linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Sathvika Vasireddy <sv@linux.ibm.com>,
	"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>
Cc: "peterz@infradead.org" <peterz@infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"rostedt@goodmis.org" <rostedt@goodmis.org>,
	"aik@ozlabs.ru" <aik@ozlabs.ru>,
	"jpoimboe@redhat.com" <jpoimboe@redhat.com>,
	"naveen.n.rao@linux.vnet.ibm.com"
	<naveen.n.rao@linux.vnet.ibm.com>,
	"mbenes@suse.cz" <mbenes@suse.cz>
Subject: Re: [RFC PATCH 3/4] objtool/powerpc: Enable objtool to be built on ppc
Date: Tue, 24 May 2022 09:13:01 +0000	[thread overview]
Message-ID: <005ffe8a-166e-d3bb-4e42-0ece6f5aada7@csgroup.eu> (raw)
In-Reply-To: <20220523175548.922671-4-sv@linux.ibm.com>



Le 23/05/2022 à 19:55, Sathvika Vasireddy a écrit :
> This patch adds [stub] implementations for required
> functions, inorder to enable objtool build on powerpc.

Should we put some exit() or abort() in the stubs that are not supposed 
to be used at all ?

> 
> Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
> ---
>   arch/powerpc/Kconfig                          |  1 +
>   tools/objtool/arch/powerpc/Build              |  2 +
>   tools/objtool/arch/powerpc/decode.c           | 73 +++++++++++++++++++
>   .../arch/powerpc/include/arch/cfi_regs.h      | 11 +++
>   tools/objtool/arch/powerpc/include/arch/elf.h |  8 ++
>   .../arch/powerpc/include/arch/endianness.h    |  9 +++
>   .../arch/powerpc/include/arch/special.h       | 21 ++++++
>   tools/objtool/arch/powerpc/special.c          | 19 +++++
>   8 files changed, 144 insertions(+)
>   create mode 100644 tools/objtool/arch/powerpc/Build
>   create mode 100644 tools/objtool/arch/powerpc/decode.c
>   create mode 100644 tools/objtool/arch/powerpc/include/arch/cfi_regs.h
>   create mode 100644 tools/objtool/arch/powerpc/include/arch/elf.h
>   create mode 100644 tools/objtool/arch/powerpc/include/arch/endianness.h
>   create mode 100644 tools/objtool/arch/powerpc/include/arch/special.h
>   create mode 100644 tools/objtool/arch/powerpc/special.c
> 
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 174edabb74fa..732a3f91ee5e 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -232,6 +232,7 @@ config PPC
>   	select HAVE_MOD_ARCH_SPECIFIC
>   	select HAVE_NMI				if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
>   	select HAVE_OPTPROBES
> +	select HAVE_OBJTOOL			if PPC64
>   	select HAVE_PERF_EVENTS
>   	select HAVE_PERF_EVENTS_NMI		if PPC64
>   	select HAVE_PERF_REGS
> diff --git a/tools/objtool/arch/powerpc/Build b/tools/objtool/arch/powerpc/Build
> new file mode 100644
> index 000000000000..d24d5636a5b8
> --- /dev/null
> +++ b/tools/objtool/arch/powerpc/Build
> @@ -0,0 +1,2 @@
> +objtool-y += decode.o
> +objtool-y += special.o
> diff --git a/tools/objtool/arch/powerpc/decode.c b/tools/objtool/arch/powerpc/decode.c
> new file mode 100644
> index 000000000000..e3b77a6ce357
> --- /dev/null
> +++ b/tools/objtool/arch/powerpc/decode.c
> @@ -0,0 +1,73 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <objtool/check.h>
> +#include <objtool/elf.h>
> +#include <objtool/arch.h>
> +#include <objtool/warn.h>
> +#include <objtool/builtin.h>
> +
> +unsigned long arch_dest_reloc_offset(int addend)
> +{
> +	return addend;
> +}
> +
> +bool arch_callee_saved_reg(unsigned char reg)
> +{
> +	return false;
> +}
> +
> +int arch_decode_hint_reg(u8 sp_reg, int *base)
> +{
> +	return 0;
> +}
> +
> +const char *arch_nop_insn(int len)
> +{
> +	return NULL;
> +}
> +
> +const char *arch_ret_insn(int len)
> +{
> +	return NULL;
> +}
> +
> +int arch_decode_instruction(struct objtool_file *file, const struct section *sec,
> +			    unsigned long offset, unsigned int maxlen,
> +			    unsigned int *len, enum insn_type *type,
> +			    unsigned long *immediate,
> +			    struct list_head *ops_list)
> +{
> +	u32 insn;
> +
> +	*immediate = 0;
> +	memcpy(&insn, sec->data->d_buf+offset, 4);
> +	*len = 4;
> +	*type = INSN_OTHER;
> +
> +	return 0;
> +}
> +
> +unsigned long arch_jump_destination(struct instruction *insn)
> +{
> +	return insn->offset +  insn->immediate;
> +}
> +
> +void arch_initial_func_cfi_state(struct cfi_init_state *state)
> +{
> +	int i;
> +
> +	for (i = 0; i < CFI_NUM_REGS; i++) {
> +		state->regs[i].base = CFI_UNDEFINED;
> +		state->regs[i].offset = 0;
> +	}
> +
> +	/* initial CFA (call frame address) */
> +	state->cfa.base = CFI_SP;
> +	state->cfa.offset = 0;
> +
> +	/* initial LR (return address) */
> +	state->regs[CFI_RA].base = CFI_CFA;
> +	state->regs[CFI_RA].offset = 0;
> +}
> diff --git a/tools/objtool/arch/powerpc/include/arch/cfi_regs.h b/tools/objtool/arch/powerpc/include/arch/cfi_regs.h
> new file mode 100644
> index 000000000000..59638ebeafc8
> --- /dev/null
> +++ b/tools/objtool/arch/powerpc/include/arch/cfi_regs.h
> @@ -0,0 +1,11 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +
> +#ifndef _OBJTOOL_CFI_REGS_H
> +#define _OBJTOOL_CFI_REGS_H
> +
> +#define CFI_BP 1
> +#define CFI_SP CFI_BP
> +#define CFI_RA 32
> +#define CFI_NUM_REGS 33
> +
> +#endif
> diff --git a/tools/objtool/arch/powerpc/include/arch/elf.h b/tools/objtool/arch/powerpc/include/arch/elf.h
> new file mode 100644
> index 000000000000..3c8ebb7d2a6b
> --- /dev/null
> +++ b/tools/objtool/arch/powerpc/include/arch/elf.h
> @@ -0,0 +1,8 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +
> +#ifndef _OBJTOOL_ARCH_ELF
> +#define _OBJTOOL_ARCH_ELF
> +
> +#define R_NONE R_PPC_NONE
> +
> +#endif /* _OBJTOOL_ARCH_ELF */
> diff --git a/tools/objtool/arch/powerpc/include/arch/endianness.h b/tools/objtool/arch/powerpc/include/arch/endianness.h
> new file mode 100644
> index 000000000000..7c362527da20
> --- /dev/null
> +++ b/tools/objtool/arch/powerpc/include/arch/endianness.h
> @@ -0,0 +1,9 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +#ifndef _ARCH_ENDIANNESS_H
> +#define _ARCH_ENDIANNESS_H
> +
> +#include <endian.h>
> +
> +#define __TARGET_BYTE_ORDER __LITTLE_ENDIAN
> +
> +#endif /* _ARCH_ENDIANNESS_H */
> diff --git a/tools/objtool/arch/powerpc/include/arch/special.h b/tools/objtool/arch/powerpc/include/arch/special.h
> new file mode 100644
> index 000000000000..ffef9ada7133
> --- /dev/null
> +++ b/tools/objtool/arch/powerpc/include/arch/special.h
> @@ -0,0 +1,21 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +#ifndef _PPC_ARCH_SPECIAL_H
> +#define _PPC_ARCH_SPECIAL_H
> +
> +#define EX_ENTRY_SIZE 8
> +#define EX_ORIG_OFFSET 0
> +#define EX_NEW_OFFSET 4
> +
> +#define JUMP_ENTRY_SIZE 16
> +#define JUMP_ORIG_OFFSET 0
> +#define JUMP_NEW_OFFSET 4
> +#define JUMP_KEY_OFFSET 8
> +
> +#define ALT_ENTRY_SIZE 12
> +#define ALT_ORIG_OFFSET 0
> +#define ALT_NEW_OFFSET 4
> +#define ALT_FEATURE_OFFSET 8
> +#define ALT_ORIG_LEN_OFFSET 10
> +#define ALT_NEW_LEN_OFFSET 11
> +
> +#endif /* _PPC_ARCH_SPECIAL_H */
> diff --git a/tools/objtool/arch/powerpc/special.c b/tools/objtool/arch/powerpc/special.c
> new file mode 100644
> index 000000000000..e3e75cbab858
> --- /dev/null
> +++ b/tools/objtool/arch/powerpc/special.c
> @@ -0,0 +1,19 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +#include <string.h>
> +
> +#include <objtool/special.h>
> +#include <objtool/builtin.h>
> +
> +
> +bool arch_support_alt_relocation(struct special_alt *special_alt,
> +				 struct instruction *insn,
> +				 struct reloc *reloc)
> +{
> +	return false;
> +}
> +
> +struct reloc *arch_find_switch_table(struct objtool_file *file,
> +				    struct instruction *insn)
> +{
> +	return NULL;
> +}

  reply	other threads:[~2022-05-24  9:13 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-23 17:55 [RFC PATCH 0/4] objtool: Enable and implement --mcount option on powerpc Sathvika Vasireddy
2022-05-23 17:55 ` [RFC PATCH 1/4] objtool: Add --mnop as an option to --mcount Sathvika Vasireddy
2022-05-24  8:54   ` Christophe Leroy
2022-05-24 10:15     ` Naveen N. Rao
2022-05-24 10:20       ` Christophe Leroy
2022-05-24 10:31         ` Naveen N. Rao
2022-05-25 11:36           ` Peter Zijlstra
2022-05-26 11:51             ` Naveen N. Rao
2022-05-23 17:55 ` [RFC PATCH 2/4] objtool: Enable objtool to run only on files with ftrace enabled Sathvika Vasireddy
2022-05-24  8:57   ` Christophe Leroy
2022-05-24 10:53     ` Sathvika Vasireddy
2022-05-24 13:28       ` Christophe Leroy
2022-05-23 17:55 ` [RFC PATCH 3/4] objtool/powerpc: Enable objtool to be built on ppc Sathvika Vasireddy
2022-05-24  9:13   ` Christophe Leroy [this message]
2022-05-23 17:55 ` [RFC PATCH 4/4] objtool/powerpc: Add --mcount specific implementation Sathvika Vasireddy
2022-05-24  9:35   ` Christophe Leroy
2022-05-24 11:00     ` Sathvika Vasireddy
2022-05-24 13:33       ` Christophe Leroy
2022-05-25 17:27         ` Christophe Leroy
2022-05-31  6:20           ` Christophe Leroy
2022-06-16 13:34             ` Naveen N. Rao
2022-06-16 13:40               ` Christophe Leroy
2022-06-16 13:57                 ` Peter Zijlstra
2022-06-16 14:06                   ` Christophe Leroy
2022-06-17 14:04                     ` Naveen N. Rao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=005ffe8a-166e-d3bb-4e42-0ece6f5aada7@csgroup.eu \
    --to=christophe.leroy@csgroup.eu \
    --cc=aik@ozlabs.ru \
    --cc=jpoimboe@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mbenes@suse.cz \
    --cc=naveen.n.rao@linux.vnet.ibm.com \
    --cc=peterz@infradead.org \
    --cc=rostedt@goodmis.org \
    --cc=sv@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).