From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au
Cc: linuxppc-dev@lists.ozlabs.org,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH 43/65] powerpc/mm/radix: Pick the address layout for radix config
Date: Sun, 27 Mar 2016 13:53:51 +0530 [thread overview]
Message-ID: <1459067053-10835-43-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
In-Reply-To: <1459067053-10835-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com>
This is same as the generic code, but then we have to duplicate
because we need to enable enable this along with hash which set
HAVE_ARCH_UNMAPPED_AREA. Hash need special get_unmapped_area handling
because of limitations around base page size. With radix we don't have
such restrictions.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
arch/powerpc/mm/mmap.c | 109 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 109 insertions(+)
diff --git a/arch/powerpc/mm/mmap.c b/arch/powerpc/mm/mmap.c
index 0f0502e12f6c..001997c7299b 100644
--- a/arch/powerpc/mm/mmap.c
+++ b/arch/powerpc/mm/mmap.c
@@ -26,6 +26,8 @@
#include <linux/mm.h>
#include <linux/random.h>
#include <linux/sched.h>
+#include <linux/security.h>
+#include <linux/mman.h>
/*
* Top of mmap area (just below the process stack).
@@ -78,6 +80,111 @@ static inline unsigned long mmap_base(unsigned long rnd)
return PAGE_ALIGN(TASK_SIZE - gap - rnd);
}
+#ifdef CONFIG_PPC_RADIX_MMU
+/*
+ * Same function as generic code used only for radix, because we don't need to overload
+ * the generic one. But we will have to duplicate, because hash select
+ * HAVE_ARCH_UNMAPPED_AREA
+ */
+static unsigned long
+arch_radix_get_unmapped_area(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff,
+ unsigned long flags)
+{
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma;
+ struct vm_unmapped_area_info info;
+
+ if (len > TASK_SIZE - mmap_min_addr)
+ return -ENOMEM;
+
+ if (flags & MAP_FIXED)
+ return addr;
+
+ if (addr) {
+ addr = PAGE_ALIGN(addr);
+ vma = find_vma(mm, addr);
+ if (TASK_SIZE - len >= addr && addr >= mmap_min_addr &&
+ (!vma || addr + len <= vma->vm_start))
+ return addr;
+ }
+
+ info.flags = 0;
+ info.length = len;
+ info.low_limit = mm->mmap_base;
+ info.high_limit = TASK_SIZE;
+ info.align_mask = 0;
+ return vm_unmapped_area(&info);
+}
+
+static unsigned long
+arch_radix_get_unmapped_area_topdown(struct file *filp,
+ const unsigned long addr0,
+ const unsigned long len,
+ const unsigned long pgoff,
+ const unsigned long flags)
+{
+ struct vm_area_struct *vma;
+ struct mm_struct *mm = current->mm;
+ unsigned long addr = addr0;
+ struct vm_unmapped_area_info info;
+
+ /* requested length too big for entire address space */
+ if (len > TASK_SIZE - mmap_min_addr)
+ return -ENOMEM;
+
+ if (flags & MAP_FIXED)
+ return addr;
+
+ /* requesting a specific address */
+ if (addr) {
+ addr = PAGE_ALIGN(addr);
+ vma = find_vma(mm, addr);
+ if (TASK_SIZE - len >= addr && addr >= mmap_min_addr &&
+ (!vma || addr + len <= vma->vm_start))
+ return addr;
+ }
+
+ info.flags = VM_UNMAPPED_AREA_TOPDOWN;
+ info.length = len;
+ info.low_limit = max(PAGE_SIZE, mmap_min_addr);
+ info.high_limit = mm->mmap_base;
+ info.align_mask = 0;
+ addr = vm_unmapped_area(&info);
+
+ /*
+ * A failed mmap() very likely causes application failure,
+ * so fall back to the bottom-up function here. This scenario
+ * can happen with large stack limits and large mmap()
+ * allocations.
+ */
+ if (addr & ~PAGE_MASK) {
+ VM_BUG_ON(addr != -ENOMEM);
+ info.flags = 0;
+ info.low_limit = TASK_UNMAPPED_BASE;
+ info.high_limit = TASK_SIZE;
+ addr = vm_unmapped_area(&info);
+ }
+
+ return addr;
+}
+
+static void arch_pick_radix_mmap_layout(struct mm_struct *mm,
+ unsigned long random_factor)
+{
+ if (mmap_is_legacy()) {
+ mm->mmap_base = TASK_UNMAPPED_BASE;
+ mm->get_unmapped_area = arch_radix_get_unmapped_area;
+ } else {
+ mm->mmap_base = mmap_base(random_factor);
+ mm->get_unmapped_area = arch_radix_get_unmapped_area_topdown;
+ }
+}
+#else
+/* dummy */
+extern void arch_pick_radix_mmap_layout(struct mm_struct *mm,
+ unsigned long random_factor);
+#endif
/*
* This function, called very early during the creation of a new
* process VM image, sets up which VM layout function to use:
@@ -89,6 +196,8 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
if (current->flags & PF_RANDOMIZE)
random_factor = arch_mmap_rnd();
+ if (radix_enabled())
+ return arch_pick_radix_mmap_layout(mm, random_factor);
/*
* Fall back to the standard layout if the personality
* bit is set, or if the expected stack growth is unlimited:
--
2.5.0
next prev parent reply other threads:[~2016-03-27 8:26 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-27 8:23 [PATCH 01/65] powerpc/mm: Use big endian page table for book3s 64 Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 02/65] powerpc/mm: use _PAGE_READ to indicate Read access Aneesh Kumar K.V
2016-03-27 15:35 ` Ian Munsie
2016-03-31 0:57 ` Balbir Singh
2016-04-04 14:55 ` Aneesh Kumar K.V
2016-04-05 3:25 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 03/65] powerpc/mm/subpage: Clear RWX bit to indicate no access Aneesh Kumar K.V
2016-03-31 1:42 ` Balbir Singh
2016-04-04 14:59 ` Aneesh Kumar K.V
2016-04-05 3:30 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 04/65] powerpc/mm: Use pte_user instead of opencoding Aneesh Kumar K.V
2016-03-31 1:45 ` Balbir Singh
2016-04-04 15:00 ` Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 05/65] powerpc/mm: Replace _PAGE_USER with _PAGE_PRIVILEGED Aneesh Kumar K.V
2016-03-27 15:41 ` Ian Munsie
2016-03-27 8:23 ` [PATCH 06/65] powerpc/cxl: Use REGION_ID instead of opencoding Aneesh Kumar K.V
2016-03-27 15:48 ` Ian Munsie
2016-03-27 8:23 ` [PATCH 07/65] powerpc/mm: Remove RPN_SHIFT and RPN_SIZE Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 08/65] powerpc/mm: Update _PAGE_KERNEL_RO Aneesh Kumar K.V
2016-04-05 7:45 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 09/65] powerpc/mm: Use helper for finding pte bits mapping I/O area Aneesh Kumar K.V
2016-04-05 11:47 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 10/65] powerpc/mm: Drop WIMG in favour of new constants Aneesh Kumar K.V
2016-04-05 13:25 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 11/65] powerpc/mm: Use generic version of pmdp_clear_flush_young Aneesh Kumar K.V
2016-04-05 23:51 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 12/65] powerpc/mm: Use generic version of ptep_clear_flush_young Aneesh Kumar K.V
2016-04-05 23:53 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 13/65] powerpc/mm: Move common data structure between radix and hash to book3s 64 generic headers Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 14/65] powerpc/mm/power9: Add partition table format Aneesh Kumar K.V
2016-04-06 6:11 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 15/65] powerpc/mm/hash: Add support for POWER9 hash Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 16/65] powerpc/mm: Move hash and no hash code to separate files Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 17/65] powerpc/mm/book3s: Rename hash specific PTE bits to carry H_ prefix Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 18/65] powerpc/mm: Handle _PTE_NONE_MASK Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 19/65] powerpc/mm: Move common pte bits and accessors to book3s/64/pgtable.h Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 20/65] powerpc/mm: Move pte accessors that operate on common pte bits to pgtable.h Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 21/65] powerpc/mm: Make page table size a variable Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 22/65] powerpc/mm: Move page table index and and vaddr to pgtable.h Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 23/65] powerpc/mm: Move pte related function together Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 24/65] powerpc/mm/radix: Add radix pte defines Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 25/65] powerpc/mm/radix: Dummy radix_enabled() Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 26/65] powerpc/mm: Add radix callbacks to pte accessors Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 27/65] powerpc/mm: Move hugetlb and THP related pmd accessors to pgtable.h Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 28/65] powerpc/mm/radix: Add radix callback for pmd accessors Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 29/65] powerpc/mm: Abstraction for early init routines Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 30/65] powerpc/mm/radix: Add radix callback " Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 31/65] powerpc/mm: Abstraction for vmemmap and map_kernel_page Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 32/65] powerpc/mm/radix: Add radix callback for vmemmap and map_kernel page Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 33/65] powerpc/mm: Abstraction for switch_mmu_context Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 34/65] powerpc/mm/radix: Add mmu context handling callback for radix Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 35/65] powerpc/mm: Rename mmu_context_hash64.c to mmu_context_book3s64.c Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 36/65] powerpc/mm: Hash linux abstraction for tlbflush routines Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 37/65] powerpc/mm/radix: Add " Aneesh Kumar K.V
2016-03-27 10:00 ` kbuild test robot
2016-03-28 17:58 ` Aneesh Kumar K.V
2016-03-27 10:09 ` kbuild test robot
2016-03-27 10:11 ` kbuild test robot
2016-03-27 8:23 ` [PATCH 38/65] powerpc/mm/radix: Add MMU_FTR_RADIX Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 39/65] powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 40/65] powerpc/mm/radix: Isolate hash table function from pseries guest code Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 41/65] powerpc/mm/radix: Add checks in slice code to catch radix usage Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 42/65] powerpc/mm/radix: Limit paca allocation in radix Aneesh Kumar K.V
2016-03-27 8:23 ` Aneesh Kumar K.V [this message]
2016-03-27 8:23 ` [PATCH 44/65] powerpc/mm/radix: Update secondary PTCR Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 45/65] powerpc/mm: Make a copy of pgalloc.h for 32 and 64 book3s Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 46/65] powerpc/mm: revert changes made to generic pgalloc-64.h Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 47/65] powerpc/mm: Copy pgalloc (part 2) Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 48/65] powerpc/mm: Simplify the code dropping 4 level table #ifdef Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 49/65] powerpc/mm: Rename function to indicate we are allocating fragments Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 50/65] powerpc/mm: make 4k and 64k use pte_t for pgtable_t Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 51/65] powerpc/mm: Add radix pgalloc details Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 52/65] powerpc/mm: Update pte filter for radix Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 53/65] powerpc/mm: VMALLOC abstraction Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 54/65] powerpc/radix: update mmu cache Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 55/65] powerpc/mm: pte_frag abstraction Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 56/65] powerpc/mm: Fix vma_mmu_pagesize for radix Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 57/65] powerpc/mm: Add radix support for hugetlb Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 58/65] powerpc/mm/radix: Make sure swapper pgdir is properly aligned Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 59/65] powerpc/mm/radix: Add hugetlb support 4K page size Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 60/65] powerpc/mm: Drop PTE_ATOMIC_UPDATES from pmd_hugepage_update Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 61/65] powerpc/mm: THP is only available on hash64 as of now Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 62/65] powerpc/mm/thp: Abstraction for THP functions Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 63/65] powerpc/mm/radix: Add radix THP callbacks Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 64/65] powerpc/mm/radix: Add THP support for 4k linux page size Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 65/65] powerpc/mm/radix: Cputable update for radix Aneesh Kumar K.V
2016-03-30 1:01 ` Michael Neuling
2016-04-01 6:25 ` Michael Ellerman
2016-04-01 9:34 ` Aneesh Kumar K.V
2018-06-28 23:55 ` Benjamin Herrenschmidt
2016-03-30 10:53 ` [PATCH 01/65] powerpc/mm: Use big endian page table for book3s 64 Balbir Singh
2016-04-04 15:03 ` Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459067053-10835-43-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).