From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: agraf@suse.de, benh@kernel.crashing.org, paulus@samba.org
Cc: linuxppc-dev@lists.ozlabs.org, kvm@vger.kernel.org,
kvm-ppc@vger.kernel.org,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH V6 2/2] KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler
Date: Mon, 12 May 2014 17:04:06 +0530 [thread overview]
Message-ID: <1399894447-11322-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
In-Reply-To: <1399894447-11322-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com>
Use make_dsisr instead of open coding it. This also have
the added benefit of handling alignment interrupt on additional
instructions.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/disassemble.h | 34 +++++++++++++++++++++++++++++
arch/powerpc/kernel/align.c | 34 +----------------------------
arch/powerpc/kvm/book3s_emulate.c | 39 +---------------------------------
3 files changed, 36 insertions(+), 71 deletions(-)
diff --git a/arch/powerpc/include/asm/disassemble.h b/arch/powerpc/include/asm/disassemble.h
index 856f8deb557a..6330a61b875a 100644
--- a/arch/powerpc/include/asm/disassemble.h
+++ b/arch/powerpc/include/asm/disassemble.h
@@ -81,4 +81,38 @@ static inline unsigned int get_oc(u32 inst)
{
return (inst >> 11) & 0x7fff;
}
+
+#define IS_XFORM(inst) (get_op(inst) == 31)
+#define IS_DSFORM(inst) (get_op(inst) >= 56)
+
+/*
+ * Create a DSISR value from the instruction
+ */
+static inline unsigned make_dsisr(unsigned instr)
+{
+ unsigned dsisr;
+
+
+ /* bits 6:15 --> 22:31 */
+ dsisr = (instr & 0x03ff0000) >> 16;
+
+ if (IS_XFORM(instr)) {
+ /* bits 29:30 --> 15:16 */
+ dsisr |= (instr & 0x00000006) << 14;
+ /* bit 25 --> 17 */
+ dsisr |= (instr & 0x00000040) << 8;
+ /* bits 21:24 --> 18:21 */
+ dsisr |= (instr & 0x00000780) << 3;
+ } else {
+ /* bit 5 --> 17 */
+ dsisr |= (instr & 0x04000000) >> 12;
+ /* bits 1: 4 --> 18:21 */
+ dsisr |= (instr & 0x78000000) >> 17;
+ /* bits 30:31 --> 12:13 */
+ if (IS_DSFORM(instr))
+ dsisr |= (instr & 0x00000003) << 18;
+ }
+
+ return dsisr;
+}
#endif /* __ASM_PPC_DISASSEMBLE_H__ */
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 94908af308d8..34f55524d456 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -25,14 +25,13 @@
#include <asm/cputable.h>
#include <asm/emulated_ops.h>
#include <asm/switch_to.h>
+#include <asm/disassemble.h>
struct aligninfo {
unsigned char len;
unsigned char flags;
};
-#define IS_XFORM(inst) (((inst) >> 26) == 31)
-#define IS_DSFORM(inst) (((inst) >> 26) >= 56)
#define INVALID { 0, 0 }
@@ -192,37 +191,6 @@ static struct aligninfo aligninfo[128] = {
};
/*
- * Create a DSISR value from the instruction
- */
-static inline unsigned make_dsisr(unsigned instr)
-{
- unsigned dsisr;
-
-
- /* bits 6:15 --> 22:31 */
- dsisr = (instr & 0x03ff0000) >> 16;
-
- if (IS_XFORM(instr)) {
- /* bits 29:30 --> 15:16 */
- dsisr |= (instr & 0x00000006) << 14;
- /* bit 25 --> 17 */
- dsisr |= (instr & 0x00000040) << 8;
- /* bits 21:24 --> 18:21 */
- dsisr |= (instr & 0x00000780) << 3;
- } else {
- /* bit 5 --> 17 */
- dsisr |= (instr & 0x04000000) >> 12;
- /* bits 1: 4 --> 18:21 */
- dsisr |= (instr & 0x78000000) >> 17;
- /* bits 30:31 --> 12:13 */
- if (IS_DSFORM(instr))
- dsisr |= (instr & 0x00000003) << 18;
- }
-
- return dsisr;
-}
-
-/*
* The dcbz (data cache block zero) instruction
* gives an alignment fault if used on non-cacheable
* memory. We handle the fault mainly for the
diff --git a/arch/powerpc/kvm/book3s_emulate.c b/arch/powerpc/kvm/book3s_emulate.c
index 5d0f71663b99..6bbdb3d1ec77 100644
--- a/arch/powerpc/kvm/book3s_emulate.c
+++ b/arch/powerpc/kvm/book3s_emulate.c
@@ -569,44 +569,7 @@ unprivileged:
u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst)
{
- u32 dsisr = 0;
-
- /*
- * This is what the spec says about DSISR bits (not mentioned = 0):
- *
- * 12:13 [DS] Set to bits 30:31
- * 15:16 [X] Set to bits 29:30
- * 17 [X] Set to bit 25
- * [D/DS] Set to bit 5
- * 18:21 [X] Set to bits 21:24
- * [D/DS] Set to bits 1:4
- * 22:26 Set to bits 6:10 (RT/RS/FRT/FRS)
- * 27:31 Set to bits 11:15 (RA)
- */
-
- switch (get_op(inst)) {
- /* D-form */
- case OP_LFS:
- case OP_LFD:
- case OP_STFD:
- case OP_STFS:
- dsisr |= (inst >> 12) & 0x4000; /* bit 17 */
- dsisr |= (inst >> 17) & 0x3c00; /* bits 18:21 */
- break;
- /* X-form */
- case 31:
- dsisr |= (inst << 14) & 0x18000; /* bits 15:16 */
- dsisr |= (inst << 8) & 0x04000; /* bit 17 */
- dsisr |= (inst << 3) & 0x03c00; /* bits 18:21 */
- break;
- default:
- printk(KERN_INFO "KVM: Unaligned instruction 0x%x\n", inst);
- break;
- }
-
- dsisr |= (inst >> 16) & 0x03ff; /* bits 22:31 */
-
- return dsisr;
+ return make_dsisr(inst);
}
ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst)
--
1.9.1
next prev parent reply other threads:[~2014-05-12 11:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-12 11:34 [PATCH V6 1/2] KVM: PPC: BOOK3S: Always use the saved DAR value Aneesh Kumar K.V
2014-05-12 11:34 ` Aneesh Kumar K.V [this message]
2014-05-12 13:01 ` Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399894447-11322-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=agraf@suse.de \
--cc=benh@kernel.crashing.org \
--cc=kvm-ppc@vger.kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).