[PATCH kernel v6 24/29] powerpc/powernv: Change prototypes to receive iommu

[Alexey Kardashevskiy <aik@ozlabs.ru>]

This changes few functions to receive a iommu_table_group pointer
rather than PE as they are going to be a part of upcoming
iommu_table_group_ops callback set.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index bdf511d..ca6c3f3 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1398,10 +1398,12 @@ static __be64 *pnv_alloc_tce_table(int nid,
 	return addr;
 }
 
-static long pnv_pci_ioda2_create_table(struct pnv_ioda_pe *pe,
+static long pnv_pci_ioda2_create_table(struct iommu_table_group *table_group,
 		__u32 page_shift, __u64 window_size, __u32 levels,
 		struct iommu_table *tbl)
 {
+	struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe,
+						table_group);
 	int nid = pe->phb->hose->node;
 	void *addr;
 	unsigned long tce_table_size, left;
@@ -1456,9 +1458,11 @@ static void pnv_pci_free_table(struct iommu_table *tbl)
 	iommu_reset_table(tbl, "ioda2");
 }
 
-static long pnv_pci_ioda2_set_window(struct pnv_ioda_pe *pe,
+static long pnv_pci_ioda2_set_window(struct iommu_table_group *table_group,
 		struct iommu_table *tbl)
 {
+	struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe,
+			table_group);
 	struct pnv_phb *phb = pe->phb;
 	const __be64 *swinvp;
 	int64_t rc;
@@ -1591,12 +1595,11 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 
 	/* The PE will reserve all possible 32-bits space */
 	pe->tce32_seg = 0;
-
 	end = (1 << ilog2(phb->ioda.m32_pci_base));
 	pe_info(pe, "Setting up 32-bit TCE table at 0..%08x\n",
 		end);
 
-	rc = pnv_pci_ioda2_create_table(pe, IOMMU_PAGE_SHIFT_4K,
+	rc = pnv_pci_ioda2_create_table(&pe->table_group, IOMMU_PAGE_SHIFT_4K,
 			phb->ioda.m32_pci_base,
 			POWERNV_IOMMU_DEFAULT_LEVELS, tbl);
 	if (rc) {
@@ -1609,7 +1612,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 	iommu_init_table(tbl, phb->hose->node);
 	pe->table_group.ops = &pnv_pci_ioda2_ops;
 
-	rc = pnv_pci_ioda2_set_window(pe, tbl);
+	rc = pnv_pci_ioda2_set_window(&pe->table_group, tbl);
 	if (rc) {
 		pe_err(pe, "Failed to configure 32-bit TCE table,"
 		       " err %ld\n", rc);
-- 
2.0.0