From: Bharat Bhushan <r65777@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<galak@kernel.crashing.org>, <benh@kernel.crashing.org>
Cc: Bharat Bhushan <bharat.bhushan@freescale.com>
Subject: [PATCH] powerpc: Fix assmption of end_of_DRAM() returns end address
Date: Tue, 5 Jun 2012 19:25:04 +0530 [thread overview]
Message-ID: <1338904504-2750-1-git-send-email-bharat.bhushan@freescale.com> (raw)
memblock_end_of_DRAM() returns end_address + 1, not end address.
While some code assumes that it returns end address.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
---
This patch is based on next branch of https://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
arch/powerpc/platforms/44x/currituck.c | 2 +-
arch/powerpc/platforms/85xx/corenet_ds.c | 2 +-
arch/powerpc/platforms/85xx/ge_imp3a.c | 2 +-
arch/powerpc/platforms/85xx/mpc8536_ds.c | 2 +-
arch/powerpc/platforms/85xx/mpc85xx_ds.c | 2 +-
arch/powerpc/platforms/85xx/mpc85xx_mds.c | 2 +-
arch/powerpc/platforms/85xx/p1022_ds.c | 2 +-
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 2 +-
8 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/currituck.c
index 583e67f..9f6c33d 100644
--- a/arch/powerpc/platforms/44x/currituck.c
+++ b/arch/powerpc/platforms/44x/currituck.c
@@ -160,7 +160,7 @@ static void __init ppc47x_setup_arch(void)
/* No need to check the DMA config as we /know/ our windows are all of
* RAM. Lets hope that doesn't change */
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > 0xffffffff) {
+ if ((memblock_end_of_DRAM() - 1) > 0xffffffff) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index dd3617c..925b028 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -77,7 +77,7 @@ void __init corenet_ds_setup_arch(void)
#endif
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/ge_imp3a.c b/arch/powerpc/platforms/85xx/ge_imp3a.c
index 1801462..b6a728b 100644
--- a/arch/powerpc/platforms/85xx/ge_imp3a.c
+++ b/arch/powerpc/platforms/85xx/ge_imp3a.c
@@ -125,7 +125,7 @@ static void __init ge_imp3a_setup_arch(void)
mpc85xx_smp_init();
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 585bd22..767c7cf 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -75,7 +75,7 @@ static void __init mpc8536_ds_setup_arch(void)
#endif
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 1fd91e9..d30f6c4 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -173,7 +173,7 @@ static void __init mpc85xx_ds_setup_arch(void)
mpc85xx_smp_init();
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index d208ebc..8e4b094 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -359,7 +359,7 @@ static void __init mpc85xx_mds_setup_arch(void)
mpc85xx_mds_qe_init();
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index f700c81..74e310b 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -450,7 +450,7 @@ static void __init p1022_ds_setup_arch(void)
mpc85xx_smp_init();
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 3755e61..817245b 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -102,7 +102,7 @@ mpc86xx_hpcn_setup_arch(void)
#endif
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
--
1.7.0.4
next reply other threads:[~2012-06-05 13:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-05 13:55 Bharat Bhushan [this message]
2012-06-05 22:17 ` [PATCH] powerpc: Fix assmption of end_of_DRAM() returns end address Benjamin Herrenschmidt
2012-06-05 22:20 ` David Miller
2012-06-06 0:46 ` Bhushan Bharat-R65777
2012-06-06 5:30 ` Benjamin Herrenschmidt
2012-06-06 13:14 ` Andrea Arcangeli
2012-06-06 16:03 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338904504-2750-1-git-send-email-bharat.bhushan@freescale.com \
--to=r65777@freescale.com \
--cc=benh@kernel.crashing.org \
--cc=bharat.bhushan@freescale.com \
--cc=galak@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).