Re: [PATCH 2/2] xfs: test inobtcount upgrade

["Darrick J. Wong" <djwong@kernel.org>]

On Wed, Apr 21, 2021 at 08:52:39AM +0300, Amir Goldstein wrote:
> On Wed, Apr 21, 2021 at 3:23 AM Darrick J. Wong <djwong@kernel.org> wrote:
> >
> > From: Darrick J. Wong <djwong@kernel.org>
> >
> > Make sure we can actually upgrade filesystems to support inode btree
> > counters.
> >
> > Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> > ---
> >  common/xfs        |    8 +++-
> >  tests/xfs/910     |   98 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  tests/xfs/910.out |   23 ++++++++++++
> >  tests/xfs/group   |    1 +
> >  4 files changed, 127 insertions(+), 3 deletions(-)
> >  create mode 100755 tests/xfs/910
> >  create mode 100644 tests/xfs/910.out
> >
> >
> > diff --git a/common/xfs b/common/xfs
> > index 5abc7034..3d660858 100644
> > --- a/common/xfs
> > +++ b/common/xfs
> > @@ -1153,13 +1153,15 @@ _require_xfs_repair_upgrade()
> >                 _notrun "xfs_repair does not support upgrading fs with $type"
> >  }
> >
> > -_require_xfs_scratch_inobtcount()
> > +# Require that the scratch device exists, that mkfs can format with inobtcount
> > +# enabled, and that the kernel can mount such a filesystem.
> > +_require_scratch_xfs_inobtcount()

<groan> I clearly changed the wrong patch in response to reviewer
comments, sorry, will resubmit...

> >  {
> >         _require_scratch
> >
> >         _scratch_mkfs -m inobtcount=1 &> /dev/null || \
> > -               _notrun "mkfs.xfs doesn't have inobtcount feature"
> > +               _notrun "mkfs.xfs doesn't support inobtcount feature"
> >         _try_scratch_mount || \
> > -               _notrun "inobtcount not supported by scratch filesystem type: $FSTYP"
> > +               _notrun "kernel doesn't support xfs inobtcount feature"
> >         _scratch_unmount
> >  }
> > diff --git a/tests/xfs/910 b/tests/xfs/910
> > new file mode 100755
> > index 00000000..237d0a35
> > --- /dev/null
> > +++ b/tests/xfs/910
> > @@ -0,0 +1,98 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> > +#
> > +# FS QA Test No. 910
> > +#
> > +# Check that we can upgrade a filesystem to support inobtcount and that
> > +# everything works properly after the upgrade.
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1    # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > +       cd /
> > +       rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# real QA test starts here
> > +_supported_fs xfs
> > +_require_scratch_xfs_inobtcount
> > +_require_command "$XFS_ADMIN_PROG" "xfs_admin"
> > +_require_xfs_repair_upgrade inobtcount
> > +
> > +rm -f $seqres.full
> > +
> > +# Make sure we can't format a filesystem with inobtcount and not finobt.
> > +_scratch_mkfs -m crc=1,inobtcount=1,finobt=0 &> $seqres.full && \
> > +       echo "Should not be able to format with inobtcount but not finobt."
> > +
> > +# Make sure we can't upgrade a V4 filesystem
> > +_scratch_mkfs -m crc=0,inobtcount=0,finobt=0 >> $seqres.full
> > +_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
> > +_check_scratch_xfs_features INOBTCNT
> > +
> > +# Make sure we can't upgrade a filesystem to inobtcount without finobt.
> > +_scratch_mkfs -m crc=1,inobtcount=0,finobt=0 >> $seqres.full
> > +_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
> > +_check_scratch_xfs_features INOBTCNT
> > +
> > +# Format V5 filesystem without inode btree counter support and populate it.
> > +_scratch_mkfs -m crc=1,inobtcount=0 >> $seqres.full
> > +_scratch_mount
> > +
> > +mkdir $SCRATCH_MNT/stress
> > +$FSSTRESS_PROG -d $SCRATCH_MNT/stress -n 1000 >> $seqres.full
> > +echo moo > $SCRATCH_MNT/urk
> > +
> > +_scratch_unmount
> > +
> > +# Upgrade filesystem to have the counters and inject failure into repair and
> > +# make sure that the only path forward is to re-run repair on the filesystem.
> > +echo "Fail partway through upgrading"
> > +XFS_REPAIR_FAIL_AFTER_PHASE=2 _scratch_xfs_repair -c inobtcount=1 2>> $seqres.full
> > +test $? -eq 137 || echo "repair should have been killed??"
> > +_check_scratch_xfs_features NEEDSREPAIR INOBTCNT
> > +_try_scratch_mount &> $tmp.mount
> > +res=$?
> > +_filter_scratch < $tmp.mount
> > +if [ $res -eq 0 ]; then
> > +       echo "needsrepair should have prevented mount"
> > +       _scratch_unmount
> > +fi
> > +
> > +echo "Re-run repair to finish upgrade"
> > +_scratch_xfs_repair 2>> $seqres.full
> > +_check_scratch_xfs_features NEEDSREPAIR INOBTCNT
> > +
> > +echo "Filesystem should be usable again"
> > +_scratch_mount
> > +$FSSTRESS_PROG -d $SCRATCH_MNT/stress -n 1000 >> $seqres.full
> > +_scratch_unmount
> > +_check_scratch_fs
> > +_check_scratch_xfs_features INOBTCNT
> > +
> > +echo "Make sure we have nonzero counters"
> > +_scratch_xfs_db -c 'agi 0' -c 'print ino_blocks fino_blocks' | \
> > +       sed -e 's/= [1-9]*/= NONZERO/g'
> > +
> 
> I don't think = 100 translates to = NONZERO...

Urk, yes, will fix.

> > +echo "Make sure we can't re-add inobtcount"
> > +_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
> > +
> > +echo "Mount again, look at our files"
> > +_scratch_mount >> $seqres.full
> > +cat $SCRATCH_MNT/urk
> > +
> > +status=0
> > +exit
> > diff --git a/tests/xfs/910.out b/tests/xfs/910.out
> > new file mode 100644
> > index 00000000..1bf040d5
> > --- /dev/null
> > +++ b/tests/xfs/910.out
> > @@ -0,0 +1,23 @@
> > +QA output created by 910
> > +Running xfs_repair to upgrade filesystem.
> > +Inode btree count feature only supported on V5 filesystems.
> > +FEATURES: INOBTCNT:NO
> > +Running xfs_repair to upgrade filesystem.
> > +Inode btree count feature requires free inode btree.
> > +FEATURES: INOBTCNT:NO
> > +Fail partway through upgrading
> > +Adding inode btree counts to filesystem.
> > +FEATURES: NEEDSREPAIR:YES INOBTCNT:YES
> > +mount: SCRATCH_MNT: mount(2) system call failed: Structure needs cleaning.
> > +Re-run repair to finish upgrade
> > +FEATURES: NEEDSREPAIR:NO INOBTCNT:YES
> > +Filesystem should be usable again
> > +FEATURES: INOBTCNT:YES
> > +Make sure we have nonzero counters
> > +ino_blocks = NONZERO
> > +fino_blocks = NONZERO
> > +Make sure we can't re-add inobtcount
> > +Running xfs_repair to upgrade filesystem.
> > +Filesystem already has inode btree counts.
> > +Mount again, look at our files
> > +moo
> 
> This test is quite rigid in the format of messages expected from
> xfs_repair. I suppose there is no precedent here...

<shrug> There /is/ precedent -- if we ever need to change the stdout, we
filter the golden output.

--D

> 
> > diff --git a/tests/xfs/group b/tests/xfs/group
> > index a2309465..bd47333c 100644
> > --- a/tests/xfs/group
> > +++ b/tests/xfs/group
> > @@ -526,3 +526,4 @@
> >  768 auto quick repair
> >  770 auto repair
> >  773 auto quick repair
> > +910 auto quick inobtcount
> >
> +repair?
> 
> Thanks,
> Amir.