linux-xfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dave Chinner <david@fromorbit.com>
To: linux-xfs@vger.kernel.org
Cc: linux-mm@kvack.org, linux-fsdevel@vger.kernel.org
Subject: [PATCH 18/26] xfs: reduce kswapd blocking on inode locking.
Date: Wed,  9 Oct 2019 14:21:16 +1100	[thread overview]
Message-ID: <20191009032124.10541-19-david@fromorbit.com> (raw)
In-Reply-To: <20191009032124.10541-1-david@fromorbit.com>

From: Dave Chinner <dchinner@redhat.com>

When doing async node reclaiming, we grab a batch of inodes that we
are likely able to reclaim and ignore those that are already
flushing. However, when we actually go to reclaim them, the first
thing we do is lock the inode. If we are racing with something
else reclaiming the inode or flushing it because it is dirty,
we block on the inode lock. Hence we can still block kswapd here.

Further, if we flush an inode, we also cluster all the other dirty
inodes in that cluster into the same IO, flush locking them all.
However, if the workload is operating on sequential inodes (e.g.
created by a tarball extraction) most of these inodes will be
sequntial in the cache and so in the same batch
we've already grabbed for reclaim scanning.

As a result, it is common for all the inodes in the batch to be
dirty and it is common for the first inode flushed to also flush all
the inodes in the reclaim batch. In which case, they are now all
going to be flush locked and we do not want to block on them.

Hence, for async reclaim (SYNC_TRYLOCK) make sure we always use
trylock semantics and abort reclaim of an inode as quickly as we can
without blocking kswapd. This will be necessary for the upcoming
conversion to LRU lists for inode reclaim tracking.

Found via tracing and finding big batches of repeated lock/unlock
runs on inodes that we just flushed by write clustering during
reclaim.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
 fs/xfs/xfs_icache.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/fs/xfs/xfs_icache.c b/fs/xfs/xfs_icache.c
index edcc3f6bb3bf..189cf423fe8f 100644
--- a/fs/xfs/xfs_icache.c
+++ b/fs/xfs/xfs_icache.c
@@ -1104,11 +1104,23 @@ xfs_reclaim_inode(
 
 restart:
 	error = 0;
-	xfs_ilock(ip, XFS_ILOCK_EXCL);
-	if (!xfs_iflock_nowait(ip)) {
-		if (!(sync_mode & SYNC_WAIT))
+	/*
+	 * Don't try to flush the inode if another inode in this cluster has
+	 * already flushed it after we did the initial checks in
+	 * xfs_reclaim_inode_grab().
+	 */
+	if (sync_mode & SYNC_TRYLOCK) {
+		if (!xfs_ilock_nowait(ip, XFS_ILOCK_EXCL))
 			goto out;
-		xfs_iflock(ip);
+		if (!xfs_iflock_nowait(ip))
+			goto out_unlock;
+	} else {
+		xfs_ilock(ip, XFS_ILOCK_EXCL);
+		if (!xfs_iflock_nowait(ip)) {
+			if (!(sync_mode & SYNC_WAIT))
+				goto out_unlock;
+			xfs_iflock(ip);
+		}
 	}
 
 	if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
@@ -1215,9 +1227,10 @@ xfs_reclaim_inode(
 
 out_ifunlock:
 	xfs_ifunlock(ip);
+out_unlock:
+	xfs_iunlock(ip, XFS_ILOCK_EXCL);
 out:
 	xfs_iflags_clear(ip, XFS_IRECLAIM);
-	xfs_iunlock(ip, XFS_ILOCK_EXCL);
 	/*
 	 * We could return -EAGAIN here to make reclaim rescan the inode tree in
 	 * a short while. However, this just burns CPU time scanning the tree
-- 
2.23.0.rc1


  parent reply	other threads:[~2019-10-09  3:21 UTC|newest]

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-09  3:20 [PATCH V2 00/26] mm, xfs: non-blocking inode reclaim Dave Chinner
2019-10-09  3:20 ` [PATCH 01/26] xfs: Lower CIL flush limit for large logs Dave Chinner
2019-10-11 12:39   ` Brian Foster
2019-10-30 17:08   ` Darrick J. Wong
2019-10-09  3:21 ` [PATCH 02/26] xfs: Throttle commits on delayed background CIL push Dave Chinner
2019-10-11 12:38   ` Brian Foster
2019-10-09  3:21 ` [PATCH 03/26] xfs: don't allow log IO to be throttled Dave Chinner
2019-10-11  9:35   ` Christoph Hellwig
2019-10-11 12:39   ` Brian Foster
2019-10-30 17:14   ` Darrick J. Wong
2019-10-09  3:21 ` [PATCH 04/26] xfs: Improve metadata buffer reclaim accountability Dave Chinner
2019-10-11 12:39   ` Brian Foster
2019-10-11 12:57     ` Christoph Hellwig
2019-10-11 23:14       ` Dave Chinner
2019-10-11 23:13     ` Dave Chinner
2019-10-12 12:05       ` Brian Foster
2019-10-13  3:14         ` Dave Chinner
2019-10-14 13:05           ` Brian Foster
2019-10-30 17:25   ` Darrick J. Wong
2019-10-30 21:43     ` Dave Chinner
2019-10-31  3:06       ` Darrick J. Wong
2019-10-31 20:50         ` Dave Chinner
2019-10-31 21:05           ` Darrick J. Wong
2019-10-31 21:22             ` Christoph Hellwig
2019-11-03 21:26             ` Dave Chinner
2019-11-04 23:08               ` Darrick J. Wong
2019-10-09  3:21 ` [PATCH 05/26] xfs: correctly acount for reclaimable slabs Dave Chinner
2019-10-11 12:39   ` Brian Foster
2019-10-30 17:16   ` Darrick J. Wong
2019-10-09  3:21 ` [PATCH 06/26] xfs: synchronous AIL pushing Dave Chinner
2019-10-11  9:42   ` Christoph Hellwig
2019-10-11 12:40   ` Brian Foster
2019-10-11 23:15     ` Dave Chinner
2019-10-09  3:21 ` [PATCH 07/26] xfs: tail updates only need to occur when LSN changes Dave Chinner
2019-10-11  9:50   ` Christoph Hellwig
2019-10-11 12:40   ` Brian Foster
2019-10-09  3:21 ` [PATCH 08/26] mm: directed shrinker work deferral Dave Chinner
2019-10-14  8:46   ` Christoph Hellwig
2019-10-14 13:06     ` Brian Foster
2019-10-18  7:59     ` Dave Chinner
2019-10-09  3:21 ` [PATCH 09/26] shrinkers: use defer_work for GFP_NOFS sensitive shrinkers Dave Chinner
2019-10-09  3:21 ` [PATCH 10/26] mm: factor shrinker work calculations Dave Chinner
2019-10-09  3:21 ` [PATCH 11/26] shrinker: defer work only to kswapd Dave Chinner
2019-10-09  3:21 ` [PATCH 12/26] shrinker: clean up variable types and tracepoints Dave Chinner
2019-10-09  3:21 ` [PATCH 13/26] mm: reclaim_state records pages reclaimed, not slabs Dave Chinner
2019-10-09  3:21 ` [PATCH 14/26] mm: back off direct reclaim on excessive shrinker deferral Dave Chinner
2019-10-11 16:21   ` Matthew Wilcox
2019-10-11 23:20     ` Dave Chinner
2019-10-09  3:21 ` [PATCH 15/26] mm: kswapd backoff for shrinkers Dave Chinner
2019-10-09  3:21 ` [PATCH 16/26] xfs: synchronous AIL pushing Dave Chinner
2019-10-11 10:18   ` Christoph Hellwig
2019-10-11 15:29     ` Brian Foster
2019-10-11 23:27       ` Dave Chinner
2019-10-12 12:08         ` Brian Foster
2019-10-09  3:21 ` [PATCH 17/26] xfs: don't block kswapd in inode reclaim Dave Chinner
2019-10-11 15:29   ` Brian Foster
2019-10-09  3:21 ` Dave Chinner [this message]
2019-10-11 10:29   ` [PATCH 18/26] xfs: reduce kswapd blocking on inode locking Christoph Hellwig
2019-10-09  3:21 ` [PATCH 19/26] xfs: kill background reclaim work Dave Chinner
2019-10-11 10:31   ` Christoph Hellwig
2019-10-09  3:21 ` [PATCH 20/26] xfs: use AIL pushing for inode reclaim IO Dave Chinner
2019-10-11 17:38   ` Brian Foster
2019-10-09  3:21 ` [PATCH 21/26] xfs: remove mode from xfs_reclaim_inodes() Dave Chinner
2019-10-11 10:39   ` Christoph Hellwig
2019-10-14 13:07   ` Brian Foster
2019-10-09  3:21 ` [PATCH 22/26] xfs: track reclaimable inodes using a LRU list Dave Chinner
2019-10-11 10:42   ` Christoph Hellwig
2019-10-14 13:07   ` Brian Foster
2019-10-09  3:21 ` [PATCH 23/26] xfs: reclaim inodes from the LRU Dave Chinner
2019-10-11 10:56   ` Christoph Hellwig
2019-10-30 23:25     ` Dave Chinner
2019-10-09  3:21 ` [PATCH 24/26] xfs: remove unusued old inode reclaim code Dave Chinner
2019-10-09  3:21 ` [PATCH 25/26] xfs: rework unreferenced inode lookups Dave Chinner
2019-10-11 12:55   ` Christoph Hellwig
2019-10-11 13:39     ` Peter Zijlstra
2019-10-11 23:38     ` Dave Chinner
2019-10-14 13:07   ` Brian Foster
2019-10-17  1:24     ` Dave Chinner
2019-10-17  7:57       ` Brian Foster
2019-10-18 20:29         ` Dave Chinner
2019-10-09  3:21 ` [PATCH 26/26] xfs: use xfs_ail_push_all_sync in xfs_reclaim_inodes Dave Chinner
2019-10-11  9:55   ` Christoph Hellwig
2019-10-09  7:06 ` [PATCH V2 00/26] mm, xfs: non-blocking inode reclaim Christoph Hellwig
2019-10-11 19:03 ` Josef Bacik
2019-10-11 23:48   ` Dave Chinner
2019-10-12  0:19     ` Josef Bacik
2019-10-12  0:48       ` Dave Chinner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191009032124.10541-19-david@fromorbit.com \
    --to=david@fromorbit.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).