linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
To: Michael Ellerman <mpe@ellerman.id.au>,
	Michael Neuling <mikey@neuling.org>,
	Nicholas Piggin <npiggin@gmail.com>,
	Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>,
	Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>,
	Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	"Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
Subject: [v4 PATCH 1/2] powerpc/powernv: Save/Restore additional SPRs for stop4 cpuidle
Date: Mon,  7 Aug 2017 11:12:43 +0530	[thread overview]
Message-ID: <028e348ec8a019229bd8e348a98aa973883271db.1502084311.git.ego@linux.vnet.ibm.com> (raw)
In-Reply-To: <cover.1502084311.git.ego@linux.vnet.ibm.com>
In-Reply-To: <cover.1502084311.git.ego@linux.vnet.ibm.com>

From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>

The stop4 idle state on POWER9 is a deep idle state which loses
hypervisor resources, but whose latency is low enough that it can be
exposed via cpuidle.

Until now, the deep idle states which lose hypervisor resources (eg:
winkle) were only exposed via CPU-Hotplug.  Hence currently on wakeup
from such states, barring a few SPRs which need to be restored to
their older value, rest of the SPRS are reinitialized to their values
corresponding to that at boot time.

When stop4 is used in the context of cpuidle, we want these additional
SPRs to be restored to their older value, to ensure that the context
on the CPU coming back from idle is same as it was before going idle.

In this patch, we define a SPR save area in PACA (since we have used
up the volatile register space in the stack) and on POWER9, we restore
SPRN_PID, SPRN_LDBAR, SPRN_FSCR, SPRN_HFSCR, SPRN_MMCRA, SPRN_MMCR1,
SPRN_MMCR2 to the values they had before entering stop.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/cpuidle.h | 11 +++++++
 arch/powerpc/include/asm/paca.h    |  7 ++++
 arch/powerpc/kernel/asm-offsets.c  |  8 +++++
 arch/powerpc/kernel/idle_book3s.S  | 65 ++++++++++++++++++++++++++++++++++++--
 4 files changed, 89 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/cpuidle.h b/arch/powerpc/include/asm/cpuidle.h
index 52586f9..8a174cb 100644
--- a/arch/powerpc/include/asm/cpuidle.h
+++ b/arch/powerpc/include/asm/cpuidle.h
@@ -67,6 +67,17 @@
 #define ERR_DEEP_STATE_ESL_MISMATCH	-2
 
 #ifndef __ASSEMBLY__
+/* Additional SPRs that need to be saved/restored during stop */
+struct stop_sprs {
+	u64 pid;
+	u64 ldbar;
+	u64 fscr;
+	u64 hfscr;
+	u64 mmcr1;
+	u64 mmcr2;
+	u64 mmcra;
+};
+
 extern u32 pnv_fastsleep_workaround_at_entry[];
 extern u32 pnv_fastsleep_workaround_at_exit[];
 
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index dc88a31..04b60af 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -31,6 +31,7 @@
 #endif
 #include <asm/accounting.h>
 #include <asm/hmi.h>
+#include <asm/cpuidle.h>
 
 register struct paca_struct *local_paca asm("r13");
 
@@ -183,6 +184,12 @@ struct paca_struct {
 	struct paca_struct **thread_sibling_pacas;
 	/* The PSSCR value that the kernel requested before going to stop */
 	u64 requested_psscr;
+
+	/*
+	 * Save area for additional SPRs that need to be
+	 * saved/restored during cpuidle stop.
+	 */
+	struct stop_sprs stop_sprs;
 #endif
 
 #ifdef CONFIG_PPC_STD_MMU_64
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 6e95c2c..8cfb20e 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -746,6 +746,14 @@ int main(void)
 	OFFSET(PACA_SUBCORE_SIBLING_MASK, paca_struct, subcore_sibling_mask);
 	OFFSET(PACA_SIBLING_PACA_PTRS, paca_struct, thread_sibling_pacas);
 	OFFSET(PACA_REQ_PSSCR, paca_struct, requested_psscr);
+#define STOP_SPR(x, f)	OFFSET(x, paca_struct, stop_sprs.f)
+	STOP_SPR(STOP_PID, pid);
+	STOP_SPR(STOP_LDBAR, ldbar);
+	STOP_SPR(STOP_FSCR, fscr);
+	STOP_SPR(STOP_HFSCR, hfscr);
+	STOP_SPR(STOP_MMCR1, mmcr1);
+	STOP_SPR(STOP_MMCR2, mmcr2);
+	STOP_SPR(STOP_MMCRA, mmcra);
 #endif
 
 	DEFINE(PPC_DBELL_SERVER, PPC_DBELL_SERVER);
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S
index 516ebef..4621568 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -85,7 +85,61 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300)
 	std	r3,_WORT(r1)
 	mfspr	r3,SPRN_WORC
 	std	r3,_WORC(r1)
+/*
+ * On POWER9, there are idle states such as stop4, invoked via cpuidle,
+ * that lose hypervisor resources. In such cases, we need to save
+ * additional SPRs before entering those idle states so that they can
+ * be restored to their older values on wakeup from the idle state.
+ *
+ * On POWER8, the only such deep idle state is winkle which is used
+ * only in the context of CPU-Hotplug, where these additional SPRs are
+ * reinitiazed to a sane value. Hence there is no need to save/restore
+ * these SPRs.
+ */
+BEGIN_FTR_SECTION
+	blr
+END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
+
+power9_save_additional_sprs:
+	mfspr	r3, SPRN_PID
+	mfspr	r4, SPRN_LDBAR
+	std	r3, STOP_PID(r13)
+	std	r4, STOP_LDBAR(r13)
 
+	mfspr	r3, SPRN_FSCR
+	mfspr	r4, SPRN_HFSCR
+	std	r3, STOP_FSCR(r13)
+	std	r4, STOP_HFSCR(r13)
+
+	mfspr	r3, SPRN_MMCRA
+	mfspr	r4, SPRN_MMCR1
+	std	r3, STOP_MMCRA(r13)
+	std	r4, STOP_MMCR1(r13)
+
+	mfspr	r3, SPRN_MMCR2
+	std	r3, STOP_MMCR2(r13)
+	blr
+
+power9_restore_additional_sprs:
+	ld	r3,_LPCR(r1)
+	ld	r4, STOP_PID(r13)
+	mtspr	SPRN_LPCR,r3
+	mtspr	SPRN_PID, r4
+
+	ld	r3, STOP_LDBAR(r13)
+	ld	r4, STOP_FSCR(r13)
+	mtspr	SPRN_LDBAR, r3
+	mtspr	SPRN_FSCR, r4
+
+	ld	r3, STOP_HFSCR(r13)
+	ld	r4, STOP_MMCRA(r13)
+	mtspr	SPRN_HFSCR, r3
+	mtspr	SPRN_MMCRA, r4
+	/* We have already restored PACA_MMCR0 */
+	ld	r3, STOP_MMCR1(r13)
+	ld	r4, STOP_MMCR2(r13)
+	mtspr	SPRN_MMCR1, r3
+	mtspr	SPRN_MMCR2, r4
 	blr
 
 /*
@@ -803,9 +857,16 @@ no_segments:
 	mtctr	r12
 	bctrl
 
+/*
+ * On POWER9, we can come here on wakeup from a cpuidle stop state.
+ * Hence restore the additional SPRs to the saved value.
+ *
+ * On POWER8, we come here only on winkle. Since winkle is used
+ * only in the case of CPU-Hotplug, we don't need to restore
+ * the additional SPRs.
+ */
 BEGIN_FTR_SECTION
-	ld	r4,_LPCR(r1)
-	mtspr	SPRN_LPCR,r4
+	bl 	power9_restore_additional_sprs
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
 hypervisor_state_restored:
 
-- 
1.9.4

  reply	other threads:[~2017-08-07  5:43 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-07  5:42 [v4 PATCH 0/2] powerpc/powernv: Enable stop4 via cpuidle Gautham R. Shenoy
2017-08-07  5:42 ` Gautham R. Shenoy [this message]
2017-08-07  5:42 ` [v4 PATCH 2/2] powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug Gautham R. Shenoy
2017-08-07  7:43 ` [v4 PATCH 0/2] powerpc/powernv: Enable stop4 via cpuidle Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=028e348ec8a019229bd8e348a98aa973883271db.1502084311.git.ego@linux.vnet.ibm.com \
    --to=ego@linux.vnet.ibm.com \
    --cc=akshay.adiga@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mikey@neuling.org \
    --cc=mpe@ellerman.id.au \
    --cc=npiggin@gmail.com \
    --cc=shilpa.bhat@linux.vnet.ibm.com \
    --cc=svaidy@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).