From: Zhao Qiang <B45475@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>, <B07421@freescale.com>
Cc: Zhao Qiang <B45475@freescale.com>, R63061@freescale.com
Subject: [PATCH] T1040RDB: add qe node for T1040RDB dts
Date: Wed, 12 Mar 2014 16:26:02 +0800 [thread overview]
Message-ID: <1394612762-36308-1-git-send-email-B45475@freescale.com> (raw)
Signed-off-by: Zhao Qiang <B45475@freescale.com>
---
arch/powerpc/boot/dts/t1040rdb.dts | 43 ++++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/powerpc/boot/dts/t1040rdb.dts b/arch/powerpc/boot/dts/t1040rdb.dts
index e2eee18..6ff0412 100644
--- a/arch/powerpc/boot/dts/t1040rdb.dts
+++ b/arch/powerpc/boot/dts/t1040rdb.dts
@@ -268,6 +268,49 @@
fsl,fman-mac = <&enet4>;
};
};
+
+ qe: qe@ffe139999 {
+ ranges = <0x0 0xf 0xfe140000 0x40000>;
+ reg = <0xf 0xfe140000 0 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+
+ si1: si@700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,qe-si";
+ reg = <0x700 0x80>;
+ };
+
+ siram1: siram@1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-siram";
+ reg = <0x1000 0x800>;
+ };
+
+ tdma: ucc@2000 {
+ compatible = "fsl,ucc-tdm";
+ rx-clock-name = "clk3";
+ tx-clock-name = "clk4";
+ fsl,rx-sync-clock = "rsync_pin";
+ fsl,tx-sync-clock = "tsync_pin";
+ fsl,tx-timeslot = <0xfffffffe>;
+ fsl,rx-timeslot = <0xfffffffe>;
+ fsl,tdm-framer-type = "e1";
+ fsl,tdm-mode = "normal";
+ fsl,tdm-id = <0>;
+ fsl,siram-entry-id = <0>;
+ };
+
+ serial: ucc@2200 {
+ device_type = "serial";
+ compatible = "ucc_uart";
+ port-number = <1>;
+ rx-clock-name = "brg2";
+ tx-clock-name = "brg2";
+ };
+ };
};
/include/ "fsl/t1040si-post.dtsi"
/include/ "fsl/qoriq-dpaa-res3.dtsi"
--
1.8.5
next reply other threads:[~2014-03-12 8:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-12 8:26 Zhao Qiang [this message]
2014-03-12 18:36 ` [PATCH] T1040RDB: add qe node for T1040RDB dts Scott Wood
2014-03-12 18:45 ` Scott Wood
2014-03-13 1:56 ` qiang.zhao
2014-03-20 0:51 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394612762-36308-1-git-send-email-B45475@freescale.com \
--to=b45475@freescale.com \
--cc=B07421@freescale.com \
--cc=R63061@freescale.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).