From: Alistair Popple <alistair@popple.id.au>
To: benh@kernel.crashing.org
Cc: netdev@vger.kernel.org, linux-usb@vger.kernel.org,
linux-mmc@vger.kernel.org, linuxppc-dev@ozlabs.org,
stern@rowland.harvard.edu,
Alistair Popple <alistair@popple.id.au>,
cjb@laptop.org, davem@davemloft.net
Subject: [PATCH 0/8] IBM Akebono/PPC476GTR Support
Date: Fri, 22 Nov 2013 13:07:37 +1100 [thread overview]
Message-ID: <1385086057-10884-1-git-send-email-alistair@popple.id.au> (raw)
The IBM Akebono board is a development board for the new PPC476GTR
system on chip (SoC).
Changes from V1:
* Update device-tree compatible strings to reflect the name of the
SoC rather than the board when those components are integrated into
the SoC.
* Updates to allow the new EMAC PHY interface to be compile tested.
* Rather than adding a new compatible string for EHCI support
usb-ehci is used and the corresponding driver (ehci-ppc-of)
is merged into the generic EHCI platform driver.
* A generic (usb-ohci) compatible string is used for OHCI.
* PCI MSI support has been added via the HSTA module.
Alistair Popple (8):
IBM Akebono: Add support to AHCI platform driver
IBM Akebono: Add a SDHCI platform driver
IBM Akebono: Add support for a new PHY interface to the IBM emac
driver
IBM Akebono: Add support to the OHCI platform driver for PPC476GTR
ECHI Platform: Merge ppc-of EHCI driver into the ehci-platform driver
IBM Currituck: Clean up board specific code before adding Akebono
code
IBM Akebono: Add the Akebono platform
powerpc: Added PCI MSI support using the HSTA module
.../devicetree/bindings/powerpc/4xx/akebono.txt | 54 +++
.../devicetree/bindings/powerpc/4xx/emac.txt | 9 +
arch/powerpc/boot/Makefile | 3 +
arch/powerpc/boot/dcr.h | 4 +
arch/powerpc/boot/dts/akebono.dts | 415 ++++++++++++++++++++
arch/powerpc/boot/treeboot-akebono.c | 179 +++++++++
arch/powerpc/boot/wrapper | 3 +
arch/powerpc/configs/44x/akebono_defconfig | 148 +++++++
arch/powerpc/platforms/44x/Kconfig | 32 +-
arch/powerpc/platforms/44x/Makefile | 3 +-
arch/powerpc/platforms/44x/currituck.c | 233 -----------
arch/powerpc/platforms/44x/ppc476.c | 299 ++++++++++++++
arch/powerpc/sysdev/Kconfig | 6 +
arch/powerpc/sysdev/Makefile | 1 +
arch/powerpc/sysdev/ppc4xx_hsta_msi.c | 266 +++++++++++++
arch/powerpc/sysdev/ppc4xx_pci.c | 41 +-
arch/powerpc/sysdev/ppc4xx_pci.h | 4 +-
drivers/ata/ahci_platform.c | 1 +
drivers/mmc/host/Kconfig | 12 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-of-476gtr.c | 60 +++
drivers/net/ethernet/ibm/emac/Kconfig | 4 +
drivers/net/ethernet/ibm/emac/Makefile | 1 +
drivers/net/ethernet/ibm/emac/core.c | 50 ++-
drivers/net/ethernet/ibm/emac/core.h | 12 +
drivers/net/ethernet/ibm/emac/rgmii_wol.c | 243 ++++++++++++
drivers/net/ethernet/ibm/emac/rgmii_wol.h | 62 +++
drivers/usb/host/Kconfig | 7 +-
drivers/usb/host/ehci-hcd.c | 5 -
drivers/usb/host/ehci-platform.c | 86 +++-
drivers/usb/host/ehci-ppc-of.c | 236 -----------
drivers/usb/host/ohci-platform.c | 22 +-
32 files changed, 1992 insertions(+), 510 deletions(-)
create mode 100644 Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
create mode 100644 arch/powerpc/boot/dts/akebono.dts
create mode 100644 arch/powerpc/boot/treeboot-akebono.c
create mode 100644 arch/powerpc/configs/44x/akebono_defconfig
delete mode 100644 arch/powerpc/platforms/44x/currituck.c
create mode 100644 arch/powerpc/platforms/44x/ppc476.c
create mode 100644 arch/powerpc/sysdev/ppc4xx_hsta_msi.c
create mode 100644 drivers/mmc/host/sdhci-of-476gtr.c
create mode 100644 drivers/net/ethernet/ibm/emac/rgmii_wol.c
create mode 100644 drivers/net/ethernet/ibm/emac/rgmii_wol.h
delete mode 100644 drivers/usb/host/ehci-ppc-of.c
--
1.7.10.4
next reply other threads:[~2013-11-22 2:08 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-22 2:07 Alistair Popple [this message]
2013-11-22 2:08 ` [PATCH 1/8] IBM Akebono: Add support to AHCI platform driver Alistair Popple
2013-11-22 22:24 ` Tejun Heo
2013-11-22 2:08 ` [PATCH 2/8] IBM Akebono: Add a SDHCI " Alistair Popple
2013-12-17 1:11 ` Alistair Popple
2013-11-22 2:08 ` [PATCH 3/8] IBM Akebono: Add support for a new PHY interface to the IBM emac driver Alistair Popple
2013-12-05 4:49 ` Benjamin Herrenschmidt
2013-11-22 2:08 ` [PATCH 4/8] IBM Akebono: Add support to the OHCI platform driver for PPC476GTR Alistair Popple
2014-01-11 1:27 ` Sergei Shtylyov
2014-01-11 0:52 ` Greg KH
2014-01-11 1:06 ` Benjamin Herrenschmidt
2014-01-12 23:54 ` Alistair Popple
2013-11-22 2:08 ` [PATCH 5/8] ECHI Platform: Merge ppc-of EHCI driver into the ehci-platform driver Alistair Popple
2013-11-22 2:08 ` [PATCH 6/8] IBM Currituck: Clean up board specific code before adding Akebono code Alistair Popple
2013-11-22 2:08 ` [PATCH 7/8] IBM Akebono: Add the Akebono platform Alistair Popple
2013-11-22 2:08 ` [PATCH 8/8] powerpc: Added PCI MSI support using the HSTA module Alistair Popple
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1385086057-10884-1-git-send-email-alistair@popple.id.au \
--to=alistair@popple.id.au \
--cc=benh@kernel.crashing.org \
--cc=cjb@laptop.org \
--cc=davem@davemloft.net \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).