linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Wei Yang <weiyang@linux.vnet.ibm.com>
To: bhelgaas@google.com, benh@au1.ibm.com, gwshan@linux.vnet.ibm.com
Cc: linux-pci@vger.kernel.org, Wei Yang <weiyang@linux.vnet.ibm.com>,
	linuxppc-dev@lists.ozlabs.org
Subject: [PATCH V11 05/17] PCI: Take additional PF's IOV BAR alignment in sizing and assigning
Date: Thu, 15 Jan 2015 10:27:55 +0800	[thread overview]
Message-ID: <1421288887-7765-6-git-send-email-weiyang@linux.vnet.ibm.com> (raw)
In-Reply-To: <1421288887-7765-1-git-send-email-weiyang@linux.vnet.ibm.com>

At resource sizing/assigning stage, resources are divided into two lists,
requested list and additional list, while the alignement of the additional
IOV BAR is not taken into the sizing and assigning procedure.

This is reasonable in the original implementation, since IOV BAR's
alignment is mostly the size of a PF BAR alignemt. This means the alignment
is already taken into consideration. While this rule may be violated on
some platform, eg.  PowerNV platform.

This patch takes the additional IOV BAR alignment in sizing and assigning
stage explicitly. When system MMIO space is not enough, the PF's IOV BAR
alignment will not contribute to the bridge. When system MMIO space is
enough, the additional alignment will contribute to the bridge.

Also it take advantage of pci_dev_resource::min_align to store this
additional alignment.

Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
---
 drivers/pci/setup-bus.c |   85 +++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 71 insertions(+), 14 deletions(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 0482235..08252c7 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -99,8 +99,8 @@ static void remove_from_list(struct list_head *head,
 	}
 }
 
-static resource_size_t get_res_add_size(struct list_head *head,
-					struct resource *res)
+static struct pci_dev_resource *res_to_dev_res(struct list_head *head,
+					       struct resource *res)
 {
 	struct pci_dev_resource *dev_res;
 
@@ -109,17 +109,37 @@ static resource_size_t get_res_add_size(struct list_head *head,
 			int idx = res - &dev_res->dev->resource[0];
 
 			dev_printk(KERN_DEBUG, &dev_res->dev->dev,
-				 "res[%d]=%pR get_res_add_size add_size %llx\n",
+				 "res[%d]=%pR res_to_dev_res add_size %llx min_align %llx\n",
 				 idx, dev_res->res,
-				 (unsigned long long)dev_res->add_size);
+				 (unsigned long long)dev_res->add_size,
+				 (unsigned long long)dev_res->min_align);
 
-			return dev_res->add_size;
+			return dev_res;
 		}
 	}
 
-	return 0;
+	return NULL;
+}
+
+static resource_size_t get_res_add_size(struct list_head *head,
+					struct resource *res)
+{
+	struct pci_dev_resource *dev_res;
+
+	dev_res = res_to_dev_res(head, res);
+	return dev_res ? dev_res->add_size : 0;
+}
+
+static resource_size_t get_res_add_align(struct list_head *head,
+		struct resource *res)
+{
+	struct pci_dev_resource *dev_res;
+
+	dev_res = res_to_dev_res(head, res);
+	return dev_res ? dev_res->min_align : 0;
 }
 
+
 /* Sort resources by alignment */
 static void pdev_sort_resources(struct pci_dev *dev, struct list_head *head)
 {
@@ -368,8 +388,9 @@ static void __assign_resources_sorted(struct list_head *head,
 	LIST_HEAD(save_head);
 	LIST_HEAD(local_fail_head);
 	struct pci_dev_resource *save_res;
-	struct pci_dev_resource *dev_res, *tmp_res;
+	struct pci_dev_resource *dev_res, *tmp_res, *dev_res2;
 	unsigned long fail_type;
+	resource_size_t add_align, align;
 
 	/* Check if optional add_size is there */
 	if (!realloc_head || list_empty(realloc_head))
@@ -384,10 +405,38 @@ static void __assign_resources_sorted(struct list_head *head,
 	}
 
 	/* Update res in head list with add_size in realloc_head list */
-	list_for_each_entry(dev_res, head, list)
+	list_for_each_entry_safe(dev_res, tmp_res, head, list) {
 		dev_res->res->end += get_res_add_size(realloc_head,
 							dev_res->res);
 
+		/* 
+		 * There are two kinds additional resources in the list:
+		 * 1. bridge resource  -- IORESOURCE_STARTALIGN
+		 * 2. SRIOV resource   -- IORESOURCE_SIZEALIGN
+		 * Here just fix the additional alignment for bridge
+		 */
+		if (!(dev_res->res->flags & IORESOURCE_STARTALIGN))
+			continue;
+
+		add_align = get_res_add_align(realloc_head, dev_res->res);
+
+		/* Reorder the list by their alignment */
+		if (add_align > dev_res->res->start) {
+			dev_res->res->start = add_align;
+			dev_res->res->end = add_align +
+				            resource_size(dev_res->res);
+
+			list_for_each_entry(dev_res2, head, list) {
+				align = pci_resource_alignment(dev_res2->dev,
+							       dev_res2->res);
+				if (add_align > align)
+					list_move_tail(&dev_res->list,
+						       &dev_res2->list);
+			}
+               }
+
+	}
+
 	/* Try updated head list with add_size added */
 	assign_requested_resources_sorted(head, &local_fail_head);
 
@@ -930,6 +979,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 	struct resource *b_res = find_free_bus_resource(bus,
 					mask | IORESOURCE_PREFETCH, type);
 	resource_size_t children_add_size = 0;
+	resource_size_t children_add_align = 0;
+	resource_size_t add_align = 0;
 
 	if (!b_res)
 		return -ENOSPC;
@@ -954,6 +1005,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 			/* put SRIOV requested res to the optional list */
 			if (realloc_head && i >= PCI_IOV_RESOURCES &&
 					i <= PCI_IOV_RESOURCE_END) {
+				add_align = max(pci_resource_alignment(dev, r), add_align);
 				r->end = r->start - 1;
 				add_to_list(realloc_head, dev, r, r_size, 0/* don't care */);
 				children_add_size += r_size;
@@ -984,19 +1036,23 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 			if (order > max_order)
 				max_order = order;
 
-			if (realloc_head)
+			if (realloc_head) {
 				children_add_size += get_res_add_size(realloc_head, r);
+				children_add_align = get_res_add_align(realloc_head, r);
+				add_align = max(add_align, children_add_align);
+			}
 		}
 	}
 
 	min_align = calculate_mem_align(aligns, max_order);
 	min_align = max(min_align, window_alignment(bus, b_res->flags));
 	size0 = calculate_memsize(size, min_size, 0, resource_size(b_res), min_align);
+	add_align = max(min_align, add_align);
 	if (children_add_size > add_size)
 		add_size = children_add_size;
 	size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
 		calculate_memsize(size, min_size, add_size,
-				resource_size(b_res), min_align);
+				resource_size(b_res), add_align);
 	if (!size0 && !size1) {
 		if (b_res->start || b_res->end)
 			dev_info(&bus->self->dev, "disabling bridge window %pR to %pR (unused)\n",
@@ -1008,10 +1064,11 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 	b_res->end = size0 + min_align - 1;
 	b_res->flags |= IORESOURCE_STARTALIGN;
 	if (size1 > size0 && realloc_head) {
-		add_to_list(realloc_head, bus->self, b_res, size1-size0, min_align);
-		dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window %pR to %pR add_size %llx\n",
-			   b_res, &bus->busn_res,
-			   (unsigned long long)size1-size0);
+		add_to_list(realloc_head, bus->self, b_res, size1-size0, add_align);
+		dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window "
+				 "%pR to %pR add_size %llx add_align %llx\n", b_res,
+				 &bus->busn_res, (unsigned long long)size1-size0,
+				 (unsigned long long)add_align);
 	}
 	return 0;
 }
-- 
1.7.9.5

  parent reply	other threads:[~2015-01-15  2:28 UTC|newest]

Thread overview: 85+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-22  5:54 [PATCH V10 00/17] Enable SRIOV on Power8 Wei Yang
2014-12-22  5:54 ` [PATCH V10 01/17] PCI/IOV: Export interface for retrieve VF's BDF Wei Yang
2014-12-22  5:54 ` [PATCH V10 02/17] PCI/IOV: add VF enable/disable hook Wei Yang
2014-12-22  5:54 ` [PATCH V10 03/17] PCI: Add weak pcibios_iov_resource_alignment() interface Wei Yang
2014-12-22  5:54 ` [PATCH V10 04/17] PCI: Store VF BAR size in pci_sriov Wei Yang
2014-12-22  5:54 ` [PATCH V10 05/17] PCI: Take additional PF's IOV BAR alignment in sizing and assigning Wei Yang
2014-12-22  5:54 ` [PATCH V10 06/17] powerpc/pci: Add PCI resource alignment documentation Wei Yang
2014-12-22  5:54 ` [PATCH V10 07/17] powerpc/pci: Don't unset pci resources for VFs Wei Yang
2014-12-22  5:54 ` [PATCH V10 08/17] powrepc/pci: Refactor pci_dn Wei Yang
2014-12-22  5:54 ` [PATCH V10 09/17] powerpc/pci: remove pci_dn->pcidev field Wei Yang
2014-12-22  5:54 ` [PATCH V10 10/17] powerpc/powernv: Use pci_dn in PCI config accessor Wei Yang
2014-12-22  5:54 ` [PATCH V10 11/17] powerpc/powernv: Allocate pe->iommu_table dynamically Wei Yang
2014-12-22  5:54 ` [PATCH V10 12/17] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe Wei Yang
2014-12-22  5:54 ` [PATCH V10 13/17] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2014-12-22  5:54 ` [PATCH V10 14/17] powerpc/powernv: Shift VF resource with an offset Wei Yang
2014-12-22  5:54 ` [PATCH V10 15/17] powerpc/powernv: Allocate VF PE Wei Yang
2014-12-22  5:54 ` [PATCH V10 16/17] powerpc/powernv: Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2014-12-22  5:54 ` [PATCH V10 17/17] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2014-12-22  6:05 ` [PATCH V10 00/17] Enable SRIOV on Power8 Wei Yang
2015-01-13 18:05   ` Bjorn Helgaas
2015-01-15  2:27     ` [PATCH V11 " Wei Yang
2015-01-15  2:27       ` [PATCH V11 01/17] PCI/IOV: Export interface for retrieve VF's BDF Wei Yang
2015-02-20 23:09         ` Bjorn Helgaas
2015-03-02  6:05           ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 02/17] PCI/IOV: add VF enable/disable hook Wei Yang
2015-02-10  0:26         ` Benjamin Herrenschmidt
2015-02-10  1:35           ` Wei Yang
2015-02-10  2:13             ` Benjamin Herrenschmidt
2015-02-10  6:18               ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 03/17] PCI: Add weak pcibios_iov_resource_alignment() interface Wei Yang
2015-02-10  0:32         ` Benjamin Herrenschmidt
2015-02-10  1:44           ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 04/17] PCI: Store VF BAR size in pci_sriov Wei Yang
2015-01-15  2:27       ` Wei Yang [this message]
2015-01-15  2:27       ` [PATCH V11 06/17] powerpc/pci: Add PCI resource alignment documentation Wei Yang
2015-02-04 23:44         ` Bjorn Helgaas
2015-02-10  1:02           ` Benjamin Herrenschmidt
2015-02-20  0:56             ` Bjorn Helgaas
2015-02-20  2:41               ` Benjamin Herrenschmidt
2015-01-15  2:27       ` [PATCH V11 07/17] powerpc/pci: Don't unset pci resources for VFs Wei Yang
2015-02-10  0:36         ` Benjamin Herrenschmidt
2015-02-10  1:51           ` Wei Yang
2015-02-10  2:14             ` Benjamin Herrenschmidt
2015-02-10  6:25               ` Wei Yang
2015-02-10  8:14                 ` Benjamin Herrenschmidt
2015-02-20 23:47                   ` Bjorn Helgaas
2015-03-02  6:09                     ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 08/17] powrepc/pci: Refactor pci_dn Wei Yang
2015-02-20 23:19         ` Bjorn Helgaas
2015-02-23  0:13           ` Gavin Shan
2015-02-24  8:13             ` Bjorn Helgaas
2015-02-24  8:25               ` Benjamin Herrenschmidt
2015-01-15  2:27       ` [PATCH V11 09/17] powerpc/pci: remove pci_dn->pcidev field Wei Yang
2015-01-15  2:28       ` [PATCH V11 10/17] powerpc/powernv: Use pci_dn in PCI config accessor Wei Yang
2015-01-15  2:28       ` [PATCH V11 11/17] powerpc/powernv: Allocate pe->iommu_table dynamically Wei Yang
2015-01-15  2:28       ` [PATCH V11 12/17] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe Wei Yang
2015-02-04 21:26         ` Bjorn Helgaas
2015-02-04 23:08           ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 13/17] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2015-02-04 21:26         ` Bjorn Helgaas
2015-02-04 22:45           ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 14/17] powerpc/powernv: Shift VF resource with an offset Wei Yang
2015-01-30 23:08         ` Bjorn Helgaas
2015-02-03  1:30           ` Wei Yang
2015-02-03  7:01           ` [PATCH] powerpc/powernv: make sure the IOV BAR will not exceed limit after shifting Wei Yang
2015-02-04  0:19             ` Bjorn Helgaas
2015-02-04  3:34               ` Wei Yang
2015-02-04 14:19                 ` Bjorn Helgaas
2015-02-04 15:20                   ` Wei Yang
2015-02-04 16:08                   ` [PATCH] pci/iov: fix memory leak introduced in "PCI: Store individual VF BAR size in struct pci_sriov" Wei Yang
2015-02-04 16:28                     ` Bjorn Helgaas
2015-02-04 20:53                 ` [PATCH] powerpc/powernv: make sure the IOV BAR will not exceed limit after shifting Bjorn Helgaas
2015-02-05  3:01                   ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 15/17] powerpc/powernv: Allocate VF PE Wei Yang
2015-01-15  2:28       ` [PATCH V11 16/17] powerpc/powernv: Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2015-02-04 22:05         ` Bjorn Helgaas
2015-02-05  0:07           ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 17/17] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2015-02-04 23:44       ` [PATCH V11 00/17] Enable SRIOV on Power8 Bjorn Helgaas
2015-02-05  0:13         ` Wei Yang
2015-02-05  6:34         ` [PATCH 0/3] Code adjustment on pci/virtualization Wei Yang
2015-02-05  6:34           ` [PATCH 1/3] fix on Store individual VF BAR size in struct pci_sriov Wei Yang
2015-02-05  6:34           ` [PATCH 2/3] fix Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2015-02-05  6:34           ` [PATCH 3/3] remove the unused end in pnv_pci_vf_resource_shift() Wei Yang
2015-02-10  0:25         ` [PATCH V11 00/17] Enable SRIOV on Power8 Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1421288887-7765-6-git-send-email-weiyang@linux.vnet.ibm.com \
    --to=weiyang@linux.vnet.ibm.com \
    --cc=benh@au1.ibm.com \
    --cc=bhelgaas@google.com \
    --cc=gwshan@linux.vnet.ibm.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).