From: Zhao Chenhui <chenhui.zhao@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>
Subject: [PATCH v3 3/4] fsl_pmc: Add API to enable device as wakeup event source
Date: Thu, 22 Dec 2011 19:43:33 +0800 [thread overview]
Message-ID: <1324554214-19502-3-git-send-email-chenhui.zhao@freescale.com> (raw)
In-Reply-To: <1324554214-19502-1-git-send-email-chenhui.zhao@freescale.com>
Add APIs for setting wakeup source and lossless Ethernet in low power modes.
These APIs can be used by wake-on-packet feature.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
---
arch/powerpc/sysdev/fsl_pmc.c | 70 ++++++++++++++++++++++++++++++++++++++++-
arch/powerpc/sysdev/fsl_soc.h | 9 +++++
2 files changed, 78 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
index 618a52c..0c99591 100644
--- a/arch/powerpc/sysdev/fsl_pmc.c
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -32,6 +32,7 @@ struct pmc_regs {
__be32 powmgtcsr;
#define POWMGTCSR_SLP_MASK 0x00020000
#define POWMGTCSR_DPSLP_MASK 0x00100000
+#define POWMGTCSR_LOSSLESS_MASK 0x00400000
__be32 res3[2];
__be32 pmcdr;
};
@@ -41,6 +42,73 @@ static unsigned int pmc_flag;
#define PMC_SLEEP 0x1
#define PMC_DEEP_SLEEP 0x2
+#define PMC_LOSSLESS 0x4
+
+/**
+ * mpc85xx_pmc_set_wake - enable devices as wakeup event source
+ * @pdev: platform device affected
+ * @enable: True to enable event generation; false to disable
+ *
+ * This enables the device as a wakeup event source, or disables it.
+ *
+ * RETURN VALUE:
+ * 0 is returned on success
+ * -EINVAL is returned if device is not supposed to wake up the system
+ * Error code depending on the platform is returned if both the platform and
+ * the native mechanism fail to enable the generation of wake-up events
+ */
+int mpc85xx_pmc_set_wake(struct platform_device *pdev, bool enable)
+{
+ int ret = 0;
+ struct device_node *clk_np;
+ u32 pmcdr_mask;
+
+ if (!pmc_regs) {
+ pr_err("%s: PMC is unavailable\n", __func__);
+ return -ENODEV;
+ }
+
+ if (enable && !device_may_wakeup(&pdev->dev))
+ return -EINVAL;
+
+ clk_np = of_parse_phandle(pdev->dev.of_node, "clk-handle", 0);
+ if (!clk_np)
+ return -EINVAL;
+
+ if (of_property_read_u32(clk_np, "fsl,pmcdr-mask", &pmcdr_mask)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (enable)
+ /* clear to enable clock in low power mode */
+ clrbits32(&pmc_regs->pmcdr, pmcdr_mask);
+ else
+ setbits32(&pmc_regs->pmcdr, pmcdr_mask);
+
+out:
+ of_node_put(clk_np);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mpc85xx_pmc_set_wake);
+
+/**
+ * mpc85xx_pmc_set_lossless_ethernet - enable lossless ethernet
+ * in (deep) sleep mode
+ * @enable: True to enable event generation; false to disable
+ */
+void mpc85xx_pmc_set_lossless_ethernet(int enable)
+{
+ if (pmc_flag & PMC_LOSSLESS) {
+ if (enable)
+ setbits32(&pmc_regs->powmgtcsr,
+ POWMGTCSR_LOSSLESS_MASK);
+ else
+ clrbits32(&pmc_regs->powmgtcsr,
+ POWMGTCSR_LOSSLESS_MASK);
+ }
+}
+EXPORT_SYMBOL_GPL(mpc85xx_pmc_set_lossless_ethernet);
static int pmc_suspend_enter(suspend_state_t state)
{
@@ -117,7 +185,7 @@ static int pmc_probe(struct platform_device *pdev)
pmc_flag |= PMC_DEEP_SLEEP;
if (of_device_is_compatible(np, "fsl,p1022-pmc"))
- pmc_flag |= PMC_DEEP_SLEEP;
+ pmc_flag |= PMC_DEEP_SLEEP | PMC_LOSSLESS;
suspend_set_ops(&pmc_suspend_ops);
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 949377d..29a87ee 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -3,6 +3,7 @@
#ifdef __KERNEL__
#include <asm/mmu.h>
+#include <linux/platform_device.h>
struct spi_device;
@@ -21,6 +22,14 @@ struct device_node;
extern void fsl_rstcr_restart(char *cmd);
+#ifdef CONFIG_FSL_PMC
+int mpc85xx_pmc_set_wake(struct platform_device *pdev, bool enable);
+void mpc85xx_pmc_set_lossless_ethernet(int enable);
+#else
+#define mpc85xx_pmc_set_wake(pdev, enable)
+#define mpc85xx_pmc_set_lossless_ethernet(enable)
+#endif
+
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
/* The different ports that the DIU can be connected to */
--
1.6.4.1
next prev parent reply other threads:[~2011-12-22 11:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-22 11:43 [PATCH v3 1/4] powerpc/85xx: add HOTPLUG_CPU support Zhao Chenhui
2011-12-22 11:43 ` [PATCH v3 2/4] powerpc/85xx: add sleep and deep sleep support Zhao Chenhui
2011-12-22 11:43 ` Zhao Chenhui [this message]
2011-12-22 11:43 ` [PATCH v3 4/4] fsl_pmc: update device bindings Zhao Chenhui
2011-12-22 18:11 ` Scott Wood
2011-12-22 18:12 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1324554214-19502-3-git-send-email-chenhui.zhao@freescale.com \
--to=chenhui.zhao@freescale.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).