From: Alexander Popov <a13xp0p0v88@gmail.com>
To: Gerhard Sittig <gsi@denx.de>,
Dan Williams <dan.j.williams@intel.com>,
Vinod Koul <vinod.koul@intel.com>,
Lars-Peter Clausen <lars@metafoo.de>,
Arnd Bergmann <arnd@arndb.de>, Anatolij Gustschin <agust@denx.de>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Alexander Popov <a13xp0p0v88@gmail.com>,
linuxppc-dev@lists.ozlabs.org, dmaengine@vger.kernel.org
Subject: [PATCH RFC v10 1/6] dma: mpc512x: reorder mpc8308 specific instructions
Date: Thu, 20 Mar 2014 18:47:53 +0400 [thread overview]
Message-ID: <1395326878-25243-2-git-send-email-a13xp0p0v88@gmail.com> (raw)
In-Reply-To: <1395326878-25243-1-git-send-email-a13xp0p0v88@gmail.com>
Concentrate the specific code for MPC8308 in the 'if' branch
and handle MPC512x in the 'else' branch.
This modification only reorders instructions but doesn't change behaviour.
Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Gerhard Sittig <gsi@denx.de>
---
drivers/dma/mpc512x_dma.c | 42 +++++++++++++++++++++++++-----------------
1 file changed, 25 insertions(+), 17 deletions(-)
diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
index 448750d..2ce248b 100644
--- a/drivers/dma/mpc512x_dma.c
+++ b/drivers/dma/mpc512x_dma.c
@@ -52,9 +52,17 @@
#define MPC_DMA_DESCRIPTORS 64
/* Macro definitions */
-#define MPC_DMA_CHANNELS 64
#define MPC_DMA_TCD_OFFSET 0x1000
+/*
+ * Maximum channel counts for individual hardware variants
+ * and the maximum channel count over all supported controllers,
+ * used for data structure size
+ */
+#define MPC8308_DMACHAN_MAX 16
+#define MPC512x_DMACHAN_MAX 64
+#define MPC_DMA_CHANNELS 64
+
/* Arbitration mode of group and channel */
#define MPC_DMA_DMACR_EDCG (1 << 31)
#define MPC_DMA_DMACR_ERGA (1 << 3)
@@ -710,10 +718,10 @@ static int mpc_dma_probe(struct platform_device *op)
dma = &mdma->dma;
dma->dev = dev;
- if (!mdma->is_mpc8308)
- dma->chancnt = MPC_DMA_CHANNELS;
+ if (mdma->is_mpc8308)
+ dma->chancnt = MPC8308_DMACHAN_MAX;
else
- dma->chancnt = 16; /* MPC8308 DMA has only 16 channels */
+ dma->chancnt = MPC512x_DMACHAN_MAX;
dma->device_alloc_chan_resources = mpc_dma_alloc_chan_resources;
dma->device_free_chan_resources = mpc_dma_free_chan_resources;
dma->device_issue_pending = mpc_dma_issue_pending;
@@ -747,7 +755,19 @@ static int mpc_dma_probe(struct platform_device *op)
* - Round-robin group arbitration,
* - Round-robin channel arbitration.
*/
- if (!mdma->is_mpc8308) {
+ if (mdma->is_mpc8308) {
+ /* MPC8308 has 16 channels and lacks some registers */
+ out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA);
+
+ /* enable snooping */
+ out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE);
+ /* Disable error interrupts */
+ out_be32(&mdma->regs->dmaeeil, 0);
+
+ /* Clear interrupts status */
+ out_be32(&mdma->regs->dmaintl, 0xFFFF);
+ out_be32(&mdma->regs->dmaerrl, 0xFFFF);
+ } else {
out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_EDCG |
MPC_DMA_DMACR_ERGA | MPC_DMA_DMACR_ERCA);
@@ -768,18 +788,6 @@ static int mpc_dma_probe(struct platform_device *op)
/* Route interrupts to IPIC */
out_be32(&mdma->regs->dmaihsa, 0);
out_be32(&mdma->regs->dmailsa, 0);
- } else {
- /* MPC8308 has 16 channels and lacks some registers */
- out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA);
-
- /* enable snooping */
- out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE);
- /* Disable error interrupts */
- out_be32(&mdma->regs->dmaeeil, 0);
-
- /* Clear interrupts status */
- out_be32(&mdma->regs->dmaintl, 0xFFFF);
- out_be32(&mdma->regs->dmaerrl, 0xFFFF);
}
/* Register DMA engine */
--
1.8.4.2
next prev parent reply other threads:[~2014-03-20 14:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-20 14:47 [PATCH RFC v10 0/6] MPC512x DMA slave s/g support, OF DMA lookup Alexander Popov
2014-03-20 14:47 ` Alexander Popov [this message]
2014-03-20 14:47 ` [PATCH RFC v10 2/6] dma: mpc512x: add support for peripheral transfers Alexander Popov
2014-03-20 14:47 ` [PATCH RFC v10 3/6] dma: mpc512x: fix freeing resources in mpc_dma_probe() and mpc_dma_remove() Alexander Popov
2014-03-20 14:47 ` [PATCH RFC v10 4/6] dma: of: Add common xlate function for matching by channel id Alexander Popov
2014-03-20 14:47 ` [PATCH RFC v10 5/6] dma: mpc512x: add device tree binding document Alexander Popov
2014-03-20 14:47 ` [PATCH RFC v10 6/6] dma: mpc512x: register for device tree channel lookup Alexander Popov
2014-04-02 17:53 ` [PATCH RFC v10 0/6] MPC512x DMA slave s/g support, OF DMA lookup Alexander Popov
2014-04-03 10:59 ` Alexander Popov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395326878-25243-2-git-send-email-a13xp0p0v88@gmail.com \
--to=a13xp0p0v88@gmail.com \
--cc=agust@denx.de \
--cc=andriy.shevchenko@linux.intel.com \
--cc=arnd@arndb.de \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=gsi@denx.de \
--cc=lars@metafoo.de \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).