From: "Cédric Le Goater" <clg@fr.ibm.com>
To: lm-sensors@lm-sensors.org
Cc: "Stewart Smith" <stewart@linux.vnet.ibm.com>,
"Cédric Le Goater" <clg@fr.ibm.com>,
"Jean Delvare" <jdelvare@suse.de>,
"Neelesh Gupta" <neelegup@linux.vnet.ibm.com>,
skiboot@lists.ozlabs.org, linuxppc-dev@lists.ozlabs.org,
"Guenter Roeck" <linux@roeck-us.net>
Subject: [PATCH v2 1/5] hwmon: (ibmpowernv) replace AMBIENT_TEMP by TEMP
Date: Thu, 19 Mar 2015 18:44:41 +0100 [thread overview]
Message-ID: <1426787085-9004-2-git-send-email-clg@fr.ibm.com> (raw)
In-Reply-To: <1423117857-32759-1-git-send-email-clg@fr.ibm.com>
Ambient is too restrictive as there can be other temperature channels :
core, memory, etc.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
---
drivers/hwmon/ibmpowernv.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
Index: linux.git/drivers/hwmon/ibmpowernv.c
===================================================================
--- linux.git.orig/drivers/hwmon/ibmpowernv.c
+++ linux.git/drivers/hwmon/ibmpowernv.c
@@ -44,7 +44,7 @@
*/
enum sensors {
FAN,
- AMBIENT_TEMP,
+ TEMP,
POWER_SUPPLY,
POWER_INPUT,
MAX_SENSOR_TYPE,
@@ -87,7 +87,7 @@ static ssize_t show_sensor(struct device
return ret;
/* Convert temperature to milli-degrees */
- if (sdata->type == AMBIENT_TEMP)
+ if (sdata->type == TEMP)
x *= 1000;
/* Convert power to micro-watts */
else if (sdata->type == POWER_INPUT)
@@ -154,7 +154,7 @@ static int create_hwmon_attr_name(struct
} else if (!strcmp(attr_suffix, DT_DATA_ATTR_SUFFIX)) {
attr_name = "input";
} else if (!strcmp(attr_suffix, DT_THRESHOLD_ATTR_SUFFIX)) {
- if (type == AMBIENT_TEMP)
+ if (type == TEMP)
attr_name = "max";
else if (type == FAN)
attr_name = "min";
next prev parent reply other threads:[~2015-03-19 17:44 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1423117857-32759-1-git-send-email-clg@fr.ibm.com>
2015-02-20 15:07 ` [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support Cédric Le Goater
2015-02-20 16:52 ` Guenter Roeck
2015-02-20 20:15 ` Cedric Le Goater
2015-02-20 23:52 ` Guenter Roeck
2015-02-21 7:14 ` Cedric Le Goater
2015-02-21 11:03 ` Guenter Roeck
2015-02-23 10:54 ` Cedric Le Goater
2015-02-20 15:07 ` [RFC PATCH 1/3] powerpc/powernv: Check OPAL sensor calls exist Cédric Le Goater
2015-02-20 16:53 ` Guenter Roeck
2015-02-20 20:18 ` Cedric Le Goater
2015-02-24 4:54 ` Michael Ellerman
2015-02-25 17:28 ` Cedric Le Goater
2015-02-20 15:07 ` [RFC PATCH 2/3] powerpc/powernv: handle OPAL_SUCCESS return in opal_sensor_read Cédric Le Goater
2015-02-20 15:07 ` [RFC PATCH 3/3] hwmon: (ibmpowernv) add DTS support Cédric Le Goater
2015-03-18 15:47 ` [PATCH 0/5] hwmon: (ibmpowernv) remove dependency on OPAL index Cédric Le Goater
2015-03-19 4:05 ` Guenter Roeck
2015-03-18 15:47 ` [PATCH 1/5] hwmon: (ibmpowernv) replace AMBIENT_TEMP by TEMP Cédric Le Goater
2015-03-18 15:47 ` [PATCH 2/5] hwmon: (ibmpowernv) add a get_sensor_type() routine Cédric Le Goater
2015-03-18 15:47 ` [PATCH 3/5] hwmon: (ibmpowernv) add a convert_opal_attr_name() routine Cédric Le Goater
2015-03-19 3:58 ` Guenter Roeck
2015-03-18 15:47 ` [PATCH 4/5] hwmon: (ibmpowernv) change create_hwmon_attr_name() prototype Cédric Le Goater
2015-03-19 4:02 ` Guenter Roeck
2015-03-18 15:47 ` [PATCH 5/5] hwmon: (ibmpowernv) do not use the OPAL index for hwmon attribute names Cédric Le Goater
2015-03-19 17:44 ` [PATCH v2 0/5] hwmon: (ibmpowernv) remove dependency on OPAL index Cédric Le Goater
2015-03-20 15:26 ` Guenter Roeck
2015-03-20 16:52 ` Cedric Le Goater
2015-04-01 10:15 ` [PATCH 0/4] hwmon: (ibmpowernv) add DTS support Cédric Le Goater
2015-04-01 10:15 ` [PATCH 1/4] hwmon: (ibmpowernv) add a helper routine create_hwmon_attr Cédric Le Goater
2015-04-01 10:15 ` [PATCH 2/4] hwmon: (ibmpowernv) add support for the new device tree Cédric Le Goater
2015-04-01 10:15 ` [PATCH 3/4] hwmon: (ibmpowernv) add a label attribute Cédric Le Goater
2015-04-01 10:15 ` [PATCH 4/4] hwmon: (ibmpowernv) pretty print labels Cédric Le Goater
2015-04-03 15:49 ` Guenter Roeck
2015-04-07 14:42 ` Cedric Le Goater
2015-04-07 14:45 ` Cédric Le Goater
2015-04-07 16:44 ` Guenter Roeck
2015-04-07 18:03 ` Cedric Le Goater
2015-04-07 19:22 ` Guenter Roeck
2015-04-08 6:57 ` Cedric Le Goater
2015-04-07 20:22 ` [Skiboot] " Benjamin Herrenschmidt
2015-03-19 17:44 ` Cédric Le Goater [this message]
2015-03-19 17:44 ` [PATCH v2 2/5] hwmon: (ibmpowernv) add a get_sensor_type() routine Cédric Le Goater
2015-03-19 17:44 ` [PATCH v2 3/5] hwmon: (ibmpowernv) add a convert_opal_attr_name() routine Cédric Le Goater
2015-03-19 17:44 ` [PATCH v2 4/5] hwmon: (ibmpowernv) change create_hwmon_attr_name() prototype Cédric Le Goater
2015-03-20 8:06 ` Cedric Le Goater
2015-03-20 15:27 ` Guenter Roeck
2015-03-19 17:44 ` [PATCH v2 5/5] hwmon: (ibmpowernv) do not use the OPAL index for hwmon attribute names Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426787085-9004-2-git-send-email-clg@fr.ibm.com \
--to=clg@fr.ibm.com \
--cc=jdelvare@suse.de \
--cc=linux@roeck-us.net \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lm-sensors@lm-sensors.org \
--cc=neelegup@linux.vnet.ibm.com \
--cc=skiboot@lists.ozlabs.org \
--cc=stewart@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).