From: Wei Yang <weiyang@linux.vnet.ibm.com>
To: bhelgaas@google.com, benh@au1.ibm.com, gwshan@linux.vnet.ibm.com,
linux-pci@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Cc: Wei Yang <weiyang@linux.vnet.ibm.com>
Subject: [PATCH V9 17/18] powerpc/powernv: Expanding IOV BAR, with m64_per_iov supported
Date: Sun, 2 Nov 2014 23:41:33 +0800 [thread overview]
Message-ID: <1414942894-17034-18-git-send-email-weiyang@linux.vnet.ibm.com> (raw)
In-Reply-To: <1414942894-17034-1-git-send-email-weiyang@linux.vnet.ibm.com>
M64 aperture size is limited on PHB3. When the IOV BAR is too big, this will
exceed the limitation and failed to be assigned.
This patch introduce a different expanding based on the IOV BAR size:
IOV BAR size is smaller than 64M, expand to total_pe.
IOV BAR size is bigger than 64M, roundup power2.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/pci-bridge.h | 2 ++
arch/powerpc/platforms/powernv/pci-ioda.c | 31 +++++++++++++++++++++++++++--
2 files changed, 31 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 8d8d40a..a336c7a 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -176,6 +176,8 @@ struct pci_dn {
u16 max_vfs; /* number of VFs IOV BAR expended */
u16 vf_pes; /* VF PE# under this PF */
int offset; /* PE# for the first VF PE */
+#define M64_PER_IOV 4
+ int m64_per_iov;
#define IODA_INVALID_M64 (-1)
int m64_wins[PCI_SRIOV_NUM_BARS];
#endif /* CONFIG_PCI_IOV */
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 649f49d4..a4e78ab 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -2059,6 +2059,7 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
int i;
resource_size_t size;
struct pci_dn *pdn;
+ int mul, total_vfs;
if (!pdev->is_physfn || pdev->is_added)
return;
@@ -2069,6 +2070,32 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
pdn = pci_get_pdn(pdev);
pdn->max_vfs = 0;
+ total_vfs = pci_sriov_get_totalvfs(pdev);
+ pdn->m64_per_iov = 1;
+ mul = phb->ioda.total_pe;
+
+ for (i = PCI_IOV_RESOURCES; i <= PCI_IOV_RESOURCE_END; i++) {
+ res = &pdev->resource[i];
+ if (!res->flags || res->parent)
+ continue;
+ if (!pnv_pci_is_mem_pref_64(res->flags)) {
+ dev_warn(&pdev->dev, " non M64 IOV BAR %pR on %s\n",
+ res, pci_name(pdev));
+ continue;
+ }
+
+ size = pci_iov_resource_size(pdev, i);
+
+ /* bigger than 64M */
+ if (size > (1 << 26)) {
+ dev_info(&pdev->dev, "PowerNV: VF BAR[%d] size "
+ "is bigger than 64M, roundup power2\n", i);
+ pdn->m64_per_iov = M64_PER_IOV;
+ mul = __roundup_pow_of_two(total_vfs);
+ break;
+ }
+ }
+
for (i = PCI_IOV_RESOURCES; i <= PCI_IOV_RESOURCE_END; i++) {
res = &pdev->resource[i];
if (!res->flags || res->parent)
@@ -2081,10 +2108,10 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
dev_dbg(&pdev->dev, " Fixing VF BAR[%d] %pR to\n", i, res);
size = pci_iov_resource_size(pdev, i);
- res->end = res->start + size * phb->ioda.total_pe - 1;
+ res->end = res->start + size * mul - 1;
dev_dbg(&pdev->dev, " %pR\n", res);
}
- pdn->max_vfs = phb->ioda.total_pe;
+ pdn->max_vfs = mul;
}
static void pnv_pci_ioda_fixup_sriov(struct pci_bus *bus)
--
1.7.9.5
next prev parent reply other threads:[~2014-11-02 15:42 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-02 15:41 [PATCH V9 00/18] Enable SRIOV on PowerNV Wei Yang
2014-11-02 15:41 ` [PATCH V9 01/18] PCI/IOV: Export interface for retrieve VF's BDF Wei Yang
2014-11-19 23:35 ` Bjorn Helgaas
2014-11-02 15:41 ` [PATCH V9 02/18] PCI: Add weak pcibios_iov_resource_alignment() interface Wei Yang
2014-11-02 15:41 ` [PATCH V9 03/18] PCI: Add weak pcibios_iov_resource_size() interface Wei Yang
2014-11-19 1:12 ` Bjorn Helgaas
2014-11-19 2:15 ` Benjamin Herrenschmidt
2014-11-19 3:21 ` Wei Yang
2014-11-19 4:26 ` Bjorn Helgaas
2014-11-19 9:27 ` Wei Yang
2014-11-19 17:23 ` Bjorn Helgaas
2014-11-19 20:51 ` Benjamin Herrenschmidt
2014-11-20 5:40 ` Wei Yang
2014-11-20 5:39 ` Wei Yang
2014-11-02 15:41 ` [PATCH V9 04/18] PCI: Take additional PF's IOV BAR alignment in sizing and assigning Wei Yang
2014-11-02 15:41 ` [PATCH V9 05/18] powerpc/pci: Add PCI resource alignment documentation Wei Yang
2014-11-02 15:41 ` [PATCH V9 06/18] powerpc/pci: Don't unset pci resources for VFs Wei Yang
2014-11-02 15:41 ` [PATCH V9 07/18] powerpc/pci: Define pcibios_disable_device() on powerpc Wei Yang
2014-11-02 15:41 ` [PATCH V9 08/18] powrepc/pci: Refactor pci_dn Wei Yang
2014-11-19 23:30 ` Bjorn Helgaas
2014-11-20 1:02 ` Gavin Shan
2014-11-20 7:25 ` Wei Yang
2014-11-20 7:20 ` Wei Yang
2014-11-20 19:05 ` Bjorn Helgaas
2014-11-21 0:04 ` Gavin Shan
2014-11-25 9:28 ` Wei Yang
2014-11-21 1:46 ` Wei Yang
2014-11-02 15:41 ` [PATCH V9 09/18] powerpc/pci: remove pci_dn->pcidev field Wei Yang
2014-11-02 15:41 ` [PATCH V9 10/18] powerpc/powernv: Use pci_dn in PCI config accessor Wei Yang
2014-11-02 15:41 ` [PATCH V9 11/18] powerpc/powernv: Allocate pe->iommu_table dynamically Wei Yang
2014-11-02 15:41 ` [PATCH V9 12/18] powerpc/powernv: Expand VF resources according to the number of total_pe Wei Yang
2014-11-02 15:41 ` [PATCH V9 13/18] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2014-11-02 15:41 ` [PATCH V9 14/18] powerpc/powernv: Implement pcibios_iov_resource_size() " Wei Yang
2014-11-02 15:41 ` [PATCH V9 15/18] powerpc/powernv: Shift VF resource with an offset Wei Yang
2014-11-02 15:41 ` [PATCH V9 16/18] powerpc/powernv: Allocate VF PE Wei Yang
2014-11-02 15:41 ` Wei Yang [this message]
2014-11-02 15:41 ` [PATCH V9 18/18] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2014-11-18 23:11 ` [PATCH V9 00/18] Enable SRIOV on PowerNV Gavin Shan
2014-11-18 23:40 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414942894-17034-18-git-send-email-weiyang@linux.vnet.ibm.com \
--to=weiyang@linux.vnet.ibm.com \
--cc=benh@au1.ibm.com \
--cc=bhelgaas@google.com \
--cc=gwshan@linux.vnet.ibm.com \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).