From: Chandan Babu R <chandanrlinux@gmail.com>
To: "Darrick J. Wong" <djwong@kernel.org>
Cc: guaneryu@gmail.com, linux-xfs@vger.kernel.org,
fstests@vger.kernel.org, guan@eryu.me
Subject: Re: [PATCH 06/10] xfs: test quota softlimit warning functionality
Date: Thu, 11 Mar 2021 16:40:58 +0530 [thread overview]
Message-ID: <87im5yc5dp.fsf@garuda> (raw)
In-Reply-To: <161526483668.1214319.17667836667890283825.stgit@magnolia>
On 09 Mar 2021 at 10:10, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@kernel.org>
>
> Make sure that quota softlimits work, which is to say that one can
> exceed the softlimit up to warnlimit times before it starts enforcing
> that.
>
> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> ---
> tests/xfs/915 | 162 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/915.out | 151 +++++++++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/group | 1
> 3 files changed, 314 insertions(+)
> create mode 100755 tests/xfs/915
> create mode 100644 tests/xfs/915.out
>
>
> diff --git a/tests/xfs/915 b/tests/xfs/915
> new file mode 100755
> index 00000000..a2cdbbb7
> --- /dev/null
> +++ b/tests/xfs/915
> @@ -0,0 +1,162 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2021 Oracle. All Rights Reserved.
> +#
> +# FS QA Test No. 915
> +#
> +# Check that quota softlimit warnings work the way they should. This means
> +# that we can disobey the softlimit up to warnlimit times before it turns into
> +# hard(er) enforcement. This is a functional test for quota warnings, but
> +# since the functionality has been broken for decades, this is also a
> +# regression test for commit 4b8628d57b72 ("xfs: actually bump warning counts
> +# when we send warnings").
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/quota
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_require_xfs_quota
> +_require_scratch
> +
> +rm -f $seqres.full
> +
> +qsetup()
> +{
> + opt=$1
> + enforce=0
> + if [ $opt = "u" -o $opt = "uno" ]; then
> + type=u
> + eval `_choose_uid`
> + elif [ $opt = "g" -o $opt = "gno" ]; then
> + type=g
> + eval `_choose_gid`
> + elif [ $opt = "p" -o $opt = "pno" ]; then
> + type=p
> + eval `_choose_prid`
> + fi
> + [ $opt = "u" -o $opt = "g" -o $opt = "p" ] && enforce=1
> +
> + echo "Using type=$type id=$id" >> $seqres.full
> +}
> +
> +exercise() {
> + _scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs
> + cat $tmp.mkfs >>$seqres.full
> +
> + # keep the blocksize and data size for dd later
> + . $tmp.mkfs
> +
> + _qmount
> +
> + qsetup $1
> +
> + echo "Using type=$type id=$id" >>$seqres.full
> +
> + echo
> + echo "*** report initial settings" | tee -a $seqres.full
> + $XFS_QUOTA_PROG -x \
> + -c "limit -$type isoft=3 ihard=500000 $id" \
> + -c "warn -$type -i -d 13" \
> + $SCRATCH_DEV
> + $XFS_QUOTA_PROG -x \
> + -c "state -$type" >> $seqres.full
> + $XFS_QUOTA_PROG -x \
> + -c "repquota -birnN -$type" $SCRATCH_DEV |
> + _filter_quota_report | LC_COLLATE=POSIX sort -ru
> +
> + echo
> + echo "*** push past the soft inode limit" | tee -a $seqres.full
> + _file_as_id $SCRATCH_MNT/softok1 $id $type $bsize 0
> + _file_as_id $SCRATCH_MNT/softok2 $id $type $bsize 0
> + _file_as_id $SCRATCH_MNT/softok3 $id $type $bsize 0
> + _file_as_id $SCRATCH_MNT/softwarn1 $id $type $bsize 0
> + $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> + -c "repquota -birnN -$type" $SCRATCH_DEV |
> + _filter_quota_report | LC_COLLATE=POSIX sort -ru
> +
> + echo
> + echo "*** push further past the soft inode limit" | tee -a $seqres.full
> + for warn_nr in $(seq 2 5); do
> + _file_as_id $SCRATCH_MNT/softwarn$warn_nr $id $type $bsize 0
> + done
> + $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> + -c "repquota -birnN -$type" $SCRATCH_DEV |
> + _filter_quota_report | LC_COLLATE=POSIX sort -ru
> +
> + echo
> + echo "*** push past the soft inode warning limit" | tee -a $seqres.full
> + for warn_nr in $(seq 6 15); do
> + _file_as_id $SCRATCH_MNT/softwarn$warn_nr $id $type $bsize 0
> + done
> + $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> + -c "repquota -birnN -$type" $SCRATCH_DEV |
> + _filter_quota_report | LC_COLLATE=POSIX sort -ru
> +
> + echo
> + echo "*** unmount"
> + _scratch_unmount
> +}
> +
> +_scratch_mkfs > $seqres.full
> +_scratch_mount >> $seqres.full
> +
> +chmod a+rwx $SCRATCH_MNT $seqres.full # arbitrary users will write here
> +bsize=$(_get_file_block_size $SCRATCH_MNT)
> +_scratch_unmount
> +
> +cat >$tmp.projects <<EOF
> +1:$SCRATCH_MNT
> +EOF
> +
> +cat >$tmp.projid <<EOF
> +root:0
> +scratch:1
> +EOF
> +
> +projid_file="$tmp.projid"
> +
> +echo "*** user"
> +_qmount_option "uquota"
> +exercise u
> +
> +echo "*** group"
> +_qmount_option "gquota"
> +exercise g
> +
> +echo "*** uqnoenforce"
> +_qmount_option "uqnoenforce"
> +exercise uno
> +
> +echo "*** gqnoenforce"
> +_qmount_option "gqnoenforce"
> +exercise gno
> +
> +echo "*** pquota"
> +_qmount_option "pquota"
> +exercise p
> +
> +echo "*** pqnoenforce"
> +_qmount_option "pqnoenforce"
> +exercise pno
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/915.out b/tests/xfs/915.out
> new file mode 100644
> index 00000000..c3bb855e
> --- /dev/null
> +++ b/tests/xfs/915.out
> @@ -0,0 +1,151 @@
> +QA output created by 915
> +*** user
> +meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
> +data = bsize=XXX blocks=XXX, imaxpct=PCT
> + = sunit=XXX swidth=XXX, unwritten=X
> +naming =VERN bsize=XXX
> +log =LDEV bsize=XXX blocks=XXX
> +realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> +
> +*** report initial settings
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 4 3 500000 01 [7 days] 0 0 0 00 [--------]
> +
> +*** push further past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 8 3 500000 05 [7 days] 0 0 0 00 [--------]
> +
> +*** push past the soft inode warning limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 16 3 500000 13 [7 days] 0 0 0 00 [--------]
> +
> +*** unmount
> +*** group
> +meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
> +data = bsize=XXX blocks=XXX, imaxpct=PCT
> + = sunit=XXX swidth=XXX, unwritten=X
> +naming =VERN bsize=XXX
> +log =LDEV bsize=XXX blocks=XXX
> +realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> +
> +*** report initial settings
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 4 3 500000 01 [7 days] 0 0 0 00 [--------]
> +
> +*** push further past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 8 3 500000 05 [7 days] 0 0 0 00 [--------]
> +
> +*** push past the soft inode warning limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 16 3 500000 13 [7 days] 0 0 0 00 [--------]
> +
> +*** unmount
> +*** uqnoenforce
> +meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
> +data = bsize=XXX blocks=XXX, imaxpct=PCT
> + = sunit=XXX swidth=XXX, unwritten=X
> +naming =VERN bsize=XXX
> +log =LDEV bsize=XXX blocks=XXX
> +realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> +
> +*** report initial settings
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 4 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push further past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 8 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode warning limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 18 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** unmount
> +*** gqnoenforce
> +meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
> +data = bsize=XXX blocks=XXX, imaxpct=PCT
> + = sunit=XXX swidth=XXX, unwritten=X
> +naming =VERN bsize=XXX
> +log =LDEV bsize=XXX blocks=XXX
> +realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> +
> +*** report initial settings
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 4 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push further past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 8 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode warning limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 18 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** unmount
> +*** pquota
> +meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
> +data = bsize=XXX blocks=XXX, imaxpct=PCT
> + = sunit=XXX swidth=XXX, unwritten=X
> +naming =VERN bsize=XXX
> +log =LDEV bsize=XXX blocks=XXX
> +realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> +
> +*** report initial settings
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 4 3 500000 02 [7 days] 0 0 0 00 [--------]
At this point in the test we have created 4 files.
1. softok{1,2,3}
2. softwarn1
So we have exceeded the soft inode limit (i.e. 3) once. But the warning has
been issued twice.
_file_as_id() changes the project id of parent of each of the above files. In
this case all the above listed files have $SCRATCH_MNT as the parent. So by
the time softok2 is created we have already reached the soft inode limit of 3
(parent and the two softok{1,2} files) and creation of softok3 and softwarn1
generates the two warnings listed above. If this explaination is correct,
shouldn't 'Used' inode count have a value of 5 (including the inode associated
with $SCRATCH_MNT)?
--
chandan
next prev parent reply other threads:[~2021-03-11 11:12 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-09 4:40 [PATCHSET 00/10] fstests: test kernel regressions fixed in 5.12 Darrick J. Wong
2021-03-09 4:40 ` [PATCH 01/10] xfs: test regression in xfs_bmap_validate_extent Darrick J. Wong
2021-03-09 4:40 ` [PATCH 02/10] generic: test reflink and copy_file_range behavior with O_SYNC and FS_XFLAG_SYNC files Darrick J. Wong
2021-03-09 4:40 ` [PATCH 03/10] xfs: test rtalloc alignment and math errors Darrick J. Wong
2021-03-11 7:58 ` Chandan Babu R
2021-03-23 4:15 ` Darrick J. Wong
2021-03-25 7:52 ` Chandan Babu R
2021-03-09 4:40 ` [PATCH 04/10] xfs: test mkfs min log size calculation w/ rt volumes Darrick J. Wong
2021-03-11 9:32 ` Chandan Babu R
2021-03-14 14:51 ` Eryu Guan
2021-03-14 16:39 ` Eryu Guan
2021-03-09 4:40 ` [PATCH 05/10] common/filter: refactor quota report filtering Darrick J. Wong
2021-03-11 9:42 ` Chandan Babu R
2021-03-09 4:40 ` [PATCH 06/10] xfs: test quota softlimit warning functionality Darrick J. Wong
2021-03-11 11:10 ` Chandan Babu R [this message]
2021-03-12 4:25 ` Chandan Babu R
2021-03-09 4:40 ` [PATCH 07/10] xfs/122: fix test for xfs_attr_shortform_t conversion Darrick J. Wong
2021-03-11 12:58 ` Christoph Hellwig
2021-03-09 4:40 ` [PATCH 08/10] generic: test file writers racing with FIDEDUPERANGE Darrick J. Wong
2021-03-12 7:13 ` Chandan Babu R
2021-03-09 4:40 ` [PATCH 09/10] generic: test a deadlock in xfs_rename when whiteing out files Darrick J. Wong
2021-03-14 18:06 ` Eryu Guan
2021-03-15 16:54 ` Darrick J. Wong
2021-03-09 4:40 ` [PATCH 10/10] xfs: test delalloc quota leak when chprojid fails Darrick J. Wong
2021-03-12 8:49 ` Chandan Babu R
2021-03-14 18:07 ` [PATCHSET 00/10] fstests: test kernel regressions fixed in 5.12 Eryu Guan
2021-03-14 21:36 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87im5yc5dp.fsf@garuda \
--to=chandanrlinux@gmail.com \
--cc=djwong@kernel.org \
--cc=fstests@vger.kernel.org \
--cc=guan@eryu.me \
--cc=guaneryu@gmail.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).