From: shrikanth hegde <sshegde@linux.vnet.ibm.com>
To: "Darrick J. Wong" <djwong@kernel.org>
Cc: dchinner@redhat.com, linux-xfs@vger.kernel.org,
Srikar Dronamraju <srikar@linux.vnet.ibm.com>,
ojaswin@linux.ibm.com
Subject: Re: xfs: system fails to boot up due to Internal error xfs_trans_cancel
Date: Sat, 18 Feb 2023 12:47:48 +0530 [thread overview]
Message-ID: <828a1562-3bf4-c1d8-d943-188ee6c3d4fa@linux.vnet.ibm.com> (raw)
In-Reply-To: <Y++xDBwXDgkaFUi9@magnolia>
On 2/17/23 10:23 PM, Darrick J. Wong wrote:
> On Fri, Feb 17, 2023 at 04:45:12PM +0530, shrikanth hegde wrote:
>> We are observing panic on boot upon loading the latest stable tree(v6.2-rc4) in
>> one of our systems. System fails to come up. System was booting well
>> with v5.17, v5.19 kernel. We started seeing this issue when loading v6.0 kernel.
>>
>> Panic Log is below.
>> [ 333.390539] ------------[ cut here ]------------
>> [ 333.390552] WARNING: CPU: 56 PID: 12450 at fs/xfs/xfs_inode.c:1839 xfs_iunlink_lookup+0x58/0x80 [xfs]
>
> Hmm, ok, so this is the same if (WARN_ON_ONCE(!ip || !ip->i_ino)) line
> in xfs_iunlink_lookup that I've been bonking my head on the past
> several days. 333 seconds uptime, so I guess this is a pretty recent
> mount. You didn't post a full dmesg, so I can only assume there weren't
> any *other* obvious complaints from XFS when the fs was mounted...
>
Darrick, Dave. Thank you for taking a look at this. sorry i didnt paste the full log.
Please find the full dmesg below. it was kexec from 5.17-rc2 to 6.2-rc8
Starting Reboot via kexec...
[ 71.134231] printk: systemd-shutdow: 37 output lines suppressed due to ratelimiting
[ 71.158255] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 71.160419] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 71.214007] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 71.233182] systemd-shutdown[1]: Unmounting file systems.
[ 71.233845] [2287]: Remounting '/home' read-only in with options 'attr2,inode64,logbufs=8,logbsize=32k,noquota'.
[ 71.234873] [2288]: Unmounting '/home'.
[ 71.237859] XFS (nvme0n1p1): Unmounting Filesystem
[ 71.524111] [2289]: Remounting '/' read-only in with options 'attr2,inode64,logbufs=8,logbsize=32k,noquota'.
[ 71.810094] systemd-shutdown[1]: All filesystems unmounted.
[ 71.810103] systemd-shutdown[1]: Deactivating swaps.
[ 71.810121] systemd-shutdown[1]: All swaps deactivated. pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/li[ 71.810126] systemd-shutdown[1]: Detaching loop devices.'
[ 71.810227] systemd-shutdown[1]: All loop devices detached.
[ 71.810232] systemd-shutdown[1]: Detaching DM devices.
[ 71.932097] printk: shutdown: 8 output lines suppressed due to ratelimiting
[ 71.954484] dracut Warning: Killing all remaining processes
dracut Warning: Killing all remaining processes
[ 72.001360] XFS (dm-0): Unmounting Filesystem
[ 72.393816] dracut Warning: Unmounted /oldroot.
[ 72.409893] dracut: Disassembling device-mapper devices
[ 72.527853] Removing IBM Power 842 compression device
[ 78.084038] kexec_core: Starting new kernel
[ 78.104094] kexec: waiting for cpu 26 (physical 26) to enter 1 state
[ 78.104102] kexec: waiting for cpu 87 (physical 87) to enter 1 state
[ 78.104109] kexec: waiting for cpu 1 (physical 1) to enter 2 state
[ 78.104248] kexec: waiting for cpu 2 (physical 2) to enter 2 state
[ 78.104275] kexec: waiting for cpu 3 (physical 3) to enter 2 state
[ 78.104289] kexec: waiting for cpu 4 (physical 4) to enter 2 state
[ 78.104303] kexec: waiting for cpu 5 (physical 5) to enter 2 state
[ 78.104315] kexec: waiting for cpu 8 (physical 8) to enter 2 state
[ 78.104352] kexec: waiting for cpu 48 (physical 48) to enter 2 state
[ 78.104357] kexec: waiting for cpu 49 (physical 49) to enter 2 state
[ 78.278072] kexec: Starting switchover sequence.
I'm in purgatory
[ 0.000000] radix-mmu: Page sizes from device-tree:
[ 0.000000] radix-mmu: Page size shift = 12 AP=0x0
[ 0.000000] radix-mmu: Page size shift = 16 AP=0x5
[ 0.000000] radix-mmu: Page size shift = 21 AP=0x1
[ 0.000000] radix-mmu: Page size shift = 30 AP=0x2
[ 0.000000] Activating Kernel Userspace Access Prevention
[ 0.000000] Activating Kernel Userspace Execution Prevention
[ 0.000000] radix-mmu: Mapped 0x0000000000000000-0x0000000002600000 with 2.00 MiB pages (exec)
[ 0.000000] radix-mmu: Mapped 0x0000000002600000-0x0000004b00000000 with 2.00 MiB pages
[ 0.000000] lpar: Using radix MMU under hypervisor
[ 0.000000] Linux version 6.2.0-rc8ssh (root@ltcden3-lp1.aus.stglabs.ibm.com) (gcc (GCC) 8.5.0 20210514 (Red Hat 8.5.0-10), GNU ld version 2.30-113.el8) #35 SMP Sat Feb 18 00:41:56 EST 2023
[ 0.000000] Found initrd at 0xc0000000061d0000:0xc00000000ac38d3b
[ 0.000000] Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1010.22 (NH1010_122) hv:phyp pSeries
[ 0.000000] printk: bootconsole [udbg0] enabled
[ 0.000000] Partition configured for 96 cpus.
[ 0.000000] CPU maps initialized for 8 threads per core
[ 0.000000] numa: Partition configured for 32 NUMA nodes.
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x4b00000000
[ 0.000000] dcache_bsize = 0x80
[ 0.000000] icache_bsize = 0x80
[ 0.000000] cpu_features = 0x000c00eb8f5f9187
[ 0.000000] possible = 0x000ffbfbcf5fb187
[ 0.000000] always = 0x0000000380008181
[ 0.000000] cpu_user_features = 0xdc0065c2 0xaef60000
[ 0.000000] mmu_features = 0xbc007641
[ 0.000000] firmware_features = 0x000005bfc55bfc57
[ 0.000000] vmalloc start = 0xc008000000000000
[ 0.000000] IO start = 0xc00a000000000000
[ 0.000000] vmemmap start = 0xc00c000000000000
[ 0.000000] -----------------------------------------------------
[ 0.000000] numa: NODE_DATA [mem 0x4afe663780-0x4afe66aeff]
[ 0.000000] rfi-flush: fallback displacement flush available
[ 0.000000] count-cache-flush: hardware flush enabled.
[ 0.000000] link-stack-flush: software flush enabled.
[ 0.000000] stf-barrier: eieio barrier available
[ 0.000000] PPC64 nvram contains 15360 bytes
[ 0.000000] barrier-nospec: using ORI speculation barrier
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000004affffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 2: [mem 0x0000000000000000-0x0000004affffffff]
[ 0.000000] Initializing node 0 as memoryless
[ 0.000000] Initmem setup node 0 as memoryless
[ 0.000000] Initializing node 1 as memoryless
[ 0.000000] Initmem setup node 1 as memoryless
[ 0.000000] Initmem setup node 2 [mem 0x0000000000000000-0x0000004affffffff]
[ 0.000000] Initializing node 3 as memoryless
[ 0.000000] Initmem setup node 3 as memoryless
[ 0.000000] Initializing node 4 as memoryless
[ 0.000000] Initmem setup node 4 as memoryless
[ 0.000000] Initializing node 5 as memoryless
[ 0.000000] Initmem setup node 5 as memoryless
[ 0.000000] Initializing node 6 as memoryless
[ 0.000000] Initmem setup node 6 as memoryless
[ 0.000000] Initializing node 7 as memoryless
[ 0.000000] Initmem setup node 7 as memoryless
[ 0.000000] Initializing node 8 as memoryless
[ 0.000000] Initmem setup node 8 as memoryless
[ 0.000000] Initializing node 9 as memoryless
[ 0.000000] Initmem setup node 9 as memoryless
[ 0.000000] Initializing node 10 as memoryless
[ 0.000000] Initmem setup node 10 as memoryless
[ 0.000000] Initializing node 11 as memoryless
[ 0.000000] Initmem setup node 11 as memoryless
[ 0.000000] Initializing node 12 as memoryless
[ 0.000000] Initmem setup node 12 as memoryless
[ 0.000000] Initializing node 13 as memoryless
[ 0.000000] Initmem setup node 13 as memoryless
[ 0.000000] Initializing node 14 as memoryless
[ 0.000000] Initmem setup node 14 as memoryless
[ 0.000000] Initializing node 15 as memoryless
[ 0.000000] Initmem setup node 15 as memoryless
[ 0.000000] Initializing node 16 as memoryless
[ 0.000000] Initmem setup node 16 as memoryless
[ 0.000000] Initializing node 17 as memoryless
[ 0.000000] Initmem setup node 17 as memoryless
[ 0.000000] Initializing node 18 as memoryless
[ 0.000000] Initmem setup node 18 as memoryless
[ 0.000000] Initializing node 19 as memoryless
[ 0.000000] Initmem setup node 19 as memoryless
[ 0.000000] Initializing node 20 as memoryless
[ 0.000000] Initmem setup node 20 as memoryless
[ 0.000000] Initializing node 21 as memoryless
[ 0.000000] Initmem setup node 21 as memoryless
[ 0.000000] Initializing node 22 as memoryless
[ 0.000000] Initmem setup node 22 as memoryless
[ 0.000000] Initializing node 23 as memoryless
[ 0.000000] Initmem setup node 23 as memoryless
[ 0.000000] Initializing node 24 as memoryless
[ 0.000000] Initmem setup node 24 as memoryless
[ 0.000000] Initializing node 25 as memoryless
[ 0.000000] Initmem setup node 25 as memoryless
[ 0.000000] Initializing node 26 as memoryless
[ 0.000000] Initmem setup node 26 as memoryless
[ 0.000000] Initializing node 27 as memoryless
[ 0.000000] Initmem setup node 27 as memoryless
[ 0.000000] Initializing node 28 as memoryless
[ 0.000000] Initmem setup node 28 as memoryless
[ 0.000000] Initializing node 29 as memoryless
[ 0.000000] Initmem setup node 29 as memoryless
[ 0.000000] Initializing node 30 as memoryless
[ 0.000000] Initmem setup node 30 as memoryless
[ 0.000000] Initializing node 31 as memoryless
[ 0.000000] Initmem setup node 31 as memoryless
[ 0.000000] percpu: Embedded 10 pages/cpu s601512 r0 d53848 u655360
[ 0.000000] Fallback order for Node 0: 0 2
[ 0.000000] Fallback order for Node 1: 1 2
[ 0.000000] Fallback order for Node 2: 2
[ 0.000000] Fallback order for Node 3: 3 2
[ 0.000000] Fallback order for Node 4: 4 2
[ 0.000000] Fallback order for Node 5: 5 2
[ 0.000000] Fallback order for Node 6: 6 2
[ 0.000000] Fallback order for Node 7: 7 2
[ 0.000000] Fallback order for Node 8: 8 2
[ 0.000000] Fallback order for Node 9: 9 2
[ 0.000000] Fallback order for Node 10: 10 2
[ 0.000000] Fallback order for Node 11: 11 2
[ 0.000000] Fallback order for Node 12: 12 2
[ 0.000000] Fallback order for Node 13: 13 2
[ 0.000000] Fallback order for Node 14: 14 2
[ 0.000000] Fallback order for Node 15: 15 2
[ 0.000000] Fallback order for Node 16: 16 2
[ 0.000000] Fallback order for Node 17: 17 2
[ 0.000000] Fallback order for Node 18: 18 2
[ 0.000000] Fallback order for Node 19: 19 2
[ 0.000000] Fallback order for Node 20: 20 2
[ 0.000000] Fallback order for Node 21: 21 2
[ 0.000000] Fallback order for Node 22: 22 2
[ 0.000000] Fallback order for Node 23: 23 2
[ 0.000000] Fallback order for Node 24: 24 2
[ 0.000000] Fallback order for Node 25: 25 2
[ 0.000000] Fallback order for Node 26: 26 2
[ 0.000000] Fallback order for Node 27: 27 2
[ 0.000000] Fallback order for Node 28: 28 2
[ 0.000000] Fallback order for Node 29: 29 2
[ 0.000000] Fallback order for Node 30: 30 2
[ 0.000000] Fallback order for Node 31: 31 2
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4910400
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/rhel_ltcden3--lp1-root
[ 0.000000] random: crng init done
[ 0.000000] Dentry cache hash table entries: 16777216 (order: 11, 134217728 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8388608 (order: 10, 67108864 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 313817216K/314572800K available (15168K kernel code, 5632K rwdata, 17600K rodata, 5440K init, 2721K bss, 755584K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=96, Nodes=32
[ 0.000000] ftrace: allocating 38156 entries in 14 pages
[ 0.000000] ftrace: allocated 14 pages with 3 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=96.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=96
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] xive: Using IRQ range [400000-40005f]
[ 0.000000] xive: Interrupt handling initialized with spapr backend
[ 0.000000] xive: Using priority 7 for all interrupts
[ 0.000000] xive: Using 64kB queues
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000001] time_init: 56 bit decrementer (max: 7fffffffffffff)
[ 0.000021] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns
[ 0.000055] clocksource: timebase mult[1f40000] shift[24] registered
[ 0.000233] Console: colour dummy device 80x25
[ 0.000252] printk: console [hvc0] enabled
[ 0.000252] printk: console [hvc0] enabled
[ 0.000269] printk: bootconsole [udbg0] disabled
[ 0.000269] printk: bootconsole [udbg0] disabled
[ 0.000360] pid_max: default: 98304 minimum: 768
[ 0.000481] LSM: initializing lsm=capability,yama,integrity,selinux,bpf
[ 0.000550] Yama: becoming mindful.
[ 0.000565] SELinux: Initializing.
[ 0.000568] SELinux: CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE is non-zero. This is deprecated and will be rejected in a future kernel release.
[ 0.000573] SELinux: https://github.com/SELinuxProject/selinux-kernel/wiki/DEPRECATE-checkreqprot
[ 0.000747] LSM support for eBPF active
[ 0.000929] Mount-cache hash table entries: 262144 (order: 5, 2097152 bytes, linear)
[ 0.001056] Mountpoint-cache hash table entries: 262144 (order: 5, 2097152 bytes, linear)
[ 0.003430] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.003454] cblist_init_generic: Setting shift to 7 and lim to 1.
[ 0.003486] cblist_init_generic: Setting shift to 7 and lim to 1.
[ 0.003507] POWER10 performance monitor hardware support registered
[ 0.003537] rcu: Hierarchical SRCU implementation.
[ 0.003540] rcu: Max phase no-delay instances is 1000.
[ 0.004445] smp: Bringing up secondary CPUs ...
[ 0.022208] smp: Brought up 1 node, 96 CPUs
[ 0.022218] numa: Node 2 CPUs: 0-95
[ 0.022222] Big cores detected but using small core scheduling
[ 0.033289] devtmpfs: initialized
[ 0.042965] PCI host bridge /pci@800000020000019 ranges:
[ 0.042984] MEM 0x0000040080000000..0x00000400feffffff -> 0x0000000080000000
[ 0.042988] MEM 0x0000044000000000..0x0000047fffffffff -> 0x0006204000000000
[ 0.043060] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.043066] futex hash table entries: 32768 (order: 6, 4194304 bytes, linear)
[ 0.043643] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.043801] audit: initializing netlink subsys (disabled)
[ 0.043903] audit: type=2000 audit(1676701683.040:1): state=initialized audit_enabled=0 res=1
[ 0.043954] thermal_sys: Registered thermal governor 'fair_share'
[ 0.043955] thermal_sys: Registered thermal governor 'step_wise'
[ 0.044007] cpuidle: using governor menu
[ 0.044306] pstore: Registered nvram as persistent store backend
[ 0.044682] EEH: pSeries platform initialized
[ 0.055324] PCI: Probing PCI hardware
[ 0.055372] PCI host bridge to bus 0019:01
[ 0.055376] pci_bus 0019:01: root bus resource [mem 0x40080000000-0x400feffffff] (bus address [0x80000000-0xfeffffff])
[ 0.055381] pci_bus 0019:01: root bus resource [mem 0x44000000000-0x47fffffffff 64bit] (bus address [0x6204000000000-0x6207fffffffff])
[ 0.055386] pci_bus 0019:01: root bus resource [bus 01-ff]
[ 0.056001] pci 0019:01:00.0: No hypervisor support for SR-IOV on this device, IOV BARs disabled.
[ 0.064978] IOMMU table initialized, virtual merging enabled
[ 0.065086] pci 0019:01:00.0: Adding to iommu group 0
[ 0.066308] EEH: Capable adapter found: recovery enabled.
[ 0.066550] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.066812] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.066817] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.066821] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.066824] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.085068] cryptd: max_cpu_qlen set to 1000
[ 0.085368] iommu: Default domain type: Translated
[ 0.085371] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.085491] SCSI subsystem initialized
[ 0.085517] usbcore: registered new interface driver usbfs
[ 0.085523] usbcore: registered new interface driver hub
[ 0.085542] usbcore: registered new device driver usb
[ 0.085563] pps_core: LinuxPPS API ver. 1 registered
[ 0.085565] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.085569] PTP clock support registered
[ 0.085628] EDAC MC: Ver: 3.0.0
[ 0.085885] NetLabel: Initializing
[ 0.085887] NetLabel: domain hash size = 128
[ 0.085889] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.085903] NetLabel: unlabeled traffic allowed by default
[ 0.085956] vgaarb: loaded
[ 0.086157] clocksource: Switched to clocksource timebase
[ 0.086451] VFS: Disk quotas dquot_6.6.0
[ 0.086480] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
[ 0.088080] NET: Registered PF_INET protocol family
[ 0.088237] IP idents hash table entries: 262144 (order: 5, 2097152 bytes, linear)
[ 0.091345] tcp_listen_portaddr_hash hash table entries: 65536 (order: 4, 1048576 bytes, linear)
[ 0.091454] Table-perturb hash table entries: 65536 (order: 2, 262144 bytes, linear)
[ 0.091480] TCP established hash table entries: 524288 (order: 6, 4194304 bytes, linear)
[ 0.092201] TCP bind hash table entries: 65536 (order: 5, 2097152 bytes, linear)
[ 0.092386] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.092708] MPTCP token hash table entries: 65536 (order: 4, 1572864 bytes, linear)
[ 0.092826] UDP hash table entries: 65536 (order: 5, 2097152 bytes, linear)
[ 0.093046] UDP-Lite hash table entries: 65536 (order: 5, 2097152 bytes, linear)
[ 0.093402] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.093413] NET: Registered PF_XDP protocol family
[ 0.093509] PCI: CLS 128 bytes, default 128
[ 0.093638] Unpacking initramfs...
[ 0.094862] vio_register_device_node: node lid missing 'reg'
[ 0.103665] vas: GZIP feature is available
[ 0.104512] hv-24x7: read 548 catalog entries, created 387 event attrs (0 failures), 387 descs
[ 0.108478] Initialise system trusted keyrings
[ 0.108493] Key type blacklist registered
[ 0.108560] workingset: timestamp_bits=38 max_order=23 bucket_order=0
[ 0.108587] zbud: loaded
[ 0.108988] integrity: Platform Keyring initialized
[ 0.119068] NET: Registered PF_ALG protocol family
[ 0.119083] Key type asymmetric registered
[ 0.119086] Asymmetric key parser 'x509' registered
[ 0.119120] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.119182] io scheduler mq-deadline registered
[ 0.119185] io scheduler kyber registered
[ 0.119198] io scheduler bfq registered
[ 0.120970] atomic64_test: passed
[ 0.121210] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.121214] PowerPC PowerNV PCI Hotplug Driver version: 0.1
[ 0.121532] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.121728] Non-volatile memory driver v1.3
[ 0.122174] rdac: device handler registered
[ 0.122215] hp_sw: device handler registered
[ 0.122218] emc: device handler registered
[ 0.122260] alua: device handler registered
[ 0.122450] usbcore: registered new interface driver usbserial_generic
[ 0.122457] usbserial: USB Serial support registered for generic
[ 0.122529] mousedev: PS/2 mouse device common for all mice
[ 0.122644] rtc-generic rtc-generic: registered as rtc0
[ 0.122676] rtc-generic rtc-generic: setting system clock to 2023-02-18T06:28:03 UTC (1676701683)
[ 0.122755] xcede: xcede_record_size = 10
[ 0.122758] xcede: Record 0 : hint = 1, latency = 0x1800 tb ticks, Wake-on-irq = 1
[ 0.122765] xcede: Record 1 : hint = 2, latency = 0x3c00 tb ticks, Wake-on-irq = 0
[ 0.122769] cpuidle: Skipping the 2 Extended CEDE idle states
[ 0.122771] cpuidle: Fixed up CEDE exit latency to 12 us
[ 0.123865] nx_compress_pseries ibm,compression-v1: nx842_OF_upd: max_sync_size new:65536 old:0
[ 0.123871] nx_compress_pseries ibm,compression-v1: nx842_OF_upd: max_sync_sg new:510 old:0
[ 0.123875] nx_compress_pseries ibm,compression-v1: nx842_OF_upd: max_sg_len new:4080 old:0
[ 0.124018] hid: raw HID events driver (C) Jiri Kosina
[ 0.124042] usbcore: registered new interface driver usbhid
[ 0.124048] usbhid: USB HID core driver
[ 0.124069] drop_monitor: Initializing network drop monitor service
[ 0.134168] Initializing XFRM netlink socket
[ 0.134234] NET: Registered PF_INET6 protocol family
[ 0.134747] Segment Routing with IPv6
[ 0.134756] In-situ OAM (IOAM) with IPv6
[ 0.134776] NET: Registered PF_PACKET protocol family
[ 0.134817] mpls_gso: MPLS GSO support
[ 0.134836] secvar-sysfs: secvar: failed to retrieve secvar operations.
[ 0.139134] registered taskstats version 1
[ 0.140964] Loading compiled-in X.509 certificates
[ 0.156881] Loaded X.509 cert 'Build time autogenerated kernel key: 7b04a1cdeda81c05f7a701657946db5548da6201'
[ 0.157494] zswap: loaded using pool lzo/zbud
[ 0.160050] page_owner is disabled
[ 0.160226] pstore: Using crash dump compression: deflate
[ 0.972073] Freeing initrd memory: 76160K
[ 0.974020] Key type encrypted registered
[ 0.974056] Secure boot mode disabled
[ 0.974060] ima: No TPM chip found, activating TPM-bypass!
[ 0.974067] Loading compiled-in module X.509 certificates
[ 0.974567] Loaded X.509 cert 'Build time autogenerated kernel key: 7b04a1cdeda81c05f7a701657946db5548da6201'
[ 0.974571] ima: Allocated hash algorithm: sha256
[ 0.974598] Secure boot mode disabled
[ 0.974615] Trusted boot mode disabled
[ 0.974617] ima: No architecture policies found
[ 0.974629] evm: Initialising EVM extended attributes:
[ 0.974631] evm: security.selinux
[ 0.974633] evm: security.SMACK64 (disabled)
[ 0.974635] evm: security.SMACK64EXEC (disabled)
[ 0.974637] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.974639] evm: security.SMACK64MMAP (disabled)
[ 0.974641] evm: security.apparmor (disabled)
[ 0.974642] evm: security.ima
[ 0.974644] evm: security.capability
[ 0.974646] evm: HMAC attrs: 0x1
[ 0.974676] alg: No test for 842 (842-nx)
[ 0.982519] Freeing unused kernel image (initmem) memory: 5440K
[ 1.086157] Run /init as init process
[ 1.092664] systemd[1]: systemd 239 (239-58.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
[ 1.092708] systemd[1]: Detected virtualization powervm.
[ 1.092714] systemd[1]: Detected architecture ppc64-le.
[ 1.092718] systemd[1]: Running in initial RAM disk.
Welcome to Red Hat Enterprise Linux 8.6 (Ootpa) dracut-049-201.git20220131.el8 (Initramfs)!
[ 1.246394] systemd[1]: Set hostname to <ltcden3-lp1.aus.stglabs.ibm.com>.
[ 1.321102] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 1.322421] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
[ 1.323252] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required st…ce nodes for the current kernel...
[ 1.323333] systemd[1]: Reached target Local File Systems.
[ OK ] Reached target Local File Systems.
[ 1.324085] systemd[1]: Started Memstrack Anylazing Service.
[ OK ] Started Memstrack Anylazing Service.
[ OK ] Reached target Slices.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on Journal Socket (/dev/log).
Starting Journal Service...
Starting Create Volatile Files and Directories...
[ OK ] Reached target Swap.
[ OK ] Reached target Timers.
Starting Setup Virtual Console...
Starting Load Kernel Modules...
[ OK ] Listening on udev Control Socket.
[ OK ] Reached target Sockets.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
[ OK ] Started Create Volatile Files and Directories.
Starting Create Static Device Nodes in /dev...
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
Starting Apply Kernel Variables...
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Journal Service.
[ OK ] Started Setup Virtual Console.
Starting dracut cmdline hook...
[ OK ] Started dracut cmdline hook.
Starting dracut pre-udev hook...
[ 1.477216] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 1.477252] device-mapper: uevent: version 1.0.3
[ 1.477339] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ OK ] Started dracut pre-udev hook.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
Starting udev Coldplug all Devices...
Mounting Kernel Configuration File System...
[ OK ] Mounted Kernel Configuration File System.
[ 1.651355] synth uevent: /devices/vio: failed to send uevent
[ 1.651365] vio vio: uevent: failed to send synthetic uevent: -19
[ 1.651402] synth uevent: /devices/vio/4000: failed to send uevent
[ 1.651406] vio 4000: uevent: failed to send synthetic uevent: -19
[ 1.651415] synth uevent: /devices/vio/4001: failed to send uevent
[ 1.651418] vio 4001: uevent: failed to send synthetic uevent: -19
[ 1.651428] synth uevent: /devices/vio/4002: failed to send uevent
[ 1.651431] vio 4002: uevent: failed to send synthetic uevent: -19
[ 1.651441] synth uevent: /devices/vio/4004: failed to send uevent
[ 1.651444] vio 4004: uevent: failed to send synthetic uevent: -19
[ OK ] Started udev Coldplug all Devices.
[ OK ] Reached target System Initialization.
Starting Show Plymouth Boot Screen...
Starting dracut initqueue hook...
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Started Forward Password Requests to Plymouth Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Reached target Basic System.
[ 1.709851] ibmveth 30000002 net0: renamed from eth0
[ 1.712196] nvme nvme0: pci function 0019:01:00.0
[ 1.714161] ibmvscsi 30000065: SRP_VERSION: 16.a
[ 1.714223] ibmvscsi 30000065: Maximum ID: 64 Maximum LUN: 32 Maximum Channel: 3
[ 1.714227] scsi host0: IBM POWER Virtual SCSI Adapter 1.5.9
[ 1.714365] ibmvscsi 30000065: partner initialization complete
[ 1.714391] ibmvscsi 30000065: host srp version: 16.a, host partition ltcden3-vios1 (100), OS 3, max io 524288
[ 1.714421] ibmvscsi 30000065: Client reserve enabled
[ 1.714426] ibmvscsi 30000065: sent SRP login
[ 1.714448] ibmvscsi 30000065: SRP_LOGIN succeeded
[ 1.721611] nvme nvme0: Shutdown timeout set to 8 seconds
[ 1.737117] scsi 0:0:1:0: Direct-Access AIX VDASD 0001 PQ: 0 ANSI: 3
[ 1.738038] scsi 0:0:2:0: Direct-Access AIX VDASD 0001 PQ: 0 ANSI: 3
[ 1.738364] scsi 0:0:3:0: Direct-Access AIX VDASD 0001 PQ: 0 ANSI: 3
[ 1.750754] nvme nvme0: 32/0/0 default/read/poll queues
[ 1.754482] nvme0n1: p1 p2 p3
[ 1.772868] scsi 0:0:1:0: Attached scsi generic sg0 type 0
[ 1.772898] scsi 0:0:2:0: Attached scsi generic sg1 type 0
[ 1.772920] scsi 0:0:3:0: Attached scsi generic sg2 type 0
[ 1.794722] sd 0:0:2:0: [sda] 629145600 512-byte logical blocks: (322 GB/300 GiB)
[ 1.794757] sd 0:0:2:0: [sda] Write Protect is off
[ 1.794758] sd 0:0:1:0: [sdb] 209715200 512-byte logical blocks: (107 GB/100 GiB)
[ 1.794790] sd 0:0:2:0: [sda] Cache data unavailable
[ 1.794792] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.794796] sd 0:0:2:0: [sda] Assuming drive cache: write through
[ 1.794826] sd 0:0:1:0: [sdb] Cache data unavailable
[ 1.794829] sd 0:0:1:0: [sdb] Assuming drive cache: write through
[ 1.794943] sd 0:0:3:0: [sdc] 91750400 4096-byte logical blocks: (376 GB/350 GiB)
[ 1.794979] sd 0:0:3:0: [sdc] Write Protect is off
[ 1.795008] sd 0:0:3:0: [sdc] Cache data unavailable
[ 1.795011] sd 0:0:3:0: [sdc] Assuming drive cache: write through
[ 1.796625] sdb: sdb1 sdb2 sdb3
[ 1.796717] sdc: sdc1
[ 1.796720] sda: sda1 sda2
[ 1.796752] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.796820] sd 0:0:3:0: [sdc] Attached SCSI disk
[ 1.796841] sd 0:0:2:0: [sda] Attached SCSI disk
[ OK ] Found device /dev/mapper/rhel_ltcden3--lp1-root.
[ OK ] Reached target Initrd Root Device.
[ OK ] Started dracut initqueue hook.
Starting File System Check on /dev/mapper/rhel_ltcden3--lp1-root...
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
[ OK ] Started File System Check on /dev/mapper/rhel_ltcden3--lp1-root.
Mounting /sysroot...
[ 3.060638] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 3.062369] XFS (dm-0): Mounting V5 Filesystem 7b801289-75a7-4d39-8cd3-24526e9e9da7
[ 3.109076] XFS (dm-0): Ending clean mount
[ OK ] Mounted /sysroot.
[ OK ] Reached target Initrd Root File System.
Starting Reload Configuration from the Real Root...
[ OK ] Started Reload Configuration from the Real Root.
[ OK ] Reached target Initrd File Systems.
[ OK ] Reached target Initrd Default Target.
Starting dracut pre-pivot and cleanup hook...
[ OK ] Started dracut pre-pivot and cleanup hook.
Starting Cleaning Up and Shutting Down Daemons...
[ OK ] Stopped dracut pre-pivot and cleanup hook.
[ OK ] Stopped target Remote File Systems.
[ OK ] Stopped target Initrd Default Target.
[ OK ] Stopped target Timers.
[ OK ] Stopped target Initrd Root Device.
[ OK ] Stopped target Remote File Systems (Pre).
[ OK ] Stopped dracut initqueue hook.
Starting Setup Virtual Console...
[ OK ] Stopped target Basic System.
[ OK ] Stopped target System Initialization.
[ OK ] Stopped Create Volatile Files and Directories.
[ OK ] Stopped Apply Kernel Variables.
[ OK ] Stopped udev Coldplug all Devices.
Stopping udev Kernel Device Manager...
[ OK ] Stopped target Swap.
[ OK ] Stopped target Paths.
[ OK ] Stopped target Sockets.
[ OK ] Stopped target Slices.
Starting Plymouth switch root service...
[ OK ] Stopped target Local File Systems.
[ OK ] Started Cleaning Up and Shutting Down Daemons.
[ OK ] Started Plymouth switch root service.
[ OK ] Started Setup Virtual Console.
[ OK ] Stopped udev Kernel Device Manager.
[ OK ] Stopped Create Static Device Nodes in /dev.
[ OK ] Stopped Create list of required sta…vice nodes for the current kernel.
Stopping Hardware RNG Entropy Gatherer Daemon...
[ OK ] Stopped dracut pre-udev hook.
[ OK ] Stopped dracut cmdline hook.
[ OK ] Closed udev Control Socket.
[ OK ] Closed udev Kernel Socket.
Starting Cleanup udevd DB...
[ OK ] Stopped Hardware RNG Entropy Gatherer Daemon.
[ OK ] Started Cleanup udevd DB.
[ OK ] Reached target Switch Root.
Starting Switch Root...
[ 3.449370] printk: systemd: 22 output lines suppressed due to ratelimiting
[ 3.593463] SELinux: Runtime disable is deprecated, use selinux=0 on the kernel cmdline.
[ 3.593471] SELinux: https://github.com/SELinuxProject/selinux-kernel/wiki/DEPRECATE-runtime-disable
[ 19.036134] SELinux: Disabled at runtime.
[ 19.196154] audit: type=1404 audit(1676701702.570:2): enforcing=0 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=0 old-enabled=1 lsm=selinux res=1
[ 19.201608] systemd[1]: systemd 239 (239-58.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
[ 19.201637] systemd[1]: Detected virtualization powervm.
[ 19.201642] systemd[1]: Detected architecture ppc64-le.
Welcome to Red Hat Enterprise Linux 8.6 (Ootpa)!
[ 19.202637] systemd[1]: Set hostname to <ltcden3-lp1.aus.stglabs.ibm.com>.
[ 21.777702] systemd[1]: systemd-journald.service: Succeeded.
[ 21.778191] systemd[1]: initrd-switch-root.service: Succeeded.
[ 21.778387] systemd[1]: Stopped Switch Root.
[ OK ] Stopped Switch Root.
[ 21.778748] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
[ 21.778795] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 21.778847] systemd[1]: Stopped Journal Service.
[ OK ] Stopped Journal Service.
Starting Journal Service...
[ OK ] Stopped Plymouth switch root service.
[ OK ] Stopped target Switch Root.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on Process Core Dump Socket.
Mounting Huge Pages File System...
Starting Load Kernel Modules...
Starting Read and set NIS domainname from /etc/sysconfig/network...
Activating swap /dev/mapper/rhel_ltcden3--lp1-swap...
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-getty.slice.
Starting Create list of required st…ce nodes for the current kernel...
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Slices.
[ OK ] Listening on RPCbind Server Activation Socket.
[ OK ] Reached target RPC Port Mapper.
Mounting POSIX Message Queue File System...
[ OK ] Stopped File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Reached target Local Encrypted Volumes.
[ 21.912238] Adding 4194240k swap on /dev/mapper/rhel_ltcden3--lp1-swap. Priority:-2 extents:1 across:4194240k FS
[ OK ] Listening on Device-mapper event daemon FIFOs.
Starting Monitoring of LVM2 mirrors…ng dmeventd or progress polling...
Starting Setup Virtual Console...
[ OK ] Stopped target Initrd Root File System.
Mounting Kernel Debug File System...
[ OK ] Listening on udev Control Socket.
Starting udev Coldplug all Devices...
[ OK ] Created slice system-sshd\x2dkeygen.slice.
[ OK ] Stopped target Initrd File Systems.
[ OK ] Listening on LVM2 poll daemon socket.
[ OK ] Activated swap /dev/mapper/rhel_ltcden3--lp1-swap.
[ OK ] Mounted Huge Pages File System.
[ OK ] Started Read and set NIS domainname from /etc/sysconfig/network.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
[ OK ] Started Journal Service.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Reached target Swap.
[ 22.217261] xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff)
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Monitoring of LVM2 mirrors,…sing dmeventd or progress polling.
Starting Create Static Device Nodes in /dev...
Starting Load/Save Random Seed...
Starting Flush Journal to Persistent Storage...
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
Starting Apply Kernel Variables...
[ 22.341308] synth uevent: /devices/vio: failed to send uevent
[ 22.341317] vio vio: uevent: failed to send synthetic uevent: -19
[ 22.341597] synth uevent: /devices/vio/4000: failed to send uevent
[ 22.341600] vio 4000: uevent: failed to send synthetic uevent: -19
[ 22.341610] synth uevent: /devices/vio/4001: failed to send uevent
[ 22.341613] vio 4001: uevent: failed to send synthetic uevent: -19
[ 22.341622] synth uevent: /devices/vio/4002: failed to send uevent
[ 22.341625] vio 4002: uevent: failed to send synthetic uevent: -19
[ 22.341633] synth uevent: /devices/vio/4004: failed to send uevent
[ 22.341636] vio 4004: uevent: failed to send synthetic uevent: -19
[ OK ] Started udev Coldplug all Devices.
Starting udev Wait for Complete Device Initialization...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started Setup Virtual Console.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
[ 24.100485] pseries_rng: Registering IBM pSeries RNG driver
[ OK ] Created slice system-lvm2\x2dpvscan.slice.
Starting LVM event activation on device 8:19...
[ OK ] Started LVM event activation on device 8:19.
[ OK ] Started udev Wait for Complete Device Initialization.
[ OK ] Reached target Local File Systems (Pre).
Mounting /home...
Mounting /home2...
Mounting /boot...
[ 25.049055] XFS (nvme0n1p1): Mounting V5 Filesystem 31458cd5-8eb4-48b4-8f5a-112217ef59df
[ 25.049822] XFS (dm-1): Mounting V5 Filesystem 0ac3d742-375d-4cd7-bdd2-72b0559b1957
[ 25.050953] XFS (sdb2): Mounting V5 Filesystem c72725b8-35e3-42b4-b5cb-f8435cada964
[ 25.055813] XFS (nvme0n1p1): Ending clean mount
[ 25.056844] xfs filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff)
[ OK ] Mounted /home.
[ 25.389921] XFS (dm-1): Ending clean mount
[ 25.513566] xfs filesystem being mounted at /home2 supports timestamps until 2038 (0x7fffffff)
[ OK ] Mounted /home2.
[ 26.797307] XFS (sdb2): Ending clean mount
[ 26.857340] xfs filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Tell Plymouth To Write Out Runtime Data...
Starting Restore /run/initramfs on shutdown...
Starting Import network configuration from initramfs...
[ OK ] Started Restore /run/initramfs on shutdown.
[ OK ] Started Import network configuration from initramfs.
Starting Create Volatile Files and Directories...
[ OK ] Started Tell Plymouth To Write Out Runtime Data.
[ OK ] Started Create Volatile Files and Directories.
Mounting RPC Pipe File System...
Starting Security Auditing Service...
Starting RPC Bind...
[ OK ] Started RPC Bind.
[ 27.888702] RPC: Registered named UNIX socket transport module.
[ 27.888714] RPC: Registered udp transport module.
[ 27.888717] RPC: Registered tcp transport module.
[ 27.888719] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ OK ] Mounted RPC Pipe File System.
[ OK ] Reached target rpc_pipefs.target.
[ OK ] Started Security Auditing Service.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Open-iSCSI iscsid Socket.
[ OK ] Listening on CUPS Scheduler.
[ OK ] Started Run system activity accounting tool every 10 minutes.
[ OK ] Started CUPS Scheduler.
[ OK ] Reached target Paths.
[ OK ] Listening on SSSD Kerberos Cache Manager responder socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Started Generate summary of yesterday's process accounting.
[ OK ] Started daily update of the root trust anchor for DNSSEC.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Started dnf makecache --timer.
[ OK ] Reached target Timers.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting NTP client/server...
Starting Hardware RNG Entropy Gatherer Wake threshold service...
[ OK ] Started libstoragemgmt plug-in server daemon.
[ OK ] Started irqbalance daemon.
Starting Resets System Activity Logs...
Starting ppc64-diag rtas_errd (platform error handling) Service...
Starting Self Monitoring and Reporting Technology (SMART) Daemon...
[ OK ] Reached target sshd-keygen.target.
Starting ABRT Automated Bug Reporting Tool...
Starting System Security Services Daemon...
Starting Authorization Manager...
[ OK ] Started D-Bus System Message Bus.
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started Hardware RNG Entropy Gatherer Wake threshold service.
[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
[ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
[ OK ] Started Resets System Activity Logs.
[ OK ] Started ppc64-diag rtas_errd (platform error handling) Service.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started NTP client/server.
[ OK ] Started System Security Services Daemon.
[ OK ] Reached target User and Group Name Lookups.
Starting Login Service...
[ OK ] Started Login Service.
[ OK ] Started Authorization Manager.
Starting firewalld - dynamic firewall daemon...
Starting Modem Manager...
[ OK ] Started Modem Manager.
[ OK ] Started firewalld - dynamic firewall daemon.
[ OK ] Reached target Network (Pre).
Starting Network Manager...
[ OK ] Started Network Manager.
Starting hybrid virtual network scan and config...
Starting Network Manager Wait Online...
[ OK ] Reached target Network.
Starting Enable periodic update of entitlement certificates....
Starting CUPS Scheduler...
Starting GSSAPI Proxy Daemon...
Starting OpenSSH server daemon...
Starting Logout off all iSCSI sessions on shutdown...
[ OK ] Started Logout off all iSCSI sessions on shutdown.
[ OK ] Started Enable periodic update of entitlement certificates..
Starting Hostname Service...
[ OK ] Started ABRT Automated Bug Reporting Tool.
[ OK ] Started ABRT kernel log watcher.
[ OK ] Started ABRT Xorg log watcher.
[ OK ] Started Creates ABRT problems from coredumpctl messages.
[ OK ] Started Hostname Service.
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[FAILED] Failed to start hybrid virtual network scan and config.
See 'systemctl status hcn-init.service' for details.
[ OK ] Started OpenSSH server daemon.
[ OK ] Started GSSAPI Proxy Daemon.
[ OK ] Reached target NFS client services.
Starting Network Manager Script Dispatcher Service...
[ OK ] Started CUPS Scheduler.
[ OK ] Started Network Manager Script Dispatcher Service.
[ OK ] Started Network Manager Wait Online.
[ OK ] Reached target Network is Online.
Starting Notify NFS peers of a restart...
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
Starting Harvest vmcores for ABRT...
Starting Permit User Sessions...
Starting System Logging Service...
[ OK ] Started Notify NFS peers of a restart.
[ OK ] Started Permit User Sessions.
[ OK ] Started Job spooling tools.
Starting Terminate Plymouth Boot Screen...
[ OK ] Started Command Scheduler.
Starting Hold until boot process finishes up...
[ OK ] Started System Logging Service.
[ 44.801795] ------------[ cut here ]------------
[ 44.801810] WARNING: CPU: 24 PID: 1906 at fs/xfs/xfs_inode.c:1839 xfs_iunlink_lookup+0x58/0x80 [xfs]
[ 44.801895] Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set rfkill nf_tables nfnetlink sunrpc pseries_rng xts vmx_crypto xfs libcrc32c sd_mod sg ibmvscsi nvme ibmveth scsi_transport_srp nvme_core t10_pi crc64_rocksoft crc64 dm_mirror dm_region_hash dm_log dm_mod
[ 44.801926] CPU: 24 PID: 1906 Comm: in:imjournal Not tainted 6.2.0-rc8ssh #35
[ 44.801930] Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1010.22 (NH1010_122) hv:phyp pSeries
[ 44.801933] NIP: c00800000062fa80 LR: c00800000062fa4c CTR: c000000000ea4d40
[ 44.801936] REGS: c00000001984b690 TRAP: 0700 Not tainted (6.2.0-rc8ssh)
[ 44.801939] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24224842 XER: 00000000
[ 44.801947] CFAR: c00800000062fa54 IRQMASK: 0
[ 44.801947] GPR00: c0000000091cbec8 c00000001984b930 c0080000006d8300 0000000000000000
[ 44.801947] GPR04: 00000000002ec44d 0000000000000000 0000000000000000 c000000051aa4d90
[ 44.801947] GPR08: 0000000000000000 c000000051aa4e40 0000000000000000 fffffffffffffffd
[ 44.801947] GPR12: 0000000000000040 c000004afece5880 0000000000000000 0000000004000000
[ 44.801947] GPR16: c00000001984bb38 c00000001984ba38 c00000001984ba68 c00000002c323c00
[ 44.801947] GPR20: c0000000091cbe00 0000000000008000 c0000000516e5800 00000000002ec44d
[ 44.801947] GPR24: 000000000030af4d 000000000000000d c000000008d71680 00000000002ec44d
[ 44.801947] GPR28: c00000002c322400 c0000000091cbe00 c000000054c05618 000000000030af4d
[ 44.801983] NIP [c00800000062fa80] xfs_iunlink_lookup+0x58/0x80 [xfs]
[ 44.802037] LR [c00800000062fa4c] xfs_iunlink_lookup+0x24/0x80 [xfs]
[ 44.802090] Call Trace:
[ 44.802091] [c00000001984b930] [c000000054c05618] 0xc000000054c05618 (unreliable)
[ 44.802096] [c00000001984b950] [c008000000630094] xfs_iunlink+0x1bc/0x280 [xfs]
[ 44.802149] [c00000001984b9d0] [c008000000634754] xfs_rename+0x69c/0xd10 [xfs]
[ 44.802202] [c00000001984bb10] [c00800000062e020] xfs_vn_rename+0xf8/0x1f0 [xfs]
[ 44.802255] [c00000001984bba0] [c000000000579efc] vfs_rename+0x9bc/0xdf0
[ 44.802261] [c00000001984bc90] [c00000000058018c] do_renameat2+0x3dc/0x5c0
[ 44.802265] [c00000001984bde0] [c000000000580520] sys_rename+0x60/0x80
[ 44.802269] [c00000001984be10] [c000000000033630] system_call_exception+0x150/0x3b0
[ 44.802274] [c00000001984be50] [c00000000000c554] system_call_common+0xf4/0x258
[ 44.802280] --- interrupt: c00 at 0x7fffa6482e20
[ 44.802282] NIP: 00007fffa6482e20 LR: 00007fffa6055e24 CTR: 0000000000000000
[ 44.802285] REGS: c00000001984be80 TRAP: 0c00 Not tainted (6.2.0-rc8ssh)
[ 44.802288] MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 2a082202 XER: 00000000
[ 44.802297] IRQMASK: 0
[ 44.802297] GPR00: 0000000000000026 00007fffa536d220 00007fffa6607300 00007fffa536d288
[ 44.802297] GPR04: 000000014f7a6b70 0000000000000000 0700000000000000 0000000000000002
[ 44.802297] GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 44.802297] GPR12: 0000000000000000 00007fffa53766e0 000000014f795930 0000000000000000
[ 44.802297] GPR16: 0000000126b67648 00007fffa6057ce0 0000000000000003 000000000000002b
[ 44.802297] GPR20: 0000000000000212 00007fffa536e3a0 00007fffa536e398 00007fff98008690
[ 44.802297] GPR24: 0000000000000000 00007fffa536e388 00007fffa536e378 00007fffa536e3b0
[ 44.802297] GPR28: 00007fffa6070000 00007fffa60705e0 00007fff98000c10 00007fffa536d288
[ 44.802331] NIP [00007fffa6482e20] 0x7fffa6482e20
[ 44.802334] LR [00007fffa6055e24] 0x7fffa6055e24
[ 44.802336] --- interrupt: c00
[ 44.802338] Code: 2c230000 4182002c e9230020 2fa90000 419e0020 38210020 e8010010 7c0803a6 4e800020 60000000 60000000 60000000 <0fe00000> 60000000 60000000 60000000
[ 44.802352] ---[ end trace 0000000000000000 ]---
[ 44.802356] XFS (dm-0): Internal error xfs_trans_cancel at line 1097 of file fs/xfs/xfs_trans.c. Caller xfs_rename+0x9cc/0xd10 [xfs]
[ 44.802412] CPU: 24 PID: 1906 Comm: in:imjournal Tainted: G W 6.2.0-rc8ssh #35
[ 44.802415] Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1010.22 (NH1010_122) hv:phyp pSeries
[ 44.802418] Call Trace:
[ 44.802420] [c00000001984b8f0] [c000000000e87328] dump_stack_lvl+0x6c/0x9c (unreliable)
[ 44.802425] [c00000001984b920] [c008000000616a84] xfs_error_report+0x5c/0x80 [xfs]
[ 44.802478] [c00000001984b980] [c0080000006467b0] xfs_trans_cancel+0x178/0x1b0 [xfs]
[ 44.802533] [c00000001984b9d0] [c008000000634a84] xfs_rename+0x9cc/0xd10 [xfs]
[ 44.802586] [c00000001984bb10] [c00800000062e020] xfs_vn_rename+0xf8/0x1f0 [xfs]
[ 44.802641] [c00000001984bba0] [c000000000579efc] vfs_rename+0x9bc/0xdf0
[ 44.802644] [c00000001984bc90] [c00000000058018c] do_renameat2+0x3dc/0x5c0
[ 44.802648] [c00000001984bde0] [c000000000580520] sys_rename+0x60/0x80
[ 44.802652] [c00000001984be10] [c000000000033630] system_call_exception+0x150/0x3b0
[ 44.802657] [c00000001984be50] [c00000000000c554] system_call_common+0xf4/0x258
[ 44.802661] --- interrupt: c00 at 0x7fffa6482e20
[ 44.802664] NIP: 00007fffa6482e20 LR: 00007fffa6055e24 CTR: 0000000000000000
[ 44.802667] REGS: c00000001984be80 TRAP: 0c00 Tainted: G W (6.2.0-rc8ssh)
[ 44.802670] MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 2a082202 XER: 00000000
[ 44.802678] IRQMASK: 0
[ 44.802678] GPR00: 0000000000000026 00007fffa536d220 00007fffa6607300 00007fffa536d288
[ 44.802678] GPR04: 000000014f7a6b70 0000000000000000 0700000000000000 0000000000000002
[ 44.802678] GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 44.802678] GPR12: 0000000000000000 00007fffa53766e0 000000014f795930 0000000000000000
[ 44.802678] GPR16: 0000000126b67648 00007fffa6057ce0 0000000000000003 000000000000002b
[ 44.802678] GPR20: 0000000000000212 00007fffa536e3a0 00007fffa536e398 00007fff98008690
[ 44.802678] GPR24: 0000000000000000 00007fffa536e388 00007fffa536e378 00007fffa536e3b0
[ 44.802678] GPR28: 00007fffa6070000 00007fffa60705e0 00007fff98000c10 00007fffa536d288
[ 44.802712] NIP [00007fffa6482e20] 0x7fffa6482e20
[ 44.802715] LR [00007fffa6055e24] 0x7fffa6055e24
[ 44.802717] --- interrupt: c00
[ 44.804354] XFS (dm-0): Corruption of in-memory data (0x8) detected at xfs_trans_cancel+0x190/0x1b0 [xfs] (fs/xfs/xfs_trans.c:1098). Shutting down filesystem.
[ 44.804413] XFS (dm-0): Please unmount the filesystem and rectify the problem(s)
>> [ 333.390615] Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink rfkill sunrpc pseries_rng xts vmx_crypto xfs libcrc32c sd_mod sg ibmvscsi ibmveth scsi_transport_srp nvme nvme_core t10_pi crc64_rocksoft crc64 dm_mirror dm_region_hash dm_log dm_mod
>> [ 333.390645] CPU: 56 PID: 12450 Comm: rm Not tainted 6.2.0-rc4ssh+ #4
>> [ 333.390649] Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1010.22 (NH1010_122) hv:phyp pSeries
>> [ 333.390652] NIP: c0080000004bfa80 LR: c0080000004bfa4c CTR: c000000000ea28d0
>> [ 333.390655] REGS: c0000000442bb8c0 TRAP: 0700 Not tainted (6.2.0-rc4ssh+)
>> [ 333.390658] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002842 XER: 00000000
>> [ 333.390666] CFAR: c0080000004bfa54 IRQMASK: 0
>> [ 333.390666] GPR00: c00000003b69c0c8 c0000000442bbb60 c008000000568300 0000000000000000
>> [ 333.390666] GPR04: 00000000002ec44d 0000000000000000 0000000000000000 c000000004b27d78
>> [ 333.390666] GPR08: 0000000000000000 c000000004b27e28 0000000000000000 fffffffffffffffd
>> [ 333.390666] GPR12: 0000000000000040 c000004afecc5880 0000000106620918 0000000000000001
>> [ 333.390666] GPR16: 000000010bd36e10 0000000106620dc8 0000000106620e58 0000000106620e90
>> [ 333.390666] GPR20: 0000000106620e30 c0000000880ba938 0000000000200000 00000000002ec44d
>> [ 333.390666] GPR24: 000000000008170d 000000000000000d c0000000519f4800 00000000002ec44d
>> [ 333.390666] GPR28: c0000000880ba800 c00000003b69c000 c0000000833edd20 000000000008170d
>> [ 333.390702] NIP [c0080000004bfa80] xfs_iunlink_lookup+0x58/0x80 [xfs]
>> [ 333.390756] LR [c0080000004bfa4c] xfs_iunlink_lookup+0x24/0x80 [xfs]
>> [ 333.390810] Call Trace:
>> [ 333.390811] [c0000000442bbb60] [c0000000833edd20] 0xc0000000833edd20 (unreliable)
>> [ 333.390816] [c0000000442bbb80] [c0080000004c0094] xfs_iunlink+0x1bc/0x280 [xfs]
>> [ 333.390869] [c0000000442bbc00] [c0080000004c3f84] xfs_remove+0x1dc/0x310 [xfs]
>> [ 333.390922] [c0000000442bbc70] [c0080000004be180] xfs_vn_unlink+0x68/0xf0 [xfs]
>> [ 333.390975] [c0000000442bbcd0] [c000000000576b24] vfs_unlink+0x1b4/0x3d0
>
> ...that trips when rm tries to remove a file, which means that the call
> stack is
>
> xfs_remove -> xfs_iunlink -> xfs_iunlink_insert_inode ->
> xfs_iunlink_update_backref -> xfs_iunlink_lookup <kaboom>
>
> It looks as though "rm foo" unlinked foo from the directory and was
> trying to insert it at the head of one of the unlinked lists in the AGI
> buffer. The AGI claims that the list points to an ondisk inode, so the
> iunlink code tries to find the incore inode to update the incore list,
> fails to find an incore inode, and this is the result...
This seems to happen for rename as well. i.e xfs_rename.
Does rename path calls rm first, and then create?
>>
>>
>> we did a git bisect between 5.17 and 6.0. Bisect points to commit 04755d2e5821
>> as the bad commit.
>> Short description of commit:
>> commit 04755d2e5821b3afbaadd09fe5df58d04de36484 (refs/bisect/bad)
>> Author: Dave Chinner <dchinner@redhat.com>
>> Date: Thu Jul 14 11:42:39 2022 +1000
>>
>> xfs: refactor xlog_recover_process_iunlinks()
>
> ...which was in the middle of the series that reworked thev mount time
> iunlink clearing. Oddly, I don't spot any obvious errors in /that/
> patch that didn't already exist. But this does make me wonder, does
> xfs_repair -n have anything to say about unlinked or orphaned inodes?
>
> The runtime code expects that every ondisk inode in an iunlink chain has
> an incore inode that is linked (via i_{next,prev}_unlinked) to the other
> incore inodes in that same chain. If this requirement is not met, then
> the WARNings you see will trip, and the fs shuts down.
>
> My hypothesis here is that one of the AGs has an unprocessed unlinked
> list. At mount time, the ondisk log was clean, so mount time log
> recovery didn't invoke xlog_recover_process_iunlinks, and the list was
> not cleared. The mount code does not construct the incore unlinked list
> from an existing ondisk iunlink list, hence the WARNing. Prior to 5.17,
> we only manipulated the ondisk unlink list, and the code never noticed
> or cared if there were mystery inodes in the list that never went away.
>
> (Obviously, if something blew up earlier in dmesg, that would be
> relevant here.)
>
> It's possible that we could end up in this situation (clean log,
> unlinked inodes) if a previous log recovery was only partially
> successful at clearing the unlinked list, since all that code ignores
> errors. If that happens, we ... succeed at mounting and clean the log.
>
> If you're willing to patch your kernels, it would be interesting
> to printk if the xfs_read_agi or the xlog_recover_iunlink_bucket calls
> in xlog_recover_iunlink_ag returns an error code. It might be too late
We can try. Please provide the Patch.
> to capture that, hence my suggestion of seeing if xfs_repair -n will
> tell us anything else.
>
Could you please clarify? We should run xfs_repair -n from 5.17-rc2 kernel?
> I've long thought that the iunlink recovery ought to complain loudly and
> fail the mount if it can't clear all the unlinked files. Given the new
> iunlink design, I think it's pretty much required now. The uglier piece
> is that now we either (a) have to clear iunlinks at mount time
> unconditionally as Eric has been saying for years; or (b) construct the
> incore list at a convenient time so that the incore list always exists.
>
> Thanks for the detailed report!
>
> --D
>
>>
>> Git bisect log:
>> git bisect start
>> # good: [26291c54e111ff6ba87a164d85d4a4e134b7315c] Linux 5.17-rc2
>> git bisect good 26291c54e111ff6ba87a164d85d4a4e134b7315c
>> # bad: [4fe89d07dcc2804c8b562f6c7896a45643d34b2f] Linux 6.0
>> git bisect bad 4fe89d07dcc2804c8b562f6c7896a45643d34b2f
>> # good: [d7227785e384d4422b3ca189aa5bf19f462337cc] Merge tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
>> git bisect good d7227785e384d4422b3ca189aa5bf19f462337cc
>> # good: [526942b8134cc34d25d27f95dfff98b8ce2f6fcd] Merge tag 'ata-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
>> git bisect good 526942b8134cc34d25d27f95dfff98b8ce2f6fcd
>> # good: [328141e51e6fc79d21168bfd4e356dddc2ec7491] Merge tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
>> git bisect good 328141e51e6fc79d21168bfd4e356dddc2ec7491
>> # bad: [eb555cb5b794f4e12a9897f3d46d5a72104cd4a7] Merge tag '5.20-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
>> git bisect bad eb555cb5b794f4e12a9897f3d46d5a72104cd4a7
>> # bad: [f20c95b46b8fa3ad34b3ea2e134337f88591468b] Merge tag 'tpmdd-next-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
>> git bisect bad f20c95b46b8fa3ad34b3ea2e134337f88591468b
>> # bad: [fad235ed4338749a66ddf32971d4042b9ef47f44] Merge tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
>> git bisect bad fad235ed4338749a66ddf32971d4042b9ef47f44
>> # good: [e495274793ea602415d050452088a496abcd9e6c] Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
>> git bisect good e495274793ea602415d050452088a496abcd9e6c
>> # good: [9daee913dc8d15eb65e0ff560803ab1c28bb480b] Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
>> git bisect good 9daee913dc8d15eb65e0ff560803ab1c28bb480b
>> # bad: [29b1d469f3f6842ee4115f0b21f018fc44176468] Merge tag 'trace-rtla-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
>> git bisect bad 29b1d469f3f6842ee4115f0b21f018fc44176468
>> # good: [932b42c66cb5d0ca9800b128415b4ad6b1952b3e] xfs: replace XFS_IFORK_Q with a proper predicate function
>> git bisect good 932b42c66cb5d0ca9800b128415b4ad6b1952b3e
>> # bad: [35c5a09f5346e690df7ff2c9075853e340ee10b3] Merge tag 'xfs-buf-lockless-lookup-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs into xfs-5.20-mergeB
>> git bisect bad 35c5a09f5346e690df7ff2c9075853e340ee10b3
>> # bad: [fad743d7cd8bd92d03c09e71f29eace860f50415] xfs: add log item precommit operation
>> git bisect bad fad743d7cd8bd92d03c09e71f29eace860f50415
>> # bad: [04755d2e5821b3afbaadd09fe5df58d04de36484] xfs: refactor xlog_recover_process_iunlinks()
>> git bisect bad 04755d2e5821b3afbaadd09fe5df58d04de36484
>> # good: [a4454cd69c66bf3e3bbda352b049732f836fc6b2] xfs: factor the xfs_iunlink functions
>> git bisect good a4454cd69c66bf3e3bbda352b049732f836fc6b2
>> Bisecting: 0 revisions left to test after this (roughly 0 steps)
>> [4fcc94d653270fcc7800dbaf3b11f78cb462b293] xfs: track the iunlink list pointer in the xfs_inode
>>
>>
>> Please reach out, in case any more details are needed. sent with very limited
>> knowledge of xfs system. these logs are from 5.19 kernel.
>>
>> # xfs_info /home
>> meta-data=/dev/nvme0n1p1 isize=512 agcount=4, agsize=13107200 blks
>> = sectsz=4096 attr=2, projid32bit=1
>> = crc=1 finobt=1, sparse=1, rmapbt=0
>> = reflink=1 bigtime=0 inobtcount=0
>> data = bsize=4096 blocks=52428800, imaxpct=25
>> = sunit=0 swidth=0 blks
>> naming =version 2 bsize=4096 ascii-ci=0, ftype=1
>> log =internal log bsize=4096 blocks=25600, version=2
>> = sectsz=4096 sunit=1 blks, lazy-count=1
>> realtime =none extsz=4096 blocks=0, rtextents=0
>>
>> # xfs_info -V
>> xfs_info version 5.0.0
>>
>> # uname -a
>> 5.19.0-rc2
next prev parent reply other threads:[~2023-02-18 7:18 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-17 11:15 xfs: system fails to boot up due to Internal error xfs_trans_cancel shrikanth hegde
2023-02-17 11:25 ` shrikanth hegde
2023-02-17 11:30 ` shrikanth hegde
2023-02-17 15:03 ` Linux regression tracking #adding (Thorsten Leemhuis)
2023-02-17 16:53 ` Darrick J. Wong
2023-02-17 20:25 ` Dave Chinner
2023-02-18 7:17 ` shrikanth hegde [this message]
2023-02-22 16:41 ` Darrick J. Wong
2023-02-24 8:04 ` shrikanth hegde
2023-02-24 21:18 ` Darrick J. Wong
2023-03-09 14:26 ` Ritesh Harjani
2023-03-09 17:27 ` Darrick J. Wong
2023-03-16 4:46 ` Ritesh Harjani
2023-03-16 5:20 ` Darrick J. Wong
2023-03-17 20:44 ` Darrick J. Wong
2023-03-18 16:50 ` Ritesh Harjani
2023-03-18 19:20 ` Darrick J. Wong
2023-03-20 5:20 ` Ritesh Harjani
2023-04-17 11:16 ` Linux regression tracking (Thorsten Leemhuis)
2023-04-18 4:56 ` Darrick J. Wong
2023-04-21 13:04 ` Linux regression tracking (Thorsten Leemhuis)
2023-06-05 13:27 ` Thorsten Leemhuis
2023-06-05 21:57 ` Darrick J. Wong
2023-06-06 2:46 ` Dave Chinner
2023-06-06 3:22 ` Darrick J. Wong
2023-06-06 11:23 ` Thorsten Leemhuis
2023-03-10 0:29 ` Dave Chinner
2023-03-16 4:48 ` Ritesh Harjani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=828a1562-3bf4-c1d8-d943-188ee6c3d4fa@linux.vnet.ibm.com \
--to=sshegde@linux.vnet.ibm.com \
--cc=dchinner@redhat.com \
--cc=djwong@kernel.org \
--cc=linux-xfs@vger.kernel.org \
--cc=ojaswin@linux.ibm.com \
--cc=srikar@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).