From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
benh@kernel.crashing.org, mpe@ellerman.id.au, aik@ozlabs.ru,
bhelgaas@google.com, grant.likely@linaro.org,
robherring2@gmail.com, panto@antoniou-consulting.com,
frowand.list@gmail.com, Gavin Shan <gwshan@linux.vnet.ibm.com>
Subject: [PATCH v7 16/50] powerpc/powernv: Define PNV_IODA1_DMA32_SEGSIZE
Date: Thu, 5 Nov 2015 00:12:16 +1100 [thread overview]
Message-ID: <1446642770-4681-17-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1446642770-4681-1-git-send-email-gwshan@linux.vnet.ibm.com>
Currently, there is one macro (TCE32_TABLE_SIZE) representing the
TCE table size for one DMA32 segment. The constant representing
the DMA32 segment size (1 << 28) is still used in the code.
This defines PNV_IODA1_DMA32_SEGSIZE representing one DMA32
segment size. the TCE table size can be calcualted when the page
has fixed 4KB size. So all the related calculation depends on one
macro (PNV_IODA1_DMA32_SEGSIZE). No logical changes introduced.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 27 ++++++++++++++-------------
arch/powerpc/platforms/powernv/pci.h | 1 +
2 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 8a19454..5a08e20 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -48,9 +48,6 @@
#include "powernv.h"
#include "pci.h"
-/* 256M DMA window, 4K TCE pages, 8 bytes TCE */
-#define TCE32_TABLE_SIZE ((0x10000000 / 0x1000) * 8)
-
#define POWERNV_IOMMU_DEFAULT_LEVELS 1
#define POWERNV_IOMMU_MAX_LEVELS 5
@@ -1853,7 +1850,7 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
struct page *tce_mem = NULL;
struct iommu_table *tbl;
- unsigned int i;
+ unsigned int tce32_segsz, i;
int64_t rc;
void *addr;
@@ -1873,29 +1870,31 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
/* Grab a 32-bit TCE table */
pe->tce32_seg = base;
pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
- (base << 28), ((base + segs) << 28) - 1);
+ base * PNV_IODA1_DMA32_SEGSIZE,
+ (base + segs) * PNV_IODA1_DMA32_SEGSIZE - 1);
/* XXX Currently, we allocate one big contiguous table for the
* TCEs. We only really need one chunk per 256M of TCE space
* (ie per segment) but that's an optimization for later, it
* requires some added smarts with our get/put_tce implementation
*/
+ tce32_segsz = PNV_IODA1_DMA32_SEGSIZE >> (IOMMU_PAGE_SHIFT_4K - 3);
tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL,
- get_order(TCE32_TABLE_SIZE * segs));
+ get_order(tce32_segsz * segs));
if (!tce_mem) {
pe_err(pe, " Failed to allocate a 32-bit TCE memory\n");
goto fail;
}
addr = page_address(tce_mem);
- memset(addr, 0, TCE32_TABLE_SIZE * segs);
+ memset(addr, 0, tce32_segsz * segs);
/* Configure HW */
for (i = 0; i < segs; i++) {
rc = opal_pci_map_pe_dma_window(phb->opal_id,
pe->pe_number,
base + i, 1,
- __pa(addr) + TCE32_TABLE_SIZE * i,
- TCE32_TABLE_SIZE, 0x1000);
+ __pa(addr) + tce32_segsz * i,
+ tce32_segsz, 0x1000);
if (rc) {
pe_err(pe, " Failed to configure 32-bit TCE table,"
" err %ld\n", rc);
@@ -1904,8 +1903,9 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
}
/* Setup linux iommu table */
- pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs,
- base << 28, IOMMU_PAGE_SHIFT_4K);
+ pnv_pci_setup_iommu_table(tbl, addr, tce32_segsz * segs,
+ base * PNV_IODA1_DMA32_SEGSIZE,
+ IOMMU_PAGE_SHIFT_4K);
/* OPAL variant of P7IOC SW invalidated TCEs */
if (phb->ioda.tce_inval_reg)
@@ -1935,7 +1935,7 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
if (pe->tce32_seg >= 0)
pe->tce32_seg = -1;
if (tce_mem)
- __free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs));
+ __free_pages(tce_mem, get_order(tce32_segsz * segs));
if (tbl) {
pnv_pci_unlink_table_and_group(tbl, &pe->table_group);
iommu_free_table(tbl, "pnv");
@@ -3216,7 +3216,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
mutex_init(&phb->ioda.pe_list_mutex);
/* Calculate how many 32-bit TCE segments we have */
- phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28;
+ phb->ioda.tce32_count = phb->ioda.m32_pci_base /
+ PNV_IODA1_DMA32_SEGSIZE;
#if 0 /* We should really do that ... */
rc = opal_pci_set_phb_mem_window(opal->phb_id,
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index c4019ac..46927ff 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -80,6 +80,7 @@ struct pnv_ioda_pe {
#define PNV_IODA1_M64_NUM 16 /* Number of M64 BARs */
#define PNV_IODA1_M64_SEGS 8 /* Segments per M64 BAR */
+#define PNV_IODA1_DMA32_SEGSIZE 0x10000000
#define PNV_PHB_FLAG_EEH (1 << 0)
--
2.1.0
next prev parent reply other threads:[~2015-11-04 13:13 UTC|newest]
Thread overview: 157+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-04 13:12 [PATCH v7 00/50] powerpc/powernv: PCI hotplug support Gavin Shan
2015-11-04 13:12 ` [PATCH v7 01/50] PCI: Add pcibios_setup_bridge() Gavin Shan
2015-11-04 13:12 ` [PATCH v7 02/50] powerpc/pci: Override pcibios_setup_bridge() Gavin Shan
2015-11-05 22:27 ` Daniel Axtens
2015-11-05 23:44 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 03/50] powerpc/pci: Cleanup on struct pci_controller_ops Gavin Shan
2015-11-05 22:32 ` Daniel Axtens
2015-11-05 23:45 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 04/50] powerpc/powernv: Cleanup on pnv_pci_ioda_controller_ops Gavin Shan
2015-11-05 22:28 ` Daniel Axtens
2015-11-06 1:09 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 05/50] powerpc/powernv: Drop pnv_ioda_setup_dev_PE() Gavin Shan
2015-11-04 13:12 ` [PATCH v7 06/50] powerpc/powernv: Drop phb->bdfn_to_pe() Gavin Shan
2015-11-04 13:12 ` [PATCH v7 07/50] powerpc/powernv: Reorder fields in struct pnv_phb Gavin Shan
2015-11-04 13:12 ` [PATCH v7 08/50] powerpc/powernv: Rename PE# " Gavin Shan
2015-11-16 8:01 ` Alexey Kardashevskiy
2015-11-17 1:22 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 09/50] powerpc/powernv: Fix initial IO and M32 segmap Gavin Shan
2015-11-04 13:12 ` [PATCH v7 10/50] powerpc/powernv: Simplify pnv_ioda_setup_pe_seg() Gavin Shan
2015-11-05 22:56 ` Daniel Axtens
2015-11-05 23:52 ` Gavin Shan
2015-11-16 8:01 ` Alexey Kardashevskiy
2015-11-17 0:54 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 11/50] powerpc/powernv: IO and M32 mapping based on PCI device resources Gavin Shan
2015-11-12 3:30 ` Daniel Axtens
2015-11-12 4:55 ` Gavin Shan
2015-11-16 8:01 ` Alexey Kardashevskiy
2015-11-17 1:33 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 12/50] powerpc/powernv: Track M64 segment consumption Gavin Shan
2015-11-12 4:18 ` Daniel Axtens
2015-11-16 8:01 ` Alexey Kardashevskiy
2015-11-17 1:04 ` Gavin Shan
2015-11-19 0:10 ` Alexey Kardashevskiy
2015-11-23 22:42 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 13/50] powerpc/powernv: Rename M64 related functions Gavin Shan
2015-11-04 13:12 ` [PATCH v7 14/50] powerpc/powernv: M64 support on P7IOC Gavin Shan
2015-11-16 8:01 ` Alexey Kardashevskiy
2015-11-17 1:37 ` Gavin Shan
2015-11-19 0:18 ` Alexey Kardashevskiy
2015-11-22 22:46 ` Gavin Shan
2015-11-16 8:02 ` Alexey Kardashevskiy
2015-11-17 1:38 ` Gavin Shan
2015-11-17 2:11 ` Alexey Kardashevskiy
2015-11-17 2:44 ` Gavin Shan
2015-11-16 8:02 ` Alexey Kardashevskiy
2015-11-17 1:42 ` Gavin Shan
2015-11-17 2:37 ` Alexey Kardashevskiy
2015-11-17 3:04 ` Gavin Shan
2015-11-17 3:40 ` Benjamin Herrenschmidt
2015-11-17 4:43 ` Alexey Kardashevskiy
2015-11-17 8:44 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 15/50] powerpc/powernv: Rename pnv_pci_ioda_setup_dma_pe() Gavin Shan
2015-11-04 13:12 ` Gavin Shan [this message]
2015-11-04 13:12 ` [PATCH v7 17/50] powerpc/powernv: Avoid calculating DMA32 segments on PHB3 Gavin Shan
2015-11-17 1:07 ` Alexey Kardashevskiy
2015-11-17 8:48 ` Gavin Shan
2015-11-17 23:59 ` Alexey Kardashevskiy
2015-11-04 13:12 ` [PATCH v7 18/50] powerpc/powernv: Remove DMA32 PE list Gavin Shan
2015-11-17 1:54 ` Alexey Kardashevskiy
2015-11-17 2:01 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 19/50] powerpc/powernv: Track DMA32 segment consumption Gavin Shan
2015-11-17 0:28 ` Daniel Axtens
2015-11-17 1:55 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 20/50] powerpc/powernv: Improve DMA32 segment calculation Gavin Shan
2015-11-20 3:14 ` Daniel Axtens
2015-11-04 13:12 ` [PATCH v7 21/50] powerpc/powernv: Increase PE# capacity Gavin Shan
2015-11-17 0:29 ` Daniel Axtens
2015-11-17 1:56 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 22/50] powerpc/powernv: Introduce pnv_ioda_init_pe() Gavin Shan
2015-11-17 0:30 ` Daniel Axtens
2015-11-17 1:58 ` Gavin Shan
2015-11-17 2:37 ` Alexey Kardashevskiy
2015-11-17 2:53 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 23/50] powerpc/powernv: Use PE instead of number during setup and release Gavin Shan
2015-11-17 5:08 ` Alexey Kardashevskiy
2015-11-17 9:03 ` Gavin Shan
2015-11-18 0:13 ` Alexey Kardashevskiy
2015-11-22 22:52 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 24/50] powerpc/powernv: Allocate PE# in reverse order Gavin Shan
2015-11-04 13:12 ` [PATCH v7 25/50] powerpc/powernv: Reserve PE for root bus Gavin Shan
2015-11-17 6:04 ` Alexey Kardashevskiy
2015-11-17 9:06 ` Gavin Shan
2015-11-19 0:21 ` Alexey Kardashevskiy
2015-11-04 13:12 ` [PATCH v7 26/50] powerpc/powernv: Create PEs at PCI hot plugging time Gavin Shan
2015-11-17 7:57 ` Alexey Kardashevskiy
2015-11-17 9:12 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 27/50] powerpc/powernv: Dynamically release PEs Gavin Shan
2015-11-18 2:23 ` Alexey Kardashevskiy
2015-11-23 23:06 ` Gavin Shan
2015-11-24 0:22 ` Alexey Kardashevskiy
2015-11-04 13:12 ` [PATCH v7 28/50] powerpc/pci: Rename pcibios_{add, remove}_pci_devices() Gavin Shan
2015-11-18 2:43 ` [PATCH v7 28/50] powerpc/pci: Rename pcibios_{add,remove}_pci_devices() Alexey Kardashevskiy
2015-11-23 23:08 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 29/50] powerpc/pci: Rename pcibios_find_pci_bus() Gavin Shan
2015-11-18 3:59 ` Alexey Kardashevskiy
2015-11-23 23:11 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 30/50] powerpc/pci: Move pci_find_bus_by_node() around Gavin Shan
2015-11-04 13:12 ` [PATCH v7 31/50] powerpc/pci: Export pci_add_device_node_info() Gavin Shan
2015-11-04 13:12 ` [PATCH v7 32/50] powerpc/pci: Introduce pci_remove_device_node_info() Gavin Shan
2015-11-04 13:12 ` [PATCH v7 33/50] powerpc/pci: Export pci_traverse_device_nodes() Gavin Shan
2015-11-18 3:14 ` Alexey Kardashevskiy
2015-11-23 23:23 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 34/50] powerpc/pci: Delay populating pdn Gavin Shan
2015-11-18 4:24 ` Alexey Kardashevskiy
2015-11-23 23:42 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 35/50] powerpc/pci: Don't scan empty slot Gavin Shan
2015-11-04 13:12 ` [PATCH v7 36/50] powerpc/pci: Update bridge windows on PCI plug Gavin Shan
2015-11-04 13:12 ` [PATCH v7 37/50] powerpc/powernv: Simplify pnv_eeh_reset() Gavin Shan
2015-11-12 5:11 ` Daniel Axtens
2015-11-12 6:11 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 38/50] powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus() Gavin Shan
2015-11-12 22:59 ` Daniel Axtens
2015-11-12 23:25 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 39/50] powerpc/powernv: Fundamental reset " Gavin Shan
2015-11-12 6:15 ` Gavin Shan
2015-11-13 0:08 ` Daniel Axtens
2015-11-13 0:20 ` Gavin Shan
2015-11-13 0:23 ` Benjamin Herrenschmidt
2015-11-13 0:23 ` Daniel Axtens
2015-11-04 13:12 ` [PATCH v7 40/50] powerpc/powernv: Support PCI slot ID Gavin Shan
2015-11-04 13:12 ` [PATCH v7 41/50] powerpc/powernv: Use firmware PCI slot reset infrastructure Gavin Shan
2015-11-04 13:12 ` [PATCH v7 42/50] powerpc/powernv: Functions to get/set PCI slot status Gavin Shan
2015-11-04 13:12 ` [PATCH v7 43/50] powerpc/powernv: Select OF_DYNAMIC Gavin Shan
2015-11-04 13:12 ` [PATCH v7 44/50] drivers/of: Split unflatten_dt_node() Gavin Shan
2015-11-04 18:43 ` Rob Herring
2015-11-04 23:05 ` Gavin Shan
2015-11-04 13:12 ` [PATCH v7 45/50] drivers/of: Avoid recursively calling unflatten_dt_node() Gavin Shan
2015-11-04 16:07 ` Rob Herring
2015-11-04 23:23 ` Gavin Shan
2015-11-04 23:26 ` Gavin Shan
2016-05-13 7:16 ` Geert Uytterhoeven
2016-05-13 11:31 ` [PATCH] drivers/of: Fix build warning in populate_node() Gavin Shan
2016-05-16 14:11 ` Rob Herring
2015-12-06 20:28 ` [PATCH v7 45/50] drivers/of: Avoid recursively calling unflatten_dt_node() Rob Herring
2015-12-06 21:49 ` Guenter Roeck
2015-12-06 23:54 ` Benjamin Herrenschmidt
2015-12-07 2:21 ` Guenter Roeck
2015-12-07 2:33 ` Rob Herring
2015-12-07 3:40 ` Guenter Roeck
2015-11-04 13:12 ` [PATCH v7 46/50] drivers/of: Rename unflatten_dt_node() Gavin Shan
2015-11-04 13:12 ` [PATCH v7 47/50] drivers/of: Specify parent node in of_fdt_unflatten_tree() Gavin Shan
2015-11-04 13:12 ` [PATCH v7 48/50] drivers/of: Return allocated memory from of_fdt_unflatten_tree() Gavin Shan
2015-11-04 13:12 ` [PATCH v7 49/50] drivers/of: Export OF changeset functions Gavin Shan
2015-11-04 16:12 ` Rob Herring
2015-11-04 23:23 ` Gavin Shan
2016-01-13 13:54 ` [v7,49/50] " Wolfram Sang
2016-01-13 21:18 ` Michael Ellerman
2016-01-13 21:20 ` Wolfram Sang
2016-01-13 23:53 ` Rob Herring
2016-01-14 7:28 ` Wolfram Sang
2015-11-04 13:12 ` [PATCH v7 50/50] PCI/hotplug: PowerPC PowerNV PCI hotplug driver Gavin Shan
2015-11-18 7:33 ` Alexey Kardashevskiy
2015-11-23 23:16 ` Gavin Shan
2015-11-09 3:09 ` [PATCH v7 00/50] powerpc/powernv: PCI hotplug support Gavin Shan
2015-11-09 4:24 ` Pramod Sudheendra
2015-11-09 4:29 ` Gavin Shan
2015-11-09 6:43 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446642770-4681-17-git-send-email-gwshan@linux.vnet.ibm.com \
--to=gwshan@linux.vnet.ibm.com \
--cc=aik@ozlabs.ru \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=frowand.list@gmail.com \
--cc=grant.likely@linaro.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=panto@antoniou-consulting.com \
--cc=robherring2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).