offset + size > monitorstart &&
(monitorend == -1 || offset <= monitorend))))))
- prt("%lu mapread\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
+ prt("%lld mapread\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
offset, offset + size - 1, size);
pg_offset = offset & PAGE_MASK;
@@ -1003,7 +1003,7 @@ dowrite(unsigned offset, unsigned size)
(monitorstart == -1 ||
(offset + size > monitorstart &&
(monitorend == -1 || offset <= monitorend))))))
- prt("%lu write\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
+ prt("%lld write\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
offset, offset + size - 1, size);
ret = lseek(fd, (off_t)offset, SEEK_SET);
if (ret == (off_t)-1) {
@@ -1070,7 +1070,7 @@ domapwrite(unsigned offset, unsigned size)
(monitorstart == -1 ||
(offset + size > monitorstart &&
(monitorend == -1 || offset <= monitorend))))))
- prt("%lu mapwrite\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
+ prt("%lld mapwrite\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
offset, offset + size - 1, size);
if (file_size > cur_filesize) {
@@ -1123,11 +1123,12 @@ dotruncate(unsigned size)
if (testcalls <= simulatedopcount)
return;
-
+
if ((progressinterval && testcalls % progressinterval == 0) ||
(debug && (monitorstart == -1 || monitorend == -1 ||
size <= monitorend)))
- prt("%lu trunc\tfrom 0x%x to 0x%x\n", testcalls, oldsize, size);
+ prt("%lld trunc\tfrom 0x%x to 0x%x\n", testcalls, oldsize,
+ size);
if (ftruncate(fd, (off_t)size) == -1) {
prt("ftruncate1: %x\n", size);
prterr("dotruncate: ftruncate");
@@ -1168,7 +1169,7 @@ do_punch_hole(unsigned offset, unsigned length)
if ((progressinterval && testcalls % progressinterval == 0) ||
(debug && (monitorstart == -1 || monitorend == -1 ||
end_offset <= monitorend))) {
- prt("%lu punch\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
+ prt("%lld punch\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
offset, offset+length, length);
}
if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) {
@@ -1230,7 +1231,7 @@ do_zero_range(unsigned offset, unsigned length, int keep_size)
if ((progressinterval && testcalls % progressinterval == 0) ||
(debug && (monitorstart == -1 || monitorend == -1 ||
end_offset <= monitorend))) {
- prt("%lu zero\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
+ prt("%lld zero\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
offset, offset+length, length);
}
if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) {
@@ -1280,8 +1281,8 @@ do_collapse_range(unsigned offset, unsigned length)
if ((progressinterval && testcalls % progressinterval == 0) ||
(debug && (monitorstart == -1 || monitorend == -1 ||
end_offset <= monitorend))) {
- prt("%lu collapse\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
- offset, offset+length, length);
+ prt("%lld collapse\tfrom 0x%x to 0x%x, (0x%x bytes)\n",
+ testcalls, offset, offset+length, length);
}
if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) {
prt("collapse range: 0x%x to 0x%x\n", offset, offset + length);
@@ -1332,7 +1333,7 @@ do_insert_range(unsigned offset, unsigned length)
if ((progressinterval && testcalls % progressinterval == 0) ||
(debug && (monitorstart == -1 || monitorend == -1 ||
end_offset <= monitorend))) {
- prt("%lu insert\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
+ prt("%lld insert\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
offset, offset+length, length);
}
if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) {
@@ -1724,7 +1725,7 @@ do_preallocate(unsigned offset, unsigned length, int keep_size)
if ((progressinterval && testcalls % progressinterval == 0) ||
(debug && (monitorstart == -1 || monitorend == -1 ||
end_offset <= monitorend)))
- prt("%lu falloc\tfrom 0x%x to 0x%x (0x%x bytes)\n", testcalls,
+ prt("%lld falloc\tfrom 0x%x to 0x%x (0x%x bytes)\n", testcalls,
offset, offset + length, length);
if (fallocate(fd, keep_size ? FALLOC_FL_KEEP_SIZE : 0, (loff_t)offset, (loff_t)length) == -1) {
prt("fallocate: 0x%x to 0x%x\n", offset, offset + length);
@@ -1773,7 +1774,7 @@ docloseopen(void)
return;
if (debug)
- prt("%lu close/open\n", testcalls);
+ prt("%lld close/open\n", testcalls);
if (close(fd)) {
prterr("docloseopen: close");
report_failure(180);
@@ -1797,7 +1798,7 @@ dofsync(void)
if (testcalls <= simulatedopcount)
return;
if (debug)
- prt("%lu fsync\n", testcalls);
+ prt("%lld fsync\n", testcalls);
log4(OP_FSYNC, 0, 0, 0);
ret = fsync(fd);
if (ret < 0) {
@@ -1834,7 +1835,7 @@ cleanup(int sig)
{
if (sig)
prt("signal %d\n", sig);
- prt("testcalls = %lu\n", testcalls);
+ prt("testcalls = %lld\n", testcalls);
exit(sig);
}
@@ -1942,7 +1943,7 @@ test(void)
debug = 1;
if (!quiet && testcalls < simulatedopcount && testcalls % 100000 == 0)
- prt("%lu...\n", testcalls);
+ prt("%lld...\n", testcalls);
if (replayopsf) {
struct log_entry log_entry;
@@ -2293,13 +2294,13 @@ usage(void)
}
-int
+long long
getnum(char *s, char **e)
{
- int ret;
+ long long ret;
*e = (char *) 0;
- ret = strtol(s, e, 0);
+ ret = strtoll(s, e, 0);
if (*e)
switch (**e) {
case 'b':
@@ -2487,7 +2488,8 @@ main(int argc, char **argv)
case 'b':
simulatedopcount = getnum(optarg, &endp);
if (!quiet)
- prt("Will begin at operation %ld\n", simulatedopcount);
+ prt("Will begin at operation %lld\n",
+ simulatedopcount);
if (simulatedopcount == 0)
usage();
simulatedopcount -= 1;
@@ -2854,7 +2856,7 @@ main(int argc, char **argv)
prterr("close");
report_failure(99);
}
- prt("All %lu operations completed A-OK!\n", testcalls);
+ prt("All %lld operations completed A-OK!\n", testcalls);
if (recordops)
logdump();
next prev parent reply other threads:[~2020-02-05 0:02 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-05 0:01 [PATCH 0/5] fstests: random fixes Darrick J. Wong
2020-02-05 0:01 ` [PATCH 1/5] xfs/449: filter out "Discarding..." from output Darrick J. Wong
2020-02-06 4:44 ` Zorro Lang
2020-02-05 0:01 ` [PATCH 2/5] xfs/020: fix truncation test Darrick J. Wong
2020-02-06 4:44 ` Zorro Lang
2020-02-05 0:02 ` [PATCH 3/5] generic/402: skip test if xfs_io can't parse the date value Darrick J. Wong
2020-02-05 6:55 ` Amir Goldstein
2020-02-09 15:29 ` Eryu Guan
2020-02-11 15:20 ` Darrick J. Wong
2020-02-05 0:02 ` [PATCH 4/5] xfs/117: fix inode corruption loop Darrick J. Wong
2020-02-06 4:50 ` Zorro Lang
2020-02-05 0:02 ` Darrick J. Wong [this message]
2020-02-06 4:57 ` [PATCH 5/5] fsx: support 64-bit operation counts Zorro Lang
2020-02-06 17:51 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=158086093318.1989378.1186256375919220733.stgit@magnolia \
--to=darrick.wong@oracle.com \
--cc=fstests@vger.kernel.org \
--cc=guaneryu@gmail.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).