[PATCH 16/31] powerpc/eeh: EEH backend for P7IOC

[Gavin Shan <shangw@linux.vnet.ibm.com>]

For EEH on PowerNV platform, the overall architecture is different
from that on pSeries platform. In order to support multiple I/O chips
in future, we split EEH to 3 layers for PowerNV platform: EEH core,
platform layer, I/O layer. It would give EEH implementation on PowerNV
platform much more flexibility in future.

The patch adds the EEH backend for P7IOC.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/powernv/Makefile   |    1 +
 arch/powerpc/platforms/powernv/eeh-ioda.c |   45 +++++++++++++++++++++++++++++
 arch/powerpc/platforms/powernv/pci.h      |   23 +++++++++++++++
 3 files changed, 69 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/platforms/powernv/eeh-ioda.c

diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index bcc3cb4..09bd0cb 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -3,3 +3,4 @@ obj-y			+= opal-rtc.o opal-nvram.o
 
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
+obj-$(CONFIG_EEH)	+= eeh-ioda.o
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
new file mode 100644
index 0000000..f12e888
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -0,0 +1,45 @@
+/*
+ * The file intends to implement the functions needed by EEH, which is
+ * built on IODA compliant chip. Actually, lots of functions related
+ * to EEH would be built based on the OPAL APIs.
+ *
+ * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/bootmem.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/msi.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+
+#include <asm/eeh.h>
+#include <asm/eeh_event.h>
+#include <asm/io.h>
+#include <asm/iommu.h>
+#include <asm/msi_bitmap.h>
+#include <asm/opal.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+#include <asm/tce.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+struct pnv_eeh_ops ioda_eeh_ops = {
+	.post_init		= NULL,
+	.set_option		= NULL,
+	.get_state		= NULL,
+	.reset			= NULL,
+	.get_log		= NULL,
+	.configure_bridge	= NULL,
+	.next_error		= NULL
+};
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 25d76c4..336c9dc 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -66,15 +66,35 @@ struct pnv_ioda_pe {
 	struct list_head	list;
 };
 
+/* IOC dependent EEH operations */
+#ifdef CONFIG_EEH
+struct pnv_eeh_ops {
+	int (*post_init)(struct pci_controller *hose);
+	int (*set_option)(struct eeh_pe *pe, int option);
+	int (*get_state)(struct eeh_pe *pe);
+	int (*reset)(struct eeh_pe *pe, int option);
+	int (*get_log)(struct eeh_pe *pe, int severity,
+		       char *drv_log, unsigned long len);
+	int (*configure_bridge)(struct eeh_pe *pe);
+	int (*next_error)(struct eeh_pe **pe);
+};
+#endif /* CONFIG_EEH */
+
 struct pnv_phb {
 	struct pci_controller	*hose;
 	enum pnv_phb_type	type;
 	enum pnv_phb_model	model;
+	u64			hub_id;
 	u64			opal_id;
 	void __iomem		*regs;
 	int			initialized;
 	spinlock_t		lock;
 
+#ifdef CONFIG_EEH
+	struct pnv_eeh_ops	*eeh_ops;
+	int			eeh_enabled;
+#endif
+
 #ifdef CONFIG_PCI_MSI
 	unsigned int		msi_base;
 	unsigned int		msi32_support;
@@ -150,6 +170,9 @@ struct pnv_phb {
 };
 
 extern struct pci_ops pnv_pci_ops;
+#ifdef CONFIG_EEH
+extern struct pnv_eeh_ops ioda_eeh_ops;
+#endif
 
 extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
 				      void *tce_mem, u64 tce_size,
-- 
1.7.5.4