From: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
To: herbert@gondor.apana.org.au
Cc: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
linux-crypto@vger.kernel.org
Subject: [PATCH 08/10] crypto: nx - fix XCBC for zero length messages
Date: Fri, 23 Aug 2013 17:01:12 -0300 [thread overview]
Message-ID: <1377288074-18998-9-git-send-email-mhcerri@linux.vnet.ibm.com> (raw)
In-Reply-To: <1377288074-18998-1-git-send-email-mhcerri@linux.vnet.ibm.com>
The NX XCBC implementation doesn't support zero length messages and
because of that NX is currently returning a hard-coded hash for zero
length messages. However this approach is incorrect since the hash value
also depends on which key is used.
This patch removes the hard-coded hash and replace it with an
implementation based on the RFC 3566 using ECB.
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
---
drivers/crypto/nx/nx-aes-xcbc.c | 84 +++++++++++++++++++++++++++++++++++++----
1 file changed, 77 insertions(+), 7 deletions(-)
diff --git a/drivers/crypto/nx/nx-aes-xcbc.c b/drivers/crypto/nx/nx-aes-xcbc.c
index 1a5d9e3..03c4bf5 100644
--- a/drivers/crypto/nx/nx-aes-xcbc.c
+++ b/drivers/crypto/nx/nx-aes-xcbc.c
@@ -56,6 +56,77 @@ static int nx_xcbc_set_key(struct crypto_shash *desc,
return 0;
}
+/*
+ * Based on RFC 3566, for a zero-length message:
+ *
+ * n = 1
+ * K1 = E(K, 0x01010101010101010101010101010101)
+ * K3 = E(K, 0x03030303030303030303030303030303)
+ * E[0] = 0x00000000000000000000000000000000
+ * M[1] = 0x80000000000000000000000000000000 (0 length message with padding)
+ * E[1] = (K1, M[1] ^ E[0] ^ K3)
+ * Tag = M[1]
+ */
+static int nx_xcbc_empty(struct shash_desc *desc, u8 *out)
+{
+ struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+ struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+ struct nx_sg *in_sg, *out_sg;
+ u8 keys[2][AES_BLOCK_SIZE];
+ u8 key[32];
+ int rc = 0;
+
+ /* Change to ECB mode */
+ csbcpb->cpb.hdr.mode = NX_MODE_AES_ECB;
+ memcpy(key, csbcpb->cpb.aes_xcbc.key, AES_BLOCK_SIZE);
+ memcpy(csbcpb->cpb.aes_ecb.key, key, AES_BLOCK_SIZE);
+ NX_CPB_FDM(csbcpb) |= NX_FDM_ENDE_ENCRYPT;
+
+ /* K1 and K3 base patterns */
+ memset(keys[0], 0x01, sizeof(keys[0]));
+ memset(keys[1], 0x03, sizeof(keys[1]));
+
+ /* Generate K1 and K3 encrypting the patterns */
+ in_sg = nx_build_sg_list(nx_ctx->in_sg, (u8 *) keys, sizeof(keys),
+ nx_ctx->ap->sglen);
+ out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *) keys, sizeof(keys),
+ nx_ctx->ap->sglen);
+ nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) * sizeof(struct nx_sg);
+ nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
+ rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+ desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+ if (rc)
+ goto out;
+ atomic_inc(&(nx_ctx->stats->aes_ops));
+
+ /* XOr K3 with the padding for a 0 length message */
+ keys[1][0] ^= 0x80;
+
+ /* Encrypt the final result */
+ memcpy(csbcpb->cpb.aes_ecb.key, keys[0], AES_BLOCK_SIZE);
+ in_sg = nx_build_sg_list(nx_ctx->in_sg, (u8 *) keys[1], sizeof(keys[1]),
+ nx_ctx->ap->sglen);
+ out_sg = nx_build_sg_list(nx_ctx->out_sg, out, AES_BLOCK_SIZE,
+ nx_ctx->ap->sglen);
+ nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) * sizeof(struct nx_sg);
+ nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
+ rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+ desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+ if (rc)
+ goto out;
+ atomic_inc(&(nx_ctx->stats->aes_ops));
+
+out:
+ /* Restore XCBC mode */
+ csbcpb->cpb.hdr.mode = NX_MODE_AES_XCBC_MAC;
+ memcpy(csbcpb->cpb.aes_xcbc.key, key, AES_BLOCK_SIZE);
+ NX_CPB_FDM(csbcpb) &= ~NX_FDM_ENDE_ENCRYPT;
+
+ return rc;
+}
+
static int nx_xcbc_init(struct shash_desc *desc)
{
struct xcbc_state *sctx = shash_desc_ctx(desc);
@@ -201,13 +272,12 @@ static int nx_xcbc_final(struct shash_desc *desc, u8 *out)
memcpy(csbcpb->cpb.aes_xcbc.cv,
csbcpb->cpb.aes_xcbc.out_cv_mac, AES_BLOCK_SIZE);
} else if (sctx->count == 0) {
- /* we've never seen an update, so this is a 0 byte op. The
- * hardware cannot handle a 0 byte op, so just copy out the
- * known 0 byte result. This is cheaper than allocating a
- * software context to do a 0 byte op */
- u8 data[] = { 0x75, 0xf0, 0x25, 0x1d, 0x52, 0x8a, 0xc0, 0x1c,
- 0x45, 0x73, 0xdf, 0xd5, 0x84, 0xd7, 0x9f, 0x29 };
- memcpy(out, data, sizeof(data));
+ /*
+ * we've never seen an update, so this is a 0 byte op. The
+ * hardware cannot handle a 0 byte op, so just ECB to
+ * generate the hash.
+ */
+ rc = nx_xcbc_empty(desc, out);
goto out;
}
--
1.7.12
next prev parent reply other threads:[~2013-08-23 20:01 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-23 20:01 [PATCH 00/10] Series of fixes for NX driver Marcelo Cerri
2013-08-23 20:01 ` [PATCH 01/10] crypto: nx - add offset to nx_build_sg_lists() Marcelo Cerri
2013-08-23 20:01 ` [PATCH 02/10] crypto: nx - fix limits to sg lists for AES-ECB Marcelo Cerri
2013-08-23 20:01 ` [PATCH 03/10] crypto: nx - fix limits to sg lists for AES-CBC Marcelo Cerri
2013-08-29 4:42 ` Herbert Xu
2013-08-29 14:32 ` Marcelo Cerri
2013-08-23 20:01 ` [PATCH 04/10] crypto: nx - fix limits to sg lists for AES-CTR Marcelo Cerri
2013-08-23 20:01 ` [PATCH 05/10] crypto: nx - fix limits to sg lists for AES-GCM Marcelo Cerri
2013-08-23 20:01 ` [PATCH 06/10] crypto: nx - fix limits to sg lists for AES-XCBC Marcelo Cerri
2013-08-23 20:01 ` [PATCH 07/10] crypto: nx - fix limits to sg lists for AES-CCM Marcelo Cerri
2013-08-23 20:01 ` Marcelo Cerri [this message]
2013-08-23 20:01 ` [PATCH 09/10] crypto: nx - fix GCM for zero length messages Marcelo Cerri
2013-08-23 20:01 ` [PATCH 10/10] crypto: nx - fix SHA-2 for chunks bigger than block size Marcelo Cerri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377288074-18998-9-git-send-email-mhcerri@linux.vnet.ibm.com \
--to=mhcerri@linux.vnet.ibm.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).