From: Anatolij Gustschin <agust@denx.de>
To: linuxppc-dev@lists.ozlabs.org
Cc: devicetree-discuss@lists.ozlabs.org, Heiko Schocher <hs@denx.de>
Subject: [PATCH 2/2] powerpc/5200: dts: digsy_mtc.dts: update to add can, pci, serial and spi
Date: Mon, 16 May 2011 18:02:44 +0200 [thread overview]
Message-ID: <1305561764-5942-2-git-send-email-agust@denx.de> (raw)
In-Reply-To: <1305561764-5942-1-git-send-email-agust@denx.de>
Add new nodes to describe more hardware the board is
equipped with:
- two can nodes for SJA1000 on localbus
- pci node to support Coral-PA graphics controller
- serial node for SC28L92 DUART on localbus
- spi node for MSP430 device
Also correct i2c eeprom node name.
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
arch/powerpc/boot/dts/digsy_mtc.dts | 50 ++++++++++++++++++++++++++++++++--
1 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 27bd267..e205d17 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -38,6 +38,14 @@
status = "disabled";
};
+ spi@f00 {
+ msp430@0 {
+ compatible = "spidev";
+ spi-max-frequency = <32000>;
+ reg = <0>;
+ };
+ };
+
psc@2000 { // PSC1
status = "disabled";
};
@@ -73,11 +81,16 @@
};
i2c@3d00 {
- rtc@50 {
+ eeprom@50 {
compatible = "at,24c08";
reg = <0x50>;
};
+ rtc@56 {
+ compatible = "mc,rv3029c2";
+ reg = <0x56>;
+ };
+
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
@@ -90,11 +103,22 @@
};
pci@f0000d00 {
- status = "disabled";
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+ 0xc000 0 0 2 &mpc5200_pic 0 0 3
+ 0xc000 0 0 3 &mpc5200_pic 0 0 3
+ 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+ 0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
};
localbus {
- ranges = <0 0 0xff000000 0x1000000>;
+ ranges = <0 0 0xff000000 0x1000000
+ 4 0 0x60000000 0x0001000>;
// 16-bit flash device at LocalPlus Bus CS0
flash@0,0 {
@@ -122,5 +146,25 @@
reg = <0x00f00000 0x100000>;
};
};
+
+ can@4,0 {
+ compatible = "nxp,sja1000";
+ reg = <4 0x000 0x80>;
+ nxp,external-clock-frequency = <24000000>;
+ interrupts = <1 2 3>; // Level-low
+ };
+
+ can@4,100 {
+ compatible = "nxp,sja1000";
+ reg = <4 0x100 0x80>;
+ nxp,external-clock-frequency = <24000000>;
+ interrupts = <1 2 3>; // Level-low
+ };
+
+ serial@4,200 {
+ compatible = "nxp,sc28l92";
+ reg = <4 0x200 0x10>;
+ interrupts = <1 3 3>;
+ };
};
};
--
1.7.1
next prev parent reply other threads:[~2011-05-16 16:02 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-16 16:02 [PATCH 1/2] powerpc/5200: mpc5200b.dtsi: add spi node address- and size-cells properties Anatolij Gustschin
2011-05-16 16:02 ` Anatolij Gustschin [this message]
2011-06-06 22:27 ` [PATCH] powerpc/5200: dts: digsy_mtc.dts: add timer0 and timer1 gpio properties Anatolij Gustschin
2011-07-06 9:46 ` Anatolij Gustschin
2011-07-06 17:16 ` Grant Likely
2011-07-06 9:43 ` [PATCH 1/2] powerpc/5200: mpc5200b.dtsi: add spi node address- and size-cells properties Anatolij Gustschin
2011-07-06 17:27 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305561764-5942-2-git-send-email-agust@denx.de \
--to=agust@denx.de \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=hs@denx.de \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).