From: Artem Bityutskiy <dedekind1@gmail.com>
To: Scott Wood <scottwood@freescale.com>
Cc: Artem.Bityutskiy@nokia.com, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org, shuo.liu@freescale.com,
linux-mtd@lists.infradead.org, akpm@linux-foundation.org,
dwmw2@infradead.org
Subject: Re: [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip
Date: Mon, 12 Dec 2011 23:09:51 +0200 [thread overview]
Message-ID: <1323724195.2297.11.camel@koala> (raw)
In-Reply-To: <4EDEAEB9.6020703@freescale.com>
On Tue, 2011-12-06 at 18:09 -0600, Scott Wood wrote:
> On 12/03/2011 10:31 PM, shuo.liu@freescale.com wrote:
> > From: Liu Shuo <shuo.liu@freescale.com>
> >
> > Freescale FCM controller has a 2K size limitation of buffer RAM. In order
> > to support the Nand flash chip whose page size is larger than 2K bytes,
> > we read/write 2k data repeatedly by issuing FIR_OP_RB/FIR_OP_WB and save
> > them to a large buffer.
> >
> > Signed-off-by: Liu Shuo <shuo.liu@freescale.com>
> > ---
> > v3:
> > -remove page_size of struct fsl_elbc_mtd.
> > -do a oob write by NAND_CMD_RNDIN.
> >
> > drivers/mtd/nand/fsl_elbc_nand.c | 243 ++++++++++++++++++++++++++++++++++----
> > 1 files changed, 218 insertions(+), 25 deletions(-)
>
> What is the plan for bad block marker migration?
Why it should be migrated? I thought that you support 2KiB pages, and
this adds 4 and 8 KiB pages support, which you never supported before.
What is the migration you guys are talking about?
Artem.
next prev parent reply other threads:[~2011-12-12 21:10 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-04 4:31 [PATCH 1/3] mtd/nand : use elbc_fcm_ctrl->oob to set FPAR_MS bit of FPAR shuo.liu
2011-12-04 4:31 ` [PATCH 2/3] mtd/nand : set correct length to FBCR for a non-full-page write shuo.liu
2011-12-04 4:31 ` [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip shuo.liu
2011-12-05 6:47 ` Artem Bityutskiy
2011-12-05 19:46 ` Scott Wood
2011-12-06 11:49 ` Artem Bityutskiy
2011-12-06 11:49 ` Artem Bityutskiy
2011-12-07 0:09 ` Scott Wood
2011-12-07 3:55 ` LiuShuo
2011-12-07 19:11 ` Scott Wood
2011-12-08 10:44 ` LiuShuo
2011-12-08 18:43 ` Scott Wood
2011-12-12 21:09 ` Artem Bityutskiy [this message]
2011-12-12 21:15 ` Scott Wood
2011-12-12 21:19 ` Artem Bityutskiy
2011-12-12 21:30 ` Scott Wood
2011-12-13 2:46 ` LiuShuo
2011-12-14 8:41 ` LiuShuo
2011-12-14 20:15 ` Scott Wood
2011-12-15 4:59 ` Li Yang
2011-12-15 17:32 ` Scott Wood
2011-12-16 2:44 ` LiuShuo
2011-12-16 17:59 ` Scott Wood
2011-12-19 11:05 ` Li Yang
2011-12-19 16:47 ` Scott Wood
2011-12-20 9:08 ` Li Yang
2011-12-20 19:48 ` Scott Wood
2011-12-17 14:35 ` Artem Bityutskiy
2011-12-19 18:38 ` Scott Wood
2011-12-19 18:42 ` Scott Wood
2011-12-14 3:41 ` LiuShuo
2011-12-14 20:53 ` Scott Wood
2011-12-05 6:50 ` [PATCH 1/3] mtd/nand : use elbc_fcm_ctrl->oob to set FPAR_MS bit of FPAR Artem Bityutskiy
-- strict thread matches above, loose matches on Subject: below --
2011-11-24 0:41 b35362
2011-11-24 0:41 ` [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip b35362
2011-11-24 7:37 ` Li Yang-R58472
2011-11-28 17:20 ` Scott Wood
2011-11-24 7:41 ` Artem Bityutskiy
2011-11-24 7:49 ` Li Yang-R58472
2011-11-24 8:16 ` Artem Bityutskiy
2011-11-24 10:02 ` LiuShuo
2011-11-24 11:07 ` Artem Bityutskiy
2011-11-28 21:48 ` Scott Wood
2011-11-28 21:49 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323724195.2297.11.camel@koala \
--to=dedekind1@gmail.com \
--cc=Artem.Bityutskiy@nokia.com \
--cc=akpm@linux-foundation.org \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=scottwood@freescale.com \
--cc=shuo.liu@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).