From: Wei Yang <weiyang@linux.vnet.ibm.com>
To: aik@ozlabs.ru, gwshan@linux.vnet.ibm.com, benh@kernel.crashing.org
Cc: linuxppc-dev@ozlabs.org, Wei Yang <weiyang@linux.vnet.ibm.com>
Subject: [PATCH V2 1/6] powerpc/powernv: don't enable SRIOV when VF BAR contains non M64 BAR
Date: Wed, 5 Aug 2015 09:24:58 +0800 [thread overview]
Message-ID: <1438737903-10399-2-git-send-email-weiyang@linux.vnet.ibm.com> (raw)
In-Reply-To: <1438737903-10399-1-git-send-email-weiyang@linux.vnet.ibm.com>
On PHB_IODA2, we enable SRIOV devices by mapping IOV BAR with M64 BARs. If
a SRIOV device's BAR is not 64-bit prefetchable, this is not assigned from
M64 windwo, which means M64 BAR can't work on it.
This patch makes this explicit.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 25 +++++++++----------------
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 5738d31..9b41dba 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -908,9 +908,6 @@ static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
if (!res->flags || !res->parent)
continue;
- if (!pnv_pci_is_mem_pref_64(res->flags))
- continue;
-
/*
* The actual IOV BAR range is determined by the start address
* and the actual size for num_vfs VFs BAR. This check is to
@@ -939,9 +936,6 @@ static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
if (!res->flags || !res->parent)
continue;
- if (!pnv_pci_is_mem_pref_64(res->flags))
- continue;
-
size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
res2 = *res;
res->start += size * offset;
@@ -1221,9 +1215,6 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs)
if (!res->flags || !res->parent)
continue;
- if (!pnv_pci_is_mem_pref_64(res->flags))
- continue;
-
for (j = 0; j < vf_groups; j++) {
do {
win = find_next_zero_bit(&phb->ioda.m64_bar_alloc,
@@ -1510,6 +1501,12 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
pdn = pci_get_pdn(pdev);
if (phb->type == PNV_PHB_IODA2) {
+ if (!pdn->vfs_expanded) {
+ dev_info(&pdev->dev, "don't support this SRIOV device"
+ " with non M64 VF BAR\n");
+ return -EBUSY;
+ }
+
/* Calculate available PE for required VFs */
mutex_lock(&phb->ioda.pe_alloc_mutex);
pdn->offset = bitmap_find_next_zero_area(
@@ -2774,9 +2771,10 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
if (!res->flags || res->parent)
continue;
if (!pnv_pci_is_mem_pref_64(res->flags)) {
- dev_warn(&pdev->dev, " non M64 VF BAR%d: %pR\n",
+ dev_warn(&pdev->dev, "Don't support SR-IOV with"
+ " non M64 VF BAR%d: %pR. \n",
i, res);
- continue;
+ return;
}
size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES);
@@ -2795,11 +2793,6 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
res = &pdev->resource[i + PCI_IOV_RESOURCES];
if (!res->flags || res->parent)
continue;
- if (!pnv_pci_is_mem_pref_64(res->flags)) {
- dev_warn(&pdev->dev, "Skipping expanding VF BAR%d: %pR\n",
- i, res);
- continue;
- }
dev_dbg(&pdev->dev, " Fixing VF BAR%d: %pR to\n", i, res);
size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES);
--
1.7.9.5
next prev parent reply other threads:[~2015-08-05 1:26 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-29 7:22 [PATCH] powerpc/powernv: use one M64 BAR in Single PE mode for one VF BAR Wei Yang
2015-07-30 1:15 ` Gavin Shan
2015-07-30 5:43 ` Wei Yang
2015-07-31 0:13 ` Gavin Shan
2015-07-31 2:01 ` Wei Yang
2015-08-05 1:24 ` [PATCH V2 0/6] Redesign SR-IOV on PowerNV Wei Yang
2015-08-05 1:24 ` Wei Yang [this message]
2015-08-06 4:35 ` [PATCH V2 1/6] powerpc/powernv: don't enable SRIOV when VF BAR contains non M64 BAR Gavin Shan
2015-08-06 6:10 ` Alexey Kardashevskiy
2015-08-06 6:57 ` Gavin Shan
2015-08-06 7:47 ` Alexey Kardashevskiy
2015-08-06 11:07 ` Gavin Shan
2015-08-06 14:13 ` Wei Yang
2015-08-07 1:24 ` Alexey Kardashevskiy
2015-08-06 14:10 ` Wei Yang
2015-08-07 1:20 ` Gavin Shan
2015-08-07 2:24 ` Wei Yang
2015-08-07 3:50 ` Gavin Shan
2015-08-07 7:14 ` Alexey Kardashevskiy
2015-08-10 1:40 ` Wei Yang
2015-08-05 1:24 ` [PATCH V2 2/6] powerpc/powernv: simplify the calculation of iov resource Wei Yang
2015-08-06 4:51 ` Gavin Shan
2015-08-06 9:00 ` Alexey Kardashevskiy
2015-08-06 9:41 ` Wei Yang
2015-08-06 10:15 ` Alexey Kardashevskiy
2015-08-07 1:36 ` Wei Yang
2015-08-06 13:49 ` Wei Yang
2015-08-07 1:08 ` Gavin Shan
2015-08-05 1:25 ` [PATCH V2 3/6] powerpc/powernv: use one M64 BAR in Single PE mode for one VF BAR Wei Yang
2015-08-06 5:20 ` Gavin Shan
2015-08-06 9:36 ` Wei Yang
2015-08-06 10:07 ` Gavin Shan
2015-08-07 1:48 ` Wei Yang
2015-08-07 8:13 ` Alexey Kardashevskiy
2015-08-06 10:04 ` Alexey Kardashevskiy
2015-08-07 2:01 ` Wei Yang
2015-08-07 8:59 ` Alexey Kardashevskiy
2015-08-10 1:48 ` Wei Yang
2015-08-05 1:25 ` [PATCH V2 4/6] powerpc/powernv: replace the hard coded boundary with gate Wei Yang
2015-08-06 5:26 ` Gavin Shan
2015-08-07 9:11 ` Alexey Kardashevskiy
2015-08-05 1:25 ` [PATCH V2 5/6] powerpc/powernv: boundary the total vf bar size instead of the individual one Wei Yang
2015-08-06 5:28 ` Gavin Shan
2015-08-06 14:03 ` Wei Yang
2015-08-07 1:23 ` Gavin Shan
2015-08-07 2:25 ` Wei Yang
2015-08-05 1:25 ` [PATCH V2 6/6] powerpc/powernv: allocate discrete PE# when using M64 BAR in Single PE mode Wei Yang
2015-08-06 5:36 ` Gavin Shan
2015-08-06 13:41 ` Wei Yang
2015-08-07 1:36 ` Gavin Shan
2015-08-07 2:33 ` Wei Yang
2015-08-07 3:43 ` Gavin Shan
2015-08-07 5:44 ` Wei Yang
2015-08-07 5:54 ` Gavin Shan
2015-08-07 6:25 ` Wei Yang
2015-08-07 10:00 ` Alexey Kardashevskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438737903-10399-2-git-send-email-weiyang@linux.vnet.ibm.com \
--to=weiyang@linux.vnet.ibm.com \
--cc=aik@ozlabs.ru \
--cc=benh@kernel.crashing.org \
--cc=gwshan@linux.vnet.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).